--------------------------
Now NEW - BRIXIES Plus Agricultural Building Blocks
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb
€0.00*

Hydraulic motors & accessories

Gear motors

Axial piston engine

Hydraulic motors

Filter
Drive stub 1 3/8 x 6 for RT gearbox
#FA129257
BERMA Drive stub 1 3/8 x 6 for RT gearbox
Sale and shipment by: FAIE Handels GmbH
In order to drive the RT series gearboxes with a drive shaft, a PTO stub is fitted instead of an oil motor. The PTO stub has a profile of 1 3/8 x 6 and, on the gearbox side, a smooth shaft with a diameter of 25 mm and a keyway.

€169.00*
Front bearing for oil engines with SAE-A connection and Ø 25 mm shaft, output shaft Ø 25 mm
#FA126993
Front bearing for oil engines with SAE-A connection and Ø 25 mm shaft, output shaft Ø 25 mm
Sale and shipment by: FAIE Handels GmbH
​Front bearing suitable for all oil motors with a 2-hole SAE-A connection and shaft diameter of 25 mm. These auxiliary bearings are used for higher axial loads on oil motors, e.g. due to a chain drive or V-belt drive. Two tapered roller bearings are installed in the bearing.There is an SAE-A 4-hole flange with a shaft diameter of 25 mm on the output side. The tapered roller bearings are lubricated via a grease nipple on the bearing housing.

€249.00*
Front bearing for oil engines with SAE-A connection and Ø 25 mm shaft, output shaft Ø 32 mm
#FA126994
Front bearing for oil engines with SAE-A connection and Ø 25 mm shaft, output shaft Ø 32 mm
Sale and shipment by: FAIE Handels GmbH
Front bearing suitable for all oil motors with a 2-hole SAE-A connection and shaft diameter of 25 mm. These auxiliary bearings are used for higher axial loads on oil motors, e.g. due to a chain drive or V-belt drive. Two tapered roller bearings are installed in the bearing.There is an SAE-A 4-hole flange with a shaft diameter of 32 mm on the output side. The tapered roller bearings are lubricated via a grease nipple on the bearing housing.

€249.00*
Hydraulic motor MM
#26859
Hydraulic motor MM
Displacement (cm³/rev.): 40 | L (mm): 118,5 | Power max. cont. (kW): 1,8 | Power max. int. (kW): 3,0 | Type: MM40 | max. int. pressure (bar): 110 | max. int. speed (rpm): 625 | max. pressure cont. (bar): 80 | max. speed cont. (rpm): 500 | max. torque cont. (Nm): 41 | max. torque int. (Nm): 57
Sale and shipment by: FAIE Handels GmbH
With side connections R 3/8?, shaft 16 mm, max. inlet pressure 140 bar.

Variants from €239.00*
€279.00*
Hydraulic motor MP
#18397
Hydraulic motor MP
Displacement (cm³/rev.): 79,2 | L (mm): 140 | Power max. cont. (kW): 10,2 | Power max. int. (kW): 12,5 | Type: MP80 | max. int. pressure (bar): 175 | max. int. speed (rpm): 945 | max. oil flow cont. (l/min): 60 | max. oil flow int. (l/min): 70 | max. pressure cont. (bar): 140 | max. speed cont. (rpm): 755 | max. torque cont. (Nm): 151 | max. torque int. (Nm): 195
Sale and shipment by: FAIE Handels GmbH
Connections R 1/2?, shaft 25 mm, plain bearing.

Variants from €249.00*
€249.00*
Hydraulic motor MR
#18424
Hydraulic motor MR
Displacement (cm³/rev.): 199,8 | L (mm): 163,5 | Power max. cont. (kW): 11 | Power max. int. (kW): 13 | Type: MR200 | max. int. pressure (bar): 200 | max. int. speed (rpm): 375 | max. oil flow cont. (l/min): 60 | max. oil flow int. (l/min): 75 | max. pressure cont. (bar): 175 | max. speed cont. (rpm): 300 | max. torque cont. (Nm): 450 | max. torque int. (Nm): 500
Sale and shipment by: FAIE Handels GmbH
Connections R 1/2?, shaft 32 mm, plain bearing.

Variants from €319.00*
€375.00*
Hydraulic motor RL
#47064
Hydraulic motor RL
Displacement (cm³/rev.): 250,1 | L (mm): 187 | Power max. cont. (kW): 10 | Power max. int. (kW): 12 | Type: RL250 | max. int. pressure (bar): 200 | max. int. speed (rpm): 300 | max. oil flow cont. (l/min): 60 | max. oil flow int. (l/min): 75 | max. pressure cont. (bar): 175 | max. speed cont. (rpm): 240 | max. torque cont. (Nm): 540 | max. torque int. (Nm): 610
Sale and shipment by: FAIE Handels GmbH
With side connections R 1/2?, shaft 25 mm, with tapered roller bearings.

Variants from €399.00*
€459.00*
Mounting flange for oil motor series MM
#FA27838
Mounting flange for oil motor series MM
Sale and shipment by: FAIE Handels GmbH
Oval flange for hydraulic motors of the MM series. Delivery includes 3 countersunk screws.

€29.00*
Profile sleeve 1 3/8' x 6 internal teeth
#FA37494
Profile sleeve 1 3/8' x 6 internal teeth
Sale and shipment by: FAIE Handels GmbH
For attaching to oil engines. Bore 25 mm, keyway 8mm, outer 49 mm, length 130 mm.

€49.90*
PTO stub 1 3/8 x 6"
#FA9433
PTO stub 1 3/8 x 6"
Sale and shipment by: FAIE Handels GmbH
For attaching to oil engines. Bore diameter 25 mm, keyway 8 mm.

€24.95*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.