Mower bar replacement parts

​THE lightweight, battery-powered Husqvarna combi set - hedge trimmer and pole pruner in one set!The Husqvarna basic cordless tool 120iTK4 with telescopic shaft, charger and battery AND - HK4 hedge trimmer attachment with 30 cm cutting length  - PK4 pole pruner attachment with 25 cm cutting lengthVery good cutting performance, enormous working height up to over 4 metres, without annoying cable and without direct emissions. Low vibration. The telescopic shaft offers a reach of up to 4 metres and can be quickly and easily adjusted to work at different heights.Easy transport thanks to the divisible shaft.  Depending on the conditions, choose between normal or savE mode to achieve maximum power or maximum runtime. Either way, you will always get a perfect result.The machine switches off automatically after 60 seconds of inactivity. This not only extends the battery life, but also increases the safety of the machine. Husqvarna 120i TK4 - PH4 - PK4 including 1 x BLi 10 battery and 1 x QC 80 charger!Technical data:Sword length 25 cm / 30 cmMotor type:Electric motorSound pressure level:80.6 db(A)Sound power level:97 db(A)Electric motorBattery voltage:36 VBattery: BLi 10 includedCharger: QC 80 includedWeight:4.5 kg

Suitable for ESM universal beams type 30 - 16.

Suitable for Bucher M500, M550, Record

Suitable for type RM58, 158, 110, 111, 111S, 112, 131.

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.

550980E, 2 pieces per knife

Thread M14x1.5, pin 19 mm.

Thread M14x1.5, pin 19 mm.

Suitable for type 116, 316

Suitable for type 116, 316

Suitable for ESM universal beams type 30 - 16.

Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.

Double finger middle cut suitable for Aebi, BCS and Reform

Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.

The bearing housing N78 has an outside diameter of 77mm. The inner diameter is 62mm so that the deep groove ball bearing 6206 (Faie No. 16741) can be mounted.

Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.

Original ESM Carbodux blade, serrated version

Original ESM Carbodux blade with knob, serrated design

Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.

Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe

Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!