Mower spare parts

Track board

Track board alone

Upper cutter head

to bird &~ Noot to jet mower

Upper cutter head with button, 04-12A

Upper cutter head, L=400 mm, pin � 18 mm,

Suitable for BUSATIS mower Bidux 1205

Upper cutter head, pin � 16 mm

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Upper cutter head, tenon � 16 mm, suitable for Busatis

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Upper friction plate

Suitable for Steyr T80-180 with cleaning plates.

Upper knife 25 blades for Busatis double knife mower

Upper blade, 25 blades, DME1606AOverall length including blade head: 1940 mmLength of blade back: 1850 mmBlade head 5840.052.01, 345.0690 Projection of blade head beyond blade back: 57 mm Blade head length: 235 mm Blade head pin diameter: 16 mm Blade head orientation when viewed in the direction of travel: leftTotal number of blades: 25, including 5 mushroom blades Position of mushroom blades relative to the blade head 3rd, 8th, 13th, 18th and 23rd bladesBlade spacing (centre to centre): 76 mmOriginal ESM lower blade: 262.5990

Upper knife ball joint bidux left

Connection joint between rocker arm and upper cutter head. Thread M14x1.5, bore 18mm, left

Upper knife ball joint bidux right

Connection joint between rocker arm and upper cutter head. Thread M14x1.5, bore 18mm, right

Upper knife ball joint on the right

Thread M14x1.5, pin hole 16 mm.

Upper knife bidux system 210cm with 30 blades, including 5 blades with knob

Upper knife to double knife bar bidux system with a total number of blades of 30 pieces. 5 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades in the distance from blade center to blade center is 70mm. The knife is delivered complete with the riveted upper cutter head, seen on the left side in the direction of travel.Suitable for Aebi Mähtrac TT33 and Rapid MT200 with double-blade front mower and for Busatis rear and side mower BM 1205.

Upper knife bidux system 240cm with 34 blades, right

Upper knife to double knife bar bidux system with a total number of blades of 34 pieces. 6 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades is 70mm from blade center to blade center. The knife is delivered complete with the riveted upper cutter head. Suitable for Aebi Mhtrac TT33 with double knife front mower and for Busatis rear and side mower BM 1205.

Upper spring

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Vogel & Noot, mower blades for jet mowers

Bottom knife, 27 blades, 5 of which are mushroom blades

Wear plate for cutter head, instead of ESM 363.0350

​Wear plate for ESM cutterhead for mower blade drive via a sliding block with an edge length of 38x38mm. The plate is attached to the inside of the cutterhead with 2 pcs. M6 screws on the inside of the cutterhead. When replacing, both wear plates should always be replaced at the same time. Delivery per piece!