Workshop equipment

​for cleaning carburetor parts, jewelry, watch straps, coins, collector's itemsEffectively removes dirtHousing, container and lid made of stainless steel (rustproof)Container size: 154 x 88 x 65 mmUltrasonic power: 35 wattsTime setting: 0 - 30 min (18 time steps)Ultrasonic frequency: 42 kHzTechnical dataLength: 128 mmWidth: 110 mmHeight: 180 mmGross weight: 1293 gMains frequency: 50 - 60 HzMains voltage (AC): 220 - 240 VCapacity: 0.7 l

Robust parts washer with hinged lid. Tub size approx. 75x50 cm. Capacity approx. 20 liters. With electric cleaning agent pump.

High-quality Eurol degreaser, composed of highly effective emulsifiers and solvents with low evaporation loss.Is recommended for the quick depreservation of new vehicles, for cleaning engine parts, machines, tanks, floors, walls, filters and workpieces. After rinsing with water, no layer of grease remains on the material. Plastics and rubber are not attacked by short contact, and the cleaner is suitable for all surfaces as the composition is pH-neutral. The cleaner is used undiluted and can be used several times.

Inexpensive maneuvering aid up to a tire width of 350 mm. Load capacity max. 450 kg. Easy maneuvering thanks to 4 smooth-running swivel castors. Delivery in pairs.

With hose (170cm) and suction pipe, for large areas and commercial use, required suction capacity of the compressor at least 500 L/min, grain size max. 0.8 mm.

Equipment details: Lid can be easily closed using screw locks12-volt fluorescent tube with 230-volt power supply and external switchSuitable for various blasting materials, e.g. quartz, glass spheres , plastic ball, etc.Ideal for cleaning, derusting or removing paint from all kinds of metal parts, e.g. engine parts, fittings, signs, housings, rims, hingesHigh-quality latex work gloves are secure connected to the housingOptimal visibility and occupational safety when processing workpieces due to the viewing window with glued-on protective filmDust-free work thanks to all-round seals on the lid and door framesStable storage grid enables Placing workpieces in the interior of the cabinWith drain opening for changing the blasting materialSuction pipe for the blasting material attached to the bottom of the collecting containerWith compressed air connection on the outside li>Glass bead blasting media, corundum blasting media, silicon carbide, plastic blasting media, etc. can be used  ~Technical data: Volume work cabin : 90lAir consumption: 200-350l/minWorking pressure: 2.8 - 8.0barCompressed air connection: 3/8"< li>Blast media core size: 0.42 - 0.125Inside dimensions: 580 x 480 x 300mmOutside dimensions: 590 x 489 x 490mmWeight: 17 .25kgInlet pressure max.: 8.6barMax. Weight on the support grid: 10kgMax. Weight of blasting material: 12kgHand hole diameter: 155mm

1 pair, universal, for sandblasting

Container capacity 1 L.

Powerful sandblasting gun with sand recovery thanks to a fine brush attachment, minimal dust and dirt development. Ideal for processing smaller areas/parts. Working pressure 6-8 bar, air consumption approx. 500 L/min. Suitable for steel granules from 0.2 - 0.8mm.

Practical, mechanical maneuvering aid, ideal even in confined spaces. The foot pedal is used to quickly and easily raise the tire or tires of the vehicle to be lifted, after which it can be moved in any direction without any problems. Load capacity 680kg per trolley, working width 320-640mm.

Practical workshop press with 20 T pressure force. Ideal for universal use such as pressing in shafts, pressing out bearings, bending pipes and shafts and much more. The press has a welded solid frame and 2 press blocks with V-support. Thanks to the large pressure gauge, the pressing pressure can be easily read at any time. The 2-stage hydraulic unit enables a large stroke and therefore quick work at low pressure as well as a small stroke at high pressure for precise work. Technical data: Dimensions: 1830 (incl. pressure gauge/1602 without) x 850x 540mm ~ HxWxD, passage: 540mm, support depth: 134mm, cylinder stroke: 180mm, dead weight: 100 kg

The WPP 30 EF is a robust press with conventional equipment. It has a maximum pressure force of 30 tons and is ideal for use in workshops, industry and agriculture. The press is easy to use and has a number of safety features. It is also equipped with a pressure gauge so that the pressure can be checked at any time. The WPP 30 EF is a reliable and versatile press suitable for a wide range of applications.Here are some of the advantages of the WPP 30 EF:Maximum pressure force of 30 tonsRobust constructionEasy to useEquipped with safety functionsEquipped with pressure gaugeVersatile in use The WPP 30 EF is an ideal press for anyone looking for a reliable and versatile machine for use in workshops, industry and agriculture.General informationPress force: 30t, piston stroke: 150mmPiston travel: 200mm Dimensions and weightsLength: ~ approx. 795mm, Width/Depth: approx. 700mm Height: approx.1830mm, weight: ~ approx. 167kg Clear width: 535mm, installation height max.: 1031mm Installation height min.: 151mm

Robust workshop press in high quality Made in Italy. Thanks to the laterally movable cylinder with 20 T pressure force, the press can be used very universally. This workshop press has hand and combined foot operation. This equipment makes precise (pressing in) work much easier for you. The delivery comes complete with pressure gauge, hand/foot lever and 2 pieces of prism support.Technical data:Pressure force: 20 TPassage light: 580mmPassage width: 125mmCylinder stroke: 150mmDead weight : 130 kgDimensions: 1870x920x500mm HxWxD