Mower spare parts

Blade holder suitable for Fella, Niemeyer

Blade holder suitable for Fella &~ Niemeyer, length 174mm

Blade holder suitable for M�RTL

Suitable for Mrtl disc mowers

Blade holder suitable for M�RTL

for driving mower drum inside

Blade holder suitable for P�ttinger

Blade holder suitable for Pttinger NOVA CAT and NOVA DISC, length 195mm

Blade holder suitable for P�ttinger 434.125

Blade holder suitable for P�ttinger, PZ-Zweegers

Blade holder suitable for Pttinger and PZ-Zweegers

Blade instead of 344.0091, 51x73x2 mm

Original ESM blade. The rivet holes have a countersink on the underside

Blade instead of 344.1331, 51x74x2.5 mm

Original ESM blade 3-hole with oval center hole. The rivet holes have a countersink on the underside.

Blade N336, 80 x 76 x 2 mm

Blade N336 serrated, 80x76x2mm - wide Mrtl blade. This type of blade was installed on the medium-Rasant, high-Rasant and high-Florett mowers.

Blade Phantom

Blade RS7500, 76x80x2 mm

Blade suitable for Claas WM290F

rasspe radura original spare parts tested according to ISO 5718

Blade with knob for bidux double knife mower

Original blade with knob suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

Blade with knob for Busati's double knife mower

Original ESM blade with knob suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260. Made in Germany.

Blade, 5 holes

83x76x2 mm, recessed at the top

Blade, 83x76x2 mm

Blade, 83x76x2 mm recessed at the top, instead of Rapid 257096

bolt

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

Bottom cutter head with button, 04-3A

Bottom cutter head, L=400 mm, pin � 18 mm

Suitable for BUSATIS mower Bidux 1205

Bottom cutter head, pin � 16 mm

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Bottom cutter head, pin � 16 mm, suitable for Busatis

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Bottom knife 150 cm 20 blades, instead of Busatis DME 1504 B, 5470.002.41

​Bottom knife for Busatis BM 321 KW double cutter bar with a total number of 20 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The positions of the blades with knob, starting from the cutterhead, are on the 5th, 10th and 15th blade. The last blade is an end blade that is ground on both sides. A cutter head plate is riveted to the lower cutter head. The pitch of the blades from blade centre to blade centre is 76 mm. The knife is supplied complete with the lower cutter head, on the left-hand side when viewed in the direction of travel. 

Bottom knife 160cm 22 blades suitable for Moty Gigant

​Bottom blade for Busatis double knife bar with a total number of 22 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted-on lower blade head, on the right-hand side when viewed in the direction of travel. Suitable for Moty Gigant motorised mowers with Busatis double blade mower. Overall length with cutterhead: 166 cm Length of cutter back: 166 cm Cutter head on the right in the direction of travel, offset 25 mm inwards Cutterhead length: 207 mm Total number of blades: 22, of which 4 blades with knob Position of the blades with knob starting from the cutter head: 4th, 9th, 14th and 19th blade Blade pitch (blade centre to blade centre): 76mm