--------------------------
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb

Tools & Machines

Filter
NEU
#FA134151
Tecwerk 7-piece slotted screwdriver set
with multi-component handles featuring anti-slip grips · hexagonal blades made of heat-treated special steel with key guide · matte chrome finish · size guide system

€59.99*
NEU
#FA134098
Stihl BGA 250.0 Blower – without battery
​The powerful professional handheld blower!Maximum power – experience the world’s most powerful handheld blowing performance – consistently throughout the entire battery life.Sustained peak performance: no drop in power as the battery runs low, full power from the first to the last minute.Fatigue-free and energy-saving ergonomics, compact design, low centre of gravity and an angled blow tube for significantly more sustained working, Pleasantly quiet, ideal for use in noise-sensitive areas, splash-proof (to IPX4 standard), even in adverse weather, Smart Connected: Ready for digital fleet management via Smart Connector 2 A.Stihl recommends the AP 300 S battery for 12 to 40 minutes of running time!You’ve never cleared leaves, garden waste and debris more quickly, efficiently and comfortably. Get this powerhouse for your professional daily work!The BGA 250 is part of the STIHL AP System – for uncompromising professional use.

€389.00*
NEU
-8 %
#FA134036
Bit box, long version, 18 pieces. PZ/PH/TX/FL/SW
Practical long bit set with 1/4" drive. 18 pieces. Made of high-quality S2 steel.Bits with color-coded system for easy bit selection. Length 75 mm.18-piece set. Supplied in a shatterproof plastic box.Contents:1 pc. PZ1/PZ2/PZ31 pc. PH1/PH2/PH31 pc. FL4.0/FL6.01 pc. SW3/SW4/SW51 pc. TX10/TX15/TX20/TX25/TX27/TX30/TX40

€29.95* €32.50* (7.85% saved)
NEU
#FA134150
Tecwerk Combination tap set M3-M10 DIN3126, 7-piece
​HSSG · for drilling, tapping, and deburring - self-centering · Taps with 6.3 mm (1/4") hex shank per DIN 3126Contents:1 each of M 3 / 4 / 5 / 6 / 8 / 10 + 1 bit adapter

€65.90*
NEU
#FA134375
Stihl Cordless pressure washer RCA20 set
​A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container.Thanks to the battery operation (included), a mains connection is not required.Technical specifications:Maximum pressure: 24 barWater flow rate: max. 230 L/hWater temperature: max. 40°CWeight: only 1.3 kgRuntime with one battery: approx. 15 minScope of delivery: tool, 4-in-1 nozzle, spray lance extension, spray hose with filter, collapsible water container, cleaning agent spray set, and practical storage bag. Complete set: includes 2x AS2 batteries and AL1 charger.

€229.00*
NEU
#FA134374
Stihl Cordless pressure washer RCA20 Solo
​A very practical cleaning tool for small jobs around the house.This cordless pressure washer is ready to use in moments and, with up to 24 bar of pressure, is surprisingly effective for cleaning vehicles, garden furniture, windows, and much more. Water is supplied via a standard garden hose or, if no water line is available, independently of a water mains connection using a container or the included collapsible water container. Thanks to its battery operation (battery not included), a mains connection is not required.Technical specifications:Maximum pressure: 24 bar, maximum water flow rate: 230 L/h, maximum water temperature: 40°C, weight: only 1.3 kg, runtime with one battery: approx. 15 min.Scope of delivery:` ...

€169.95*
NEU
#FA134368
Tecwerk Drill bit set 1 - 13 m CO tip with cross-grind
​Professional HSS twist drill bits with a special drill tip for precise centering without pre-drilling, even on rounded surfaces – very fast and smooth drilling.Tin-coated tip for extra-long service life and excellent drilling performance in steels up to 1,000 N/mm².25 drill bits with a 0.5 mm pitch and a 3-flat shank to prevent slippage in the chuck (4.0 mm and larger).Supplied in an impact-resistant plastic case.The innovation for effortless, precise, and fast drilling.

€199.90*
NEU
#FA134153
Tecwerk Hacksaw with hardened teeth
Oval steel tube handle · painted · with tension lever and hand guard · hardened and ground planer teeth · for fresh wood

€11.99*
NEU
#FA133561
Milwaukee HM - Circular saw blade 190/30 36 teeth
​Carbide-tipped circular saw blade suitable for many handheld circular saws with a 190/30/1.6 mm cutting edge.36 carbide teeth for clean rip and cross cuts in wood.

€64.90*
NEU
#FA134484
Ruko HSS-Co drill bit set 1 - 10 mm with FLOWSTEP tip
​The revolution for fast and precise drilling in wood, plastic, aluminum, non-ferrous metals, structural steels, and V2A/V4A stainless steel.Thanks to the FLOWSTEP tip, center punching is no longer necessary, even on rounded surfaces (pipes).The drill bit cuts the material itself, making even larger diameters possible without pre-drilling.The break-resistant plastic case contains 19 high-quality HSS-Co5 drill bits from 1.0 to 10.0 mm with a 0.5 mm pitch.All drill bits 3.5 mm and larger feature a triple-flat shank that reliably prevents slippage in the chuck.These drill bits guarantee fast, precise drilling and an extremely long service life, even with hard materials such as tool steels or stainless steels.

€139.95*
NEU
#FA134485
Ruko HSS-Co5 drill bit set, 1-13 mm, with FLOWSTEP tip
​The revolution for fast and precise drilling in wood, plastic, aluminum, non-ferrous metals, structural steels, and V2A/V4A stainless steel.Thanks to the FLOWSTEP tip, center punching is no longer necessary, even on rounded surfaces (pipes).The drill bit cuts the material itself, making even larger diameters possible without pre-drilling.The break-resistant plastic case contains 19 high-quality HSS-Co5 drill bits from 1.0 to 13.0 mm with a 0.5 mm pitch.All drill bits 3.5 mm and larger feature a triple-flat shank that reliably prevents slippage in the chuck.These drill bits guarantee fast, precise drilling and an extremely long service life, even with hard materials such as tool steels or stainless steels.

€239.90*
NEU
#FA134156
Tecwerk Japanese saw/fine-line saw, blade length 240 mm
with 3-sided Japanese-style teeth · long steel back · for precise sawing · for very fine cuts · straight rattan cut

€34.99*
NEU
#FA134152
Tecwerk lath hammer with magnet
Drop-forged, hardened, and tempered · Black-lacquered head · Shaft and tiller polished to a high gloss · Edges chamfered according to specifications · With unbreakable multi-component nylon shaft

€26.99*
NEU
#FA134376
Forestal Makita to Milwaukee Battery Adapter
​Maximum flexibility for your workshop: the Makita-to-Milwaukee battery adapter!This handy adapter allows you to power your existing 18 V Makita cordless tools using standard Milwaukee 18V batteries. This means, for example, that you can continue to use your existing tools when switching brands.Note: The adapter is intended solely for use with the batteries in the tools. For safety reasons, it is not possible to charge the Milwaukee battery using a Makita charger. Does this sound familiar? You want or need to switch your battery system to Milwaukee M18, but your workshop is still full of your trusty, fully functional 18V Makita tools? Buying a whole new set of tools can quickly become very expensive. Here’s the smart solution that’s easy on your wallet and your nerves! With this handy battery adapter, you can bridge the gap between two worlds. It allows you to seamlessly power your existing Makita 18V cordless tools using standard Milwaukee 18V (M18) batteries. Perfect for switching systems: are you currently switching to Milwaukee? Take it easy and continue using your old tools in parallel. Bottom line: get the best of both worlds and put an end to battery chaos. A click that pays off straight away!

€14.95*
NEU
#FA134369
Ruko Step drill bit set 5-30 mm with FLOWSTEP tip
​The innovation for step drill bits!The FLOWSTEP tip ensures precise centering of the drill hole, even on rounded surfaces – no more center punching required.Thanks to FLOWSTEP technology, you get a smooth transition between different drill bit diameters.The 3-flute shank ensures a secure hold in the drill chuck and reliably prevents slippage during fast work or when drilling thicker materials.Point angle 118°, step angle 90°.Contents:Drill bits 5-12 mm (1 mm pitch), 6-20 mm (2 mm pitch), 8-30 mm (2 mm pitch).Supplied in a shatterproof plastic case.

€179.95*
NEU
-39 %
#FA134724
Unior Unior Hercules 940/H2 Black tool trolley
​Very sturdy workshop trolley with a multi-layered beechwood worktop.Thanks to its robust construction, large wheels, and dynamic load capacity of up to 550 kg, it is ideal for use as a mobile workshop.The trolley features seven ball-bearing drawers with full extension, each with a maximum load capacity of 45 kg.It also includes a door with a safety lock. Convenient locking is achieved via a central locking system with a folding key.High-quality, visually appealing matte black finish. The drawers are, of course, compatible with Unior SOS modular inserts.Supplied with a sturdy carrying handle but without the optional spray gun drawer.Technical specifications:Overall dimensions: 1182 x 640 x 955 mm (L x W x H)Weight: 96 kgDrawer dimensions: 5 x 563 x 365 x 70 mm and 2 x 563 x 383 x 150 mm (L x W x H)Wheels: Oil and acid resistant, 2 x 160 mm fixed and 2 x 125 mm swivel casters with brakesProtective mats in drawers included as standard.

€1,198.00* €1,960.00* (38.88% saved)