Tires

Flexible tractor/tractor front tire for fields and road transport, robust shoulder area, excellent tracking, good rolling behavior characterize this tire, also suitable for planting and seeding machines.

Water filling and emptying fitting for tractor tiresfor 1/2" hoseFill your tractor/tractor tires with water quickly and easily. The Hanauer Maus makes it possible. The venting valve with internal thread and venting hose is screwed onto the tire valve. Via the hose nozzle of the filling fitting you can connect a 1/2 inch water hose.Why fill water into tractor tires?When working with the front loader, it can happen that the tractor loses grip on the rear axle. Instead of additional weights that put pressure on the rear axle, we recommend adding water to fill the tractor tires. The center of gravity shifts downwards due to the water in the tractor tires. This also reduces the risk of the tractor tipping over when driving diagonally on slopes.How is the Hanauer Maus used?First jack up the tractor and loosen the valve insert carefully with a valve screwdriver. Once the air has escaped, you can safely remove the valve insert. Now turn the tire until the valve is at around 11 o'clock. After you have inserted the ventilation hose into the valve body, screw on the Hanauer Maus. In the next step, attach the 1/2 inch water hose to the hose nozzle of the Hanauer Maus. Once the optimal level has been reached, you can fill the tractor tire with air. To do this, screw in a valve insert suitable for air and water. Empty tractor tires with the Hanauer MouseJack up your tractor and turn the wheel until the valve body is at the lowest point. Now remove the valve insert and let the water drain out. To completely empty the tractor wheel, take the Hanauer Maus and screw it onto the valve body. Now remove the hose nozzle and screw the valve insert into the internal thread of the Hanauer Maus. Now connect the compressed air tire inflator to press the remaining water out of the vent valve.How the Hanauer Maus worksWhile you are filling your tractor tire with water, the air can escape through the vent valve at the same time. As soon as water comes out of the opening, the filling process is complete. If the Hanauer Maus is removed, the required 25% air remains in the tire.

The hand pump allows you to fill a tire even against the air pressure. However, the back pressure should not be higher than 2.0 bar. With high-pressure tires, the air must be released up to this limit.

with straight valve TR15

9 pieces, 7 patches, 1 tube of SVS solution 5 g, 1 rough paper. For bicycles, wheelbarrows, rotary haymakers,...

12 pieces, with 10 patches, 1 tube of SVS solution 10 g, 1 rough sheet. For cars, trailers,...

26 pieces, with 17 patches, 1 tube of SVS solution 25 g, 3 rough plates, 3 short valve inserts, for agricultural/construction machinery.

Linseal is not an adhesive, but a water-soluble liquid that contains rubber particles. The particles wedge themselves purely mechanically in the split rubber and, depending on the tire structure, seal punctures of up to 15 mm object diameter and also air loss between the tire and rim. Linseal is filled into the tire or tube via the valve stem.Properties:- reusable- applicable down to -25C- non-toxic- does not stick- remains liquid - washable with waterArea of application:Agriculture in general, industrial machinery, construction machinery, garden tools, wheelbarrows,... all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after.

Seals punctures of up to 15 mm object diameter and also air loss between tire and rim. Area of application: all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after, contents 25 liter canister

Increased service life thanks to carcass design, top quality, (without tube)

Increased service life thanks to carcass design (without tube)

Suitable for all tractor types~ Material: plastic, PE, UV stability, good cold flexibility and heat resistance, high tear resistance, good tensile strength, temperature range: -40C to +80C ~< br> ~

Increased service life thanks to carcass design (without tube)

Fine-groove design (for agricultural machinery and equipment up to max. 40 km/h), wheel with deep groove ball bearing

ideal for assembling and dismantling rubber tires in conjunction with steel, light alloy and plastic rims preferably used for assembly on cars and motorcyclesEasy to apply to the tire bead with a brush or spongeoptimal gliding properties combined with rubber care effectventilates quickly and thus guarantees a short-term, non-positive connection of the structural componentsalso suitable for wide tiresDelivered in a 5kg bucketAreas of application:Cars, vans and motorcycles

​Quick Sealing of Puncture Damage – Reliable and Directly on the Mounted TireThis repair compound is ideal for quickly sealing minor puncture damage – without removing the tire.Suitable for:Truck bias-ply tires up to 8 mm damageTractor and earthmover tires up to 15 mm damageAlso suitable for tubeless radial earthmover tires up to 40 km/h, in combination with a carbide cutter to remove the steel wire from the puncture channelScope of delivery:10 x Sealing elements2 x CEMENT SC-BL 40 g cans1 x Insertion awl for earthmover tires1 x Rasp Ø 6.5 m

Flat tire on the tire and the tread is still great?Trust in the 40-piece tire repair set and repair tire damage up to 6mm yourself, quickly and cost-effectively. Also great to use as a breakdown kit for the trunk. Here you get the safe, better and lasting alternative to rubber and tire sealant - repairsPlay it safe!.Suitable for all tubeless tires (except truck and tractor tires).Contents: 30 self-vulcanization strips, sealing lubricant , T-handle with 2 awls and counterholder, T-handle with spiral insert for preparing the damaged area, 5 valve inserts, 6-point wrench for changing the awls and the spiral insertProcedure for repair Locate damage, foreign body (screw, nail, etc. etc.) unscrew/pull out. Dip the spiral insert into the lubricant, clean the damage hole and thus smooth the wall at the same time, Insert the vulcanization strip into the awl, dip it in the grease and press it into the prepared damage hole until the two The ends of the strip still stick out about 2 cm. While holding the counter, slowly pull the awl out again. Cut off the ends. Done.Don't forget: refill with air

Special grassland tire, particularly durable with good lateral stability, for trailers in agricultural forestry,...

for tubeless tiresMetal valve TR 618AOuter diameter: 15.70mmLength: 50mm

for standard valves, length 125 mm