Hydraulics in general

Aluminum oil air cooler in panel construction. Max. operating pressure 26 bar, protection class IP44.Application: hay cranes, stationary small units

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Cross section 2.5 mm, length 3.2 m

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.2 pieces of straight connections

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.1 piece straight and 1 piece 90 connection

Consisting of 2 connecting parts with internal thread and 1 blind cap.2 pieces 90

Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.

Fan motor complete with housing, sealing profiles and fastening material suitable for asa oil cooler type 0176/0177/0256/0257, TT16, TT25By using a fan controller, the maximum charging and discharging current (ripple current) can be kept at the maximum value of 1%.Temperature range from -20 °C to 80 °CScope of delivery: 1 pc. Fan motor complete with housing, 4 pcs. screws with nuts and washers, 4 pcs. Spacers, 2 pcs. sealing profiles

Especially for retrofitting mechanical front loaders with hydraulic actuation of the tools. In conjunction with a EURO quick-change frame, a fully hydraulic front loader can be created in a very short time (see front loader conversion kit Faie No. 70599). With the 895 mm long tilting linkage and the lifting path of 507 mm, a tilt angle of up to 180 can be achieved.The scope of delivery includes 1 hydraulic hose with union nut M18x1.5 / 12L in lengths of 1100 mm and 1300 mm included.Pressure force per cylinder 6927 kg at 180 barTensile force per cylinder 5195 kg at 180 barTilt angle up to 180 Stroke path 507 mm

340 pieces, from 2.90 x 1.78 to 28.17 x 3.53 mm.

408 pieces, 3x2 to 50x3,5 mm, quality 70 shore. In the practical storage box.

425 pieces, 3x1.5 to 30.2x3 mm, quality 70 shore.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminium-Ölluftkühler in Plattenbauweise. Maximaler Betriebsdruck 26 bar, Schutzart IP68.Ölkühler werden bei Dauerbetrieb von hydraulischen Anlagen zur Abkühlung des Hydrauliköls eingesetzt. Vorwiegend werden Ölkühler jedoch auf solchen Anlagen montiert, die nachträglich mit weiteren hydraulischen Verbrauchern ausgerüstet wurden. Bei diesen Umbauarbeiten wird in vielen Fällen der Tankinhalt nicht vergrößert und dadurch erhöht sich der Umlauf und die Temperatur des Öles im Hydrauliksystem. Die optimale Betriebstemperatur einer Hydraulikanlage liegt zwischen 50-60°C. Erhöht sich die Temperatur zu stark, muss die überschüssige Wämemenge über einen ÖL/Luftkühler abgeführt werden.Um die Größe des Ölkühlers festlegen zu können, benötigen wir für die Berechnung einige Daten von Ihnen:- Zahnradpumpe oder Regelpumpe- Fördermenge der Pumpe in L/min- Tankinhalt in L (wenn bekannt)- Öldruck im Hydrauliksystem in bar- Umgebungstemperatur in °C- Öltemperatur der Hydraulikanlage in °C- Anschlussspannung in VWir berechnen gerne für Sie den benötigten Ölkühler und freuen uns auf Ihre Anfrage

Aluminum oil air cooler, max. operating pressure 26 bar, protection class IP 68. World's first flexible mounting and connection system for oil coolers. The hydraulic connection direction can be freely selected for each connection with 3 directions and the flow direction in the cooler can be changed. The oil flow direction can be described as both "~U-flow"~ as well as with "~diagonal flow"~ can be realized without special parts!Delivery without connections.

The GT series oil coolers are a fully assembled cooler package consisting of an oil air cooler, fan control with sensor, connections, vibration dampers and protective housing.The temperature is controlled via an electronic control in conjunction with a temperature sensor. Depending on the oil temperature, this fan control ensures the optimal fan speed and a smooth start-up of the fan. This reduces noise and increases the service life of the fan unit.The protective housing is a stable frame with a metal protective grille in front of the cooling element. The cooler is mounted on the special asa vibration dampers in the protective frame to prevent vibrations.Aluminum oil air cooler, max. operating pressure 26 bar, protection class IP68.

The GT series oil coolers are a fully assembled cooler package consisting of an oil air cooler, fan control with sensor, connections, vibration dampers and protective housing.The temperature is controlled via an electronic control in conjunction with a temperature sensor. Depending on the oil temperature, this fan control ensures the optimal fan speed and a smooth start-up of the fan. This reduces noise and increases the service life of the fan unit.The protective housing is a stable frame with a metal protective grille in front of the cooling element. The cooler is mounted on the special asa vibration dampers in the protective frame to prevent vibrations. Aluminium oil air cooler, max. operating pressure 26 bar, protection class IP68.

70 shore. The length of the round cord is 2 m in the following diameters: 1.78 - 2 - 2.4 - 2.62 - 3 - 3.5 - 4 - 5 - 5.33 - 5.7 - 6 - 7 -8 mm . Incl. cutter knife, roll meter 3 m, glue and cutting gauge.

Protection class IP67, thread G1/2", oil temperature range -20 to +100C. It is not possible to use the temperature sensor without fan control.

44 - 55C, G 1/2"~ without cable.

Switching temperature 50C, +/-5C, thread G1/2"