Automotive special

​For extracting engine, transmission and other lubricating oils, also suitable for other liquids with low viscosity, such as water and antifreezeCan be used in the car, motorcycle, shipbuilding and industrial sectorsCan be operated manually using a hand pump, making it independent of compressed airTransparent container for checking the fluid levelCapacity: 5.5 lWeight: 2.48 kgDimensions: approx. 220 x 220 x 600 mmScope of deliverySuction unitSuction pipe, Ø 10 mm, length 400 mmSuction pipe, Ø 6 mm, length 750 mm

The pole clamp and wiper arm puller allows all standard wiper arms to be removed without any problems. Best possible applications for corroded and stuck wiper arms or terminal clamps on the battery.Technical data:Clamping depth: 20 mmHook length: 7.0 mmGross weight: 380 gSpindle length: 53 mmSpin width min.: 10 mmSpin width max .: 35 mmHook foot depth: 4.5 mmHook foot thickness at the tip: 3.0 mm

for one-man operation, can also be used for coupling systems - working pressure 6-12 bar - includes a hose for suctioning liquids - dimensions: 225x135x192 mm (LxWxH).

enables a clean oil change by suction - suitable for engine, transmission and rear axle oils and other non-corrosive liquids - suction hose diameter in 9.8 - 8.0 - 6.7 - 4.5 mm for suction through the oil dipstick -Tube - 7.5 l container, with foot for a firm stand, for holding large amounts of oil - suitable for extracting oil from e.g. Smart but also for all other vehicles where an oil change needs to be carried out without using a lifting platform - with special silicone Brake bleeding hose with valve for one-handed operation - makes it easier to bleed brake systems on all vehicles - the built-in hand vacuum pump enables brake bleeding even without a compressed air connection.

For changing brake fluid quickly and easily. The 2-chamber system prevents the formation of air bubbles. Complete with 8-piece accessory set.

Universally applicable for turning back the brake pistons with 3/8" (10mm) drive.

Quality buttercup which is chrome-plated and ideal for the do-it-yourselfer. 10 -11- 12- 13- 14- 15- 16- 17- 18- 19mm.

The pull knife for glued windows is the perfect helper for dismantling glued windows. Working time savings of up to 70% are achieved by simply cutting through the adhesive bead on the window. The ergonomically shaped drawknife ensures optimal power transmission. This special tool is for the car workshop and hobby screwdrivers.hardened bladewith drawstring Aluminum

Practical help for rescue in inaccessible places. Flexible shaft with 700mm length, 4 arm claw, additionally with magnetic insert.

for storing 200 l drums or small containers according to declaration of conformity (HP) according to StawaR, approved for flammable liquids of GHS categories 1-3, water-polluting liquids of GHS categories 1-4 robust 3 mm sheet steel construction with galvanized grating with feet (the pallet truck must lift the tub between the feet) Load capacity 1000 kg/m Elaborately processed Z-edge for optimal hold of the grating Other technical properties Load capacity: 1000kg/m Weight: 70kg Color: gentian blue, RAL 5010

Innovative combination canister, can be used both as a portable canister and as an oil drain pan. Contents 7l capacity. Dimensions approx. 500x300x130mm.

With the compressed air brake bleeder set you can easily bleed your brakes without needing help. Bleeding can easily be done using standard workshop compressed air supply (6-12 bar). The brake system can be bled by just one person (one-man operation) and can also be used for clutch and steering systems. The brake bleeder removes fluid via the bleeder nipple, either for bleeding or complete fluid replacement. The 0.7L refill container prevents the expansion tank from being completely emptied.Brake bleeder capacity: approx. 1LCapacity of the refill container: approx. 0.7LAir consumption: 180L/minMetal plug: 1/4?(0.64cm)1 additional connection air requirement: 6-12 bar vacuum: 60%

The compression tester set for petrol engines allows you to easily measure the compression pressure of your petrol engine. The pressure gauge has a measuring range of 0 - 20 bar / 0 - 300 psi. In addition to the compression gauge, you will also receive 4 different spark plug thread adapters and 2 pressure pipes for quick measurements.Scope of delivery:Manometer: 0 - 20 bar / 0 - 300 psiHose length: 45 cmSpark plug adapter: 1 x M10 x 1.01 x M12 x 1.251 x M14 x 1.251 x M18 x 1.5 2 x pressure tube with rubber for quick measurements

You can use the constant velocity joint puller for almost all front-wheel drive vehicles. Instead of reaching for a hammer, simply install this new and inexpensive drive shaft puller from now on. Then, to loosen the constant velocity joints, use a pneumatic screwdriver and quickly remove the joint from the shaft in question. This cardan shaft puller is a part that every screwdriver needs in his workshop.

Practical cooling water jug with 8.5 liter capacity. Made of high-quality HD polyethylene (HD-PE), color dark anthracite. Dimensions: 639x167x316mm (lxwxh)

The trim wedge set is a practical helper when dismantling trim strips, rubber seals, door trim, switches, etc. The different shapes of the 6 wedges mean that they can also be used in very difficult-to-reach places. All tools are made of glass fiber reinforced plastic. This ensures stability and flexibility.

High-quality plumber's tool set in a practical PVC case.

For releasing the plastic clips on door panels, suitable for all vehicle types.

Open double ring wrench with a wrench size of 17 mm. Particularly suitable for hard-to-reach places, suitable for most diesel engines. Chrome-plated version, 12-point.

Inexpensive maneuvering aid up to a tire width of 350 mm. Load capacity max. 450 kg. Easy maneuvering thanks to 4 smooth-running swivel castors. Delivery in pairs.

For emergency opening of locked vehicles, made of alloy steel and plastic, delivered in a bag.

For expanding previously heated pipes, allows the installation of new exhaust pipes on old exhaust parts.In a set with 3 expanders: Expanding range 31-44mmExpanding range 39-61mmExpanding range 54-87mm

The exhaust pipe former set is ideal for bringing deformed exhaust pipes back into shape or expanding them. This makes it possible to install new exhaust parts without any problems.for expanding previously heated pipesenables the installation of new exhaust pipes on old exhaust partsExpander 1, expansion range from 31 to 44 mmExpander 2, expansion range from 39 to 61 mmExpander 3, expansion range from 54 to 87 mm

Hook set consisting of a 90 curved hook and an inwardly curved hook for removing rubber residue, exhaust gas deposits, etc.