Heating cables, heaters & transformers

​Suitable for all drinking bowls and trough drinkers with 24 V heatingtransforms the voltage from 230 V to 24 VShort-circuit and overload protection thanks to easily replaceable miniature fuse in the output circuitIntegrated self-resetting temperature limiter to protect against overheatingProtection class IP44 - When connecting the 230 V plug in an appropriate protective box: IP54Fully encapsulated housing: best possible protection against moisture, mechanical and electronic loadsWhich transformer is right for me?There are several things to consider when selecting a transformer: Drinking trough heating output, heating cable output and safety buffer.Example:2 drinking troughs with a heating capacity a'100 watts = 200 watts, 2 frost protection heating cables 1.5m a' 15 watts = 30 watts, 15 % safety buffer = 35 watts-> required transformer 300 watts

Circulation heater including circulation pump with integrated heating element for year-round operationThe ideal solution for supplying animals with tempered water.The constant water movement and the switchable heating offer double protection against freezing .3-stage switching: 0 = off, 1 = circulation mode, 2 = circulation and heating modeautomatic control of the set water temperatureautomatic safety shutdown in the event of overheating Quick vent valve on the radiator Easy installation by authorized specialists Low space requirement due to compact design Very maintenance-friendly Components can be quickly disconnected and dismantledFor drinking systems with a ring pipe length of max. 250 m (with pipe diameter 3/4?)Housing made of stainless steelCirculation pump with three different speed levels Technical data:- 230 V- power circulation pump 50 W- power heating element 3,000 W- water connection 1? (input + output)- water pressure max. 5 bar - Dimensions 520 x 410 x 285 mm (LxWxH) - Weight 6.7 kg - Protection class IPX4D - Temperature controller +5 - +35C - Factory setting +5 on +15C off ~Scope of delivery: ~< /strong>Circulation pump, flow pipe with integrated heating element, check valve, quick vent, pressure relief valve, pump screw connection G 1 "- Rp. 1" for circulation pump. ~PLEASE NOTE:The branch lines should be frost-free using heating cables be kept!The installation location of the pump should be protected from wind, weather and frost!Make sure that the pipeline is sufficiently insulated (20 mm) and avoid strong bends!It is recommended to have a pressure equalization vessel with a flow through it of the ring main to be installed in a frost-proof area (designed by a specialist installer, not included in delivery).With a 3/4? pipe diameter, up to 250 m of ring main is possible. Flow indicator and thermometer available as optional accessories ~ ~

​With float. DN25, 1” external thread. Suitable for circulation pump C10

​Frost monitor specially developed for use in harsh environments with splash-proof Schuko plug and coupling (IP44). The temperature range used closes the circuit with a single pole when temperatures fall to just above freezing point at approx. 3°C and opens when temperatures rise above 8°C. The cable has no power consumption!Total length 100 cmApplication:For connecting appliances which should only be switched on when there is a risk of frost and which no longer need to be operated when temperatures rise.Application examples:Heated watering troughs in agriculture (also for switching off the transformer)Infrared heat lamps (e.g. in calf igloos, calf pens, chicken coops, etc.)Frost monitor heaters in the house or garageConstruction site heatersGreenhouse heatersTechnical datamax. load: 1,000 wattsmax. current: 5 ASwitch-on temperature: 3°CSwitch-off temperature: 8°C (at 1,000 W)Degree of protection: IP68 for sensor housing, IP44 for plug and couplingCable: rubber cable 3x1.5 mm²Translated with www.DeepL.com/Translator (free version)

?to heat the branch line of drinking troughsa 24 V transformer is required for operation Heating cable frost-proof down to -45C< /ul>

Keeps your water pipe frost-free up to a maximum of -45 C! Integrated frost protection thermostat (switch-on temperature approx. +5 C, switch-off temperature approx. +13 C), not suitable for heating pipes, if there is additional insulation, do not insulate the thermostat. IPX7, VDE tested.What should you pay attention to with 230 V heating cables:The water pipe must be groundedthe 230 V-heating cables are ready to plug in and can be connected to a power supply with a circuit breaker (FI switch 30 mA).The heating cables must not be shortened and should therefore be ordered in the correct length Remaining lengths can be wrapped around the pipe in turns (note that a distance between turns of at least 15 mm must be maintained) Do not kink the heating cable and keep the maximum bending radius of approx . Observe 50 mmThe heating cables can be attached to the pipe with insulating tape or carefully with cable tiesWhen used on plastic pipes, the pipe must be covered with aluminum adhesive foil (e.g . B. 120087)The pipe and the heating cable should be insulated with a maximum insulation of 13 mmThe thermostat of the heating cable (always 2m away from the plug) should be on in the coldest position of the pipe The thermostat should be kept clear of the insulationDo not use 230 V heating cables in the browsing area of animals the installation Must be carried out by a qualified specialist in accordance with VDE0100 Power: 16 W / meterDo not install unprotected in the area where the animals are browsing - use here only 24 volt heating cable! Heating cable must not be shortened!

Original Suevia! For heating the branch line made of galvanized pipe or suitable plastic. Plastic cables must be wrapped with aluminum adhesive tape.24 V, 20 W, 2 m length.

Suitable for all pool and pipe heating systems, external probe ensures automatic switching on and off.IP 54, in a splash-proof housing. Max. permitted power 3.6 kW.Advantages:the frost protection installation is not switched on when there is no risk of frostthe thermostat automatically switches the frost protection elements off or on< /li>The response temperature is freely adjustable The frost protection thermostat should be installed in the coldest place.

​suitable for Suevia Mod. 41A, 43A, 46 (up to BJ 03/2012)Suevia original spare part number 102.0402

​with luster terminalsuitable for Suevia Mod. 46Suevia original spare part number 102.0671

​DN25. connection 1“ male thread 1” female thread/union. Thermometer readability 0-80° C. Suitable for circulation pump C10.

​The integrated 230-volt heating unit with 3 kW output, in combination with the highly efficient circulation pump (max. 45 W), ensures reliable frost protection while consuming little power. The pump is approved for use with drinking water and offers consistently high delivery performance.The ZPS ECO II comes with a wide range of accessories, including a check valve, vent valve, pressure relief valve, and T-piece. With a recommended pipe length of up to 250 m with a 1″ pipe diameter, it is ideal for many barn sizes.Technical data:Ready for wall mountingIntegrated 230 V heating unit (3 kW) with indicator light, thermostat, and temperature limiterHigh-efficiency pump (max. 45 W), approved for drinking waterPipe length: up to 250 m with a 1" pipe diameterConnection cable: 1.50 m (without power plug)Compact design – ideal for medium-sized stablesAccessories: check valve, vent valve, pressure relief valve, T-piece

​The ZPS PRO IDEAL circulation pump is delivered fully assembled and ready for connection, mounted on a stainless steel base plate.Equipped with a 3 kW heating element, it features a green indicator light, a thermostat, and a safety temperature limiter. The control box of the circulation pump for barns has a summer and winter operating mode. In summer, the ZPS PRO IDEAL circulation pump saves considerable energy costs because it only switches on every half hour instead of running continuously. This also prevents the pump rotor from seizing. Naturally, the heating element is switched off in summer. In winter, the circulation pump operates with thermostatically controlled heating. This ensures frost-free drinking troughs even in the depths of winter. The pipe length is approximately 250 meters with a 1-inch diameter, and the connection cable is 1.50 meters long (excluding the power plug). The Lister ZPS PRO IDEAL circulation pump comes with a check valve, a vent valve, a pressure relief valve, and a T-fitting.Using the ZPS PRO IDEAL Circulation PumpHave the ZPS PRO IDEAL circulation pump installed by an authorized professional in accordance with all applicable regulations. The circulation pump is designed to circulate the water supply for drinking troughs. The integrated heating element prevents the water from cooling down too much and freezing, thus ensuring frost-free drinking troughs. The ZPS PRO IDEAL is specifically designed for the demands of stables. It ensures efficient water circulation, which is essential for maintaining water quality in drinking troughs. Its use ensures that the water remains fresh, clean, and free of contaminants, which is of utmost importance for the health of the horses. Stagnant water quickly becomes contaminated with germs, but the water movement keeps it fresh and prevents germs from taking hold. Do you let your animals graze in the pasture during the winter? Then we have the perfect frost-free watering system for you: the DRINKING POST 2100 for horses – a frost-proof waterer that doesn't require electricity, the DRINKING POST 1800 for cattle – a frost-proof pasture waterer that doesn't require electricity, or the DRINKING POST 1200 for sheep!Information about the ZPS PRO IDEAL circulation pumpThanks to its constant water circulation, the ZPS PRO IDEAL circulation pump also ensures that even individual, rarely used drinking troughs don't become contaminated. Bacteria multiply rapidly in stagnant water. Furthermore, animals generally prefer to drink water that is at a comfortable temperature rather than water that is too cold. This way, your animals are optimally supplied with fresh drinking water via the frost-proof waterers, even in winter. This keeps them healthy and happy. However, switch the circulation pump to winter mode well before the onset of frost, when temperatures drop below 5 degrees Celsius. This way, the screw-in heating element will automatically start heating when the preset temperature is reached. This prevents unnecessary energy waste on frost-proof drinking troughs. After winter, switch the ZPS PRO IDEAL back to summer mode, and the heating element will cease operation. You can find practical drinking troughs in the Lister247 shop, such as the plastic horse trough with a pressure tongue or the plastic cattle trough with a pressure tongue.The advantages of the ZPS PRO IDEAL circulation pump at a glance:The ready-to-connect circulation pump is delivered fully assembled on a stainless steel base plate.The pump: High-efficiency pump (max. 45 watts), with lower power consumption for the same pumping performance.The heating element: 3 kW (with green indicator light, thermostat, and safety temperature limiter).The control box has a switch for summer and winter operation.In summer mode, the circulation pump switches on automatically every half hour, thus saving considerable energy costs compared to conventional circulation systems (which run continuously) and preventing the pump rotor from seizing. Naturally, the thermostat-controlled heating unit does not operate in summer.In winter mode, the pump runs continuously with the thermostatically controlled heating.Connection cable: 1.50 m (without plug)Pipe length: approx. 250 meters with a 1" pipe diameterAccessories for the circulation system: check valve, air vent, pressure relief valve, and T-fittingTechnical data:Voltage: 230 voltsPump: max. 45 watt high-efficiency pumpHeating element: 3 kW completePipe length: approx. 250 Meters with 1" pipe diameterConnection cable: 1.50 m (without mains plug)Control box: with switch for summer and winter operationSummer operation: daily automatic switch-on (½ hour) of the circulation pumpWinter operation: continuous pump operation and thermostatically controlled heating operation (thermostat-controlled heating unit is not in operation during summer operation)Accessories: check valve, air vent, pressure relief valve and T-piece