Soil cultivation

Smooth coulter disc suitable for Kverneland

Smooth coulter disc suitable for Kverneland from European production. With 3 holes for attachment to the six-disc bearing. The hole circle diameter is 80mm and the center hole has a diameter of 55.5mm.

Socket � 12 x � 20 x 25 mm

Spacer disc � 19x30x3 mm

Spacer for flail knife 14x28x3mm

Spacer for attaching flail knives to mulchers and flail choppers

Straw knife suitable for Taarup, Ugerlose

System at the front

System at the front

System front part

Suitable for bird &~ Noot plow body M350, MPK400, MPK430, UL430, ULST430, UN300, UN350, UN400, UN430, UST400, WL430, WL430 PLUS, WS350, WS400, WX400 PLUS, WY350, WY400, WY400 PLUS

System front part AK10

Suitable for plow bodies B, C, BS40, BS42, US35, US40

System long

System long at the back

System long instead of Kverneland 073609

Can be used right and left

System short at the front

System short instead of Kverneland 073608

Can be used right and left

T-head screw too rough

M10x65.

Tine for rotary harrows instead of Lely & Lemken

Top quality harrow tines suitable for Lely and Lemken power harrows.

Tine holder for 70x12

Track eradicator 32x12 mm with share

The track loosener with a material thickness of 32x12mm comes complete with a rotating coulter. For heavy-duty use, the tines can be retrofitted with a reinforcement spring. These can be found under accessories below.

Track eradicator 40x10 mm with share

The track loosener with a material thickness of 40x10mm comes complete with a rotating coulter. For heavy-duty use, the tines can be retrofitted with a reinforcement spring. These can be found under accessories below.

Track eradicator with share

Without reinforcement spring, material 32x10 mm. Total length 570 mm.

Track eradicator with share

Without reinforcement spring, material 40x10 mm. Total length 785 mm.

U-bolt M12x1.75, R50x50

suitable for stripping tine order no. 54480

U-bolt M12x1.75, R80x80

suitable for stripping tine order no. 54480

U-nut M16x1.5, hole spacing 50mm

The U-nut with M16x1.5mm thread and hole spacing of 50mm is used to fasten rotary harrow tines. Using the U-nut reduces the time required and simplifies the assembly and disassembly of the rotary harrow tines.