Sling

Practical honey extractor for hobby beekeepers and beginners with electric drive. The drum is made of acid-resistant stainless steel. The basket consists of 8 and 6 mm thick stainless steel rods. The transparent design of the lid makes it possible to observe the spinning process without opening it.With the radial centrifuges, more frames can be centrifuged at the same time than with comparable tangential centrifuges and without turning, which saves time! However, caution is advised with viscous honeys and large frames, as comb breakage could occur more easily.Ø: 720mm18 frames Zander, Langstroth, DNM30 frames Dadant ½ (145 or 160mm height)Drive: electric 230VMotor: 12V/150WDrum material thickness: 0.6mmLid: 4mm thick plexiglassPinch tap: stainless steel 6/4″Bridge, legs: powder-coated

Fully automatic honey extractor for beginners and advanced beekeepers with 7 preset automatic programs. The slingshot offers space for 6 frames. Depending on the size of the frames, there are cassettes of different sizes. It offers the possibility to work in both manual and automatic mode. Battery operation (12V) allows honey to be extracted anywhere where there is no access to the 230-volt network. The drum is made of acid-resistant stainless steel. The basket is made of rust-proof, acid-resistant rods and is equipped with cassettes. The cassettes are connected to each other with special guides and springs, which allow them to return to the starting position. The safety lock attached to the lid of the honey extractor stops the extractor from operating if the lid is opened during the extractor. The transparent design makes it possible to observe the spinning process without opening it.: 800mm6 framesDimensions cassettes: 440x250mmDrive: electric ground drivePower supply: 12/230VMotor: 24V/350WDrum material thickness: 0.6mm< li>Lid material thickness: 4mmPinch tap: stainless steel 6/4?Bridge, legs: powder-coatedCassettes: stainless steelDelivery : on pallet

Fully automatic honey extractor for beginners and advanced beekeepers with 7 preset automatic programs. The slingshot offers space for 4 frames. Depending on the size of the frames, there are cassettes of different sizes. It offers the possibility to work in both manual and automatic mode. Battery operation (12V) allows honey to be extracted anywhere where there is no access to the 230-volt network. The drum is made of acid-resistant stainless steel. The basket is made of rust-proof, acid-resistant rods and is equipped with cassettes. The cassettes are connected to each other with special guides and springs, which allow them to return to the starting position. The safety lock attached to the lid of the honey extractor stops the extractor from operating if the lid is opened during the extractor. The transparent design makes it possible to observe the spinning process without opening it.Ø: 720mm4 framesDrive: electric floor drivePower supply: 12/230VMotor: 24V/250WDrum material thickness: 0.6mmLid material thickness: 4mmHoney gate: stainless steel 6/4 ZollBridge, legs: powder-coatedCassettes: stainless steelDelivery: on palletRequired Door width: 750mm

Inexpensive narrow honey extractor with manual drive and plastic squeeze tap. Designed for use in smaller apiaries in the hobby sector. The extractor has space for 3 frames (DNM, Zander, Langstroth). The drum is made of acid-resistant stainless steel. The basket is made of stainless, acid-resistant rods. The transparent design of the lid makes it possible to observe the spinning process without opening it.Ø: 400mm3 frames (DNM, Zander, LS)Drive: manual/hand driveDrum material thickness: 0.6mmPinch tap: plastic 6/4″Bridge, legs: powder-coatedOverall dimensions (L x W x H): 640 x 570 x 1080 mm

Inexpensive honey extractor for hobby beekeepers and beginners with hand drive. The slingshot offers space for 4 frames (DNM, Zander, LS, BW, Dadant). The drum is made of acid-resistant stainless steel. The basket is made of rust-proof, acid-resistant rods. The transparent design of the lid makes it possible to observe the spinning process without opening it.Ø: 600mm4 frames (DNM, Zander, LS, BW, Dadant, EHM)Drive: manual/hand driveCover: transparentDrum material thickness: 0.6 mmDrum base bearing: stainless steel ballSqueeze valve: stainless steel 6/4"Bridge, legs: powder-coated

Inexpensive honey extractor for hobby beekeepers and beginners with hand drive. The slingshot offers space for 4 frames (DNM, Zander, LS, BW, Dadant). The drum is made of acid-resistant stainless steel. The basket is made of rust-proof, acid-resistant rods. Thanks to the ingenious design without a central axis, the frames can be turned in the spinner without having to put them out and back in again. The transparent design of the lid makes it possible to observe the spinning process without opening it.:600mm4 frames (DNM, Zander, LS, BW, Dadant, EHM)Drive: manual/hand driveDrum material thickness: 0.6mmPinch tap: stainless steel 6/4?Bridge, legs: powder-coated< /li>

Practical honey extractor for hobby beekeepers and beginners with an electric drive. The slingshot offers space for 4 frames (DNM, Zander, LS, BW, Dadant). The drum is made of acid-resistant stainless steel. The basket is made of rust-proof, acid-resistant rods. The basket can be easily removed for cleaning. Thanks to the ingenious design without a central axis, the frames can be turned in the spinner without having to put them out and back in again. The transparent design of the lid makes it possible to observe the spinning process without opening it.:600mm4 frames (DNM, Zander, LS, BW, Dadant, EHM) Drive: electric Power supply: 230V Motor: 120W Drum material thickness: 0.6mm Pinch tap: stainless steel 6/4?Bridge, legs: powder coated