Promotions

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

DL chisel hammer for medium chiseling work and light demolition work. Piston stroke 50 mm, stroke rate 3600 rpm, air consumption approx. 250 L/min, complete incl. 1 flat and 1 pointed chisel and 1 wide flat chisel. The impact energy is 10 joules.

Air consumption approx. 250 L/min., cutting performance in steel approx. 1.6 mm, weight only 0.6 kg, including saw blades.

​Robust hose reel with automatic rewind and locking mechanism for easy operation.Sturdy steel frame for heavy-duty use. Mounts to the floor, ceiling, or wall using the two large guide rollers.Equipped with a high-quality 30 m PU mesh hose with a 9.5 mm inner diameter and a 20 bar operating pressure.1/4" male thread connection compatible with standard DL couplings (e.g., part no. 7378).Complete with a 1-meter connection cable and quick-connect fitting.

High-performance two-cylinder units made of gray cast iron for a long service life and low operating noise. Large fan impeller and a cooling air deflector on the cylinder for optimal compressor cooling Aftercooler with cooling fins ensures a low tank inlet temperature, resulting in less moisture in the compressed air Sturdy metal belt guard Filter pressure regulator with pressure gauge “Made in Germany” for regulated compressed air that is free of condensate, dirt, and oil Ten-year warranty against rust-through on powder-coated compressed air tanks Includes a high-quality composite safety coupling and a high-quality CONDOR pressure switch Sturdy steerable chassis with parking brake, combined with large, puncture-proof PU wheels. Technical Specifications: Intake capacity: approx. 390 L/min Filling capacity: approx. 290 L/min (6 bar) Maximum pressure: 10 bar Motor: 2.20 kW/3.0 PS, 400 volts Tank capacity: 50

Mobile piston compressor with belt driveTwo-cylinder high-performance units made of gray cast iron for a long service lifeLarge fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressorQuality electric motor with high tightening torqueElectric motor equipped with motor protection switchAftercooler with cooling fins ensures a low container inlet temperature and thus less moisture in the compressed airStable belt grid protection made of metalStarting capacitor and starting relief valve ensure easy starting on 230 volt models400 volt models as standard with phase inverter for easy manual reversal of the direction of rotationCompressed air tank equipped with safety valve, tank pressure gauge and condensate drain valveInclusive of all safety devicesCompletely ready for connectionFilter pressure regulator with a pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for container pressureTen-year guarantee against rust through on powder-coated compressed air tanksIncludes high-quality composite safety coupling and high-quality CONDOR pressure switchFlexible armored hose line with heat protection for a long service life without vibration breakage< li>Ergonomic handle, rubber handle and transport handle on the compressed air tank for comfortable transportStable steering chassis with parking brake in conjunction with large, puncture-proof wheels for comfortable transportThanks to the two-stage compression 2-cylinder -High-performance unit with very low speed, a particularly quiet and low-vibration operation is achievedThis ensures a longer service life due to less wear In addition with an intercooler for the aftercooler Compressor system : HOS Suction capacity approx.: 650l/minFilling capacity approx.: 520l/min Explanation of filling capacity at: 6 bar working pressureNumber of cylinders: 2 Number of compression stages: 2Compressor speed: 950min Compressed air tankMaximum pressure: 10bar Tank capacity: 100l

Cast iron compressor with 2 cylinders and aftercooler, suction capacity 320 L/min, speed 1420 rpm, required. Motor power 1.8 kW. Complete with filter and fan wheel 250x13 mm. Oil filling quantity 0.5 L.

​Highly stable and robust plastic bucket with a sturdy carrying handle.Color: olive green. Liter scale inside.Compatible with bucket holders.Dimensions:Outer diameter: 33 cmInner diameter: 29 cmHeight: 25 cmIdeal as a construction bucket, even for heavy-duty work!

for punching test badgesgalvanized

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are connected to the tank. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 45 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R3/8?Screw-in thread T, T2: R1/2? HR=Raise locked, SW=Middle position - floating position, S=Lowering The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? HR=Raise locked, 0=Middle position, S=Lowering.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T1, T2: R3/4? H=Raise, 0=Middle position, S=Lowering, SW-R=Floating position lockedThe switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? H=Raise, 0=Middle position, SR=Lowering locked.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? H=Raise, 0=Middle position, SR=Lowering lockedThe switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? H=Raise, 0=Middle position, S=Lowering.The switching positions listed depend on the respective model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW-SR: H=Raise, 0=Middle position, SR=Lowering locked2. Double-acting control slide DW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4?

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Single-acting control slide EW: H=Raise, 0=Middle position, S=Lower3. Single-acting control spool EW: H=lifting, 0=middle position, S=loweringStandard version of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 bar max. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4?The switching positions listed depend on the respective model of the control valve. 1. Double-acting control slide DW: H=lifting, 0=middle position, S=lowering2. Single-acting control slide EW: H=Raise, 0=Middle position, S=Lower3. Single-acting control slide EW: H=lifting, 0=middle position, S=lowering

Versatile cookie cutter set of 4 - ideal for baking cookies, cookies or fondant decorations. The shapes are made of stainless metal, are easy to clean and ensure clean contours. Perfect for baking fun with children or creative kitchen projects. Set of 4:1 gingerbread man approx. 6 x 4.5 x 2.5 cm, 1 boot 6 x 3.5 x 2.5 cm, 1 Christmas tree 6 x 5.5 x 2.5 cm, 1 star 6.5 x 6 x 2.5 cm

Tine material 25x8.

4 rows

Improves electrical conductivity. Best used on copper-colored contact points; always apply a thin layer to prevent short circuits!It optimizes current flow directly at the mechanical connection points by smoothing out microscopic irregularities in the metal, reducing contact resistance, and reliably preventing corrosion in humid environments.Ideal for use in the Dampfmeister when replacing the heating coil.

Robust circular saw ~Delivered without battery and charger. ~Faie No. Battery and charger starter set: 124169Technical data:Idle speed: 5000/minMax. Cutting depth 90: 66mmMax. Cutting depth 45: 48mmDiameter saw blade: 190mmBore diameter: 30mmWeight with battery: 4 kg

With brushless motor, member of the Power X-Change family. Simple, tool-free adjustment (cutting depth, angle of inclination). With a large handle bar for fatigue-free work, optimal lighting thanks to integrated LEDs, with a high-quality saw table made of aluminum. Thanks to the spindle lock, it's easier &~ quick blade change (blades with 20 &~ 30mm inner can be used). Including parallel stop for precise cuts, cutting depth 65mm (90) or 45mm (45). Saw blade 190x20mm, delivered loose, without battery and charger.

​Powerful drilling with low vibrationsSafe hammer thanks to AUTOSTOP™ technologyFIXTEC™ quick-change tool system for various applicationsThe fastest rotary hammer in its class, resulting in increased productivityPowerful hammer mechanism delivers 2.5 joules of impact energy with low 12.9 m/s² vibrationsDrills up to 125 ⌀ 10 x 50 mm holes with one M18™ HIGH OUTPUT™ 5.5 Ah battery chargeAUTOSTOP™ switches the tool off to protect the user in dangerous situationsFIXTEC™ system for tool-free chuck change between SDS-Plus and 13 mm metal chuckAll-metal gear housing - optimum fit of the gears for increased tool life4 operating modes: rotary hammering, hammering only, drilling only and Variolock for maximum versatilityCompatible with M18 FCDDEXL or M18 FDDEXL dust extractorsThe FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components -100% system-compatible with the MILWAUKEE®-M18™ product rangeSupplied without battery and charger (FAIE no. 129044)Technical data:Designation: Model variant: M18 FHX-0XSupplied in HD boxWeight: 3.4 kgWeight with battery: 4.4 kgIdle speed: 0 - 1330 rpmMax. Drilling diameter in concrete: 26 mmMax. Drilling diameter in wood: 28 mmMax. Drill diameter in steel: 13 mmMax. Impact speed: 0 - 4800 [min_1]Impact energy: 2.5 EPTA JVoltage: 18 V