Tractor parts

Verwendung: Gruppenschaltung

Version with 4 switching positions ~

with switch lighting when used with order no. 21735

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function

Use: for the powershift HL

Thinner for painting synthetic resin varnishes

Supplied with corrugated sealing ring, gasket and adapter

Complete with connection cable set, 0-4000 rpm, Ø 80 mm, with adapter ring for 100 mm diameter.The signal for RPM measurement is supplied via terminal W from the alternator.10-32V analog LCD tachometer with stepper motor technology, 4000 rpm, white LED illumination, and an orange hour meter.Drilling template with 100.5 mm diameter, IP65 rated on the front.Operating temperature -20°C to +90°C.Programmable via two buttons on the back of the instrument.4-pin Molex Minifit Jr. connector.90 cm connection cable included.EMC: ISO 7637-2 ISO 2575Technical specifications:Rated voltage: 10-32 VDisplay type: analog - digitalWidth: 10 cmOperating temperature: -20° / +85° CScale: 0-4000 RPMBore diameter: 100 mm

82 mm, 2 screws M5, screw spacing 45 mm, base plate metal

Two-chamber light, base plate made of plastic, screw fastening, 2 holes 5mm, hole spacing 45mm, LxWxH: 95x85x55mm

Plastic housing 140 mm, 2 holes for M6 screws, 45 mm hole spacing.

Three-chamber light HELLA, LxWxH: 95x90x54 mm, 2 holes M5, 45 mm hole spacing, suitable for e.g. Case IH, John Deere, Deutz, Fendt, ...

Suitable for Fendt series: Farmer, Farmer 100 / 300, Favorit 500, ~ ~GTADimensions: 158x64 Hole spacing M 5: 45 mm &~ 98 mmwith license plate lighting thanks to replaceable lens insert

LxWxH: 300x61x92 mm, completely wired, with snap fastening/clamped, suitable for e.g. Fiat, Landini, MF, ...

completely wired, LxWxD: 155x80x150/50 mm sloping mounting plate, hole spacing 113 mm, suitable for e.g. Ford, ...

LxWxD: 180x75x70 mm, hole spacing: 50 mm, suitable for e.g. Landini, MF, ...

completely wired, LxWxH: 295x60x60 mm, suitable for e.g. Landini, MF, ... - right/left,with screw fastening M5, hole spacing 205 mm

With reflector, lensclamped, 170x73 mm, hole spacing 70 mm, right/left

With reflector, lensscrewed, 160x68 mm, hole spacing 58 mm, right/leftSuitable for Steyr 80 series, compact series, case JXC, JXV, Quantum

Metal housing, 2 screws M5, screw spacing: 45 mm, LxWxH: 112x56x49mm

Metal base plate, diameter: 78 mm, M5 screws, hole spacing 45 mm, suitable for e.g. Case IH, Claas, Deutz, Holder, Johne Deere, MF, ...

With rear fog light, black plastic housing, 2 pcs. M8 fastening screws, screw spacing 150 mm.LxDxH: 350x75x135 mm.

Metal housing 90 mm, suitable for e.g. old Steyr models, ...