Lights
LED combination rearlight SBBL 12/24V
Bright and safe for road trafficIt's over, brake and flashing lightThe light is clearly visible even in poor visibility and ensures a safe journey, has a long service life of up to 30,000 hours. It is therefore very low-maintenance and saves you money.The rear light is made of high-quality materials and has a robust construction. It is therefore resistant to shocks and mechanical damage, and is equipped with electrical protection against reverse polarity. This prevents a short circuit.3-function LED lampEuropean approval E9Approval for electromagnetic compatibility EMCLamp construction resistant to shocks and mechanical damageElectrical protection against reverse polarity Technical data:Functions: stop, brake and flashing lightOperating voltage: 12 /24 VProtection class: IP68Approval: E9, EMCMaterial: Plastic (PC)Dimensions: 120 x 90 x 30 mm
Bayonet connection set 5-pin
For Multipoint I, with contact sockets and 2 grommets, including assembly instructions.
Car light bulb box 12V, H7
Contents:1x H7 12V 55 W PX26d1x W5W 12V W2, 1x9.5d1x P21W 12V BA 15s1x R5W 12V BA 15s1x C5W 12V SV 8.5-8 1x P21/5W 12V BAY 15d1x fuse each 10, 15, 30 Amp
Collision protection for Asp�ck lights
Galvanized, 273x131x67mm, for Multipoint I, II, IV, V and various lights
Connection cable
with 7-pin plug and 5-pin bayonet
Connection cable 5.0 m
with 13-pin plug and 5-pin bayonet
Connection cable 5.2 m
with 7-pin plug, 2x 3.0 m DC outlet, 5-pin. bayonet
Connection cable, 5.0 m
with 13-pin plug, 2x 3.0 m DC outlet, 5-pin. bayonet
Connix LED front light
Expand your Connix set with two new front lights! ~Perfect for use with front weights or other front mounted equipment. Simply connect the front lights to the radio transmitter of your existing Connix set can be carried out."PAIRING" code/alignment: 7-pin. Plug in the transmitter, turn on the ignition, press the pairing buttons on the lights at the same time for 5 seconds. press. ~ ~ ~ ~ ~ ~
Connix LED rear light
Brake light, tail light, indicator, license plate light, with magnet (no StVZO approval)Simply connect the tail lights to the radio transmitter of your existing Connix set.TIP: In order to connect the tail light to the existing light set, a code comparison must be carried out "PAIRING" must be carried out in advance."PAIRING" code/alignment: 7-pin. Plug in the transmitter, turn on the ignition, press the pairing buttons on the lights at the same time for 5 seconds. press. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Connix Magnet LED light set, wireless
With 4 functions: brake light, tail light, indicator, license plate lightwireless, magnetic, rechargeableChange between machines and vehicles in seconds without toolsdurable, developed for agricultureConsisting of: right tail light, tail light left, 7-pin Plug, transmitter/transmitterCAN bus compatible, battery, charging cable, EMC, ECE10, RoHS, IP65, -20C/+50C, 12V(no StVZO approval)
Connix Plus LED light set
magnetic, wireless, rechargeable, with monitoring display/sensorIndicator with neon light effect, modern design with clear and bright lightWith 6 lighting functions: tail light, indicator, brake light, license plate light, rear fog light and triangle reflectorThe display sensor for 12V socket is wirelessly connected to the radio light and provides information about the function and battery charge level of the lights while driving.Simply plug the display sensor into the vehicle's 12 V socket. An additional comfort that also provides additional security.The ConniX Plus is bright, simple, unique and equipped with intelligent technology. It is the first choice for wireless lighting solutionsSwitch between different vehicles and machines in seconds. Consisting of: rear light right, rear light left, 7-pin. Plug, transmitter/transmitter, display sensor, battery charging cable, 12V, up to 10 hours battery life, ECE R10, RoHS, IP65, -20C/+50C, transmission max. 20m, (not StVZO approved )
DC connector Asp�ck 3-piece.
For connecting two ribbon cables?
Flashing light at Deutz
70x70 mm, 2 holes for fastening, hole spacing 45 mm, suitable for e.g. Deutz, ...
Flashing position light
For mounting at the front, base plate made of plastic, snap fastening, 2 holes M5, 45 mm hole spacing.LxWxH: 95x90x54 mm
Flashing position light
82 mm, 2 screws M5, screw spacing 45 mm, base plate metal.
Flexipoint 1 red/white, DC
12V, DC connection with 0.5 m cable, WxHxD: 44x66x28mm, incl. DC connector
Flexipoint red/white, nozzle
12V, connection: grommet, WxHxD: 44x66x28mm
Front indicator position light for Case IH, Deutz, Fiat, Ford, John Deere, MF
LxWxH: 120x80x56 mm, hole spacing 58 mm, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ...right/left
Front indicator position light for Case IH, Deutz, Fiat, Ford, John Deere, MF
LxWxH: 120x80x135 mm, 22 slanted mounting plate, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ... right/left
Front indicator position light for Case IH, John Deere, Fendt, MF, New Holland
LxWxH: 85x85x50 mm, M4 screws, hole spacing 45 mm, suitable for e.g. Case IH, John Deere, Fendt, MF, New Holland, ...right/left
Front indicator position light for MF
suitable for MF, LxWxH: 128x68x48mm, ~Fastening: 2 screws M6, hole spacing: 45mm ?Design: left/right
Galvanized lighting beams
Completely wired, connection cable with 7-pin plug and socket, with taillight, brake light, indicator light, license plate light, 2 triangular reflectors, sheet metal thickness 2mm, carrier height: 210mm
Glass base lamp, 10 pieces
12V 1.2W, socket W2x4.6d
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
