Vehicle construction
The hand pump allows you to fill a tire even against the air pressure. However, the back pressure should not be higher than 2.0 bar. With high-pressure tires, the air must be released up to this limit.
With 2 screw holes 6 mm.
with straight valve TR15
9 pieces, 7 patches, 1 tube of SVS solution 5 g, 1 rough paper. For bicycles, wheelbarrows, rotary haymakers,...
12 pieces, with 10 patches, 1 tube of SVS solution 10 g, 1 rough sheet. For cars, trailers,...
26 pieces, with 17 patches, 1 tube of SVS solution 25 g, 3 rough plates, 3 short valve inserts, for agricultural/construction machinery.
With plate hole spacing 51 mm, galvanized, 35x33 mm
Without clamp holder.
Without clamp holder.
Without clamp holder.
for brake type 20-2425/1 200x50mmconsisting of (for 1 axle):4 brake shoes, 4 tension springs, 2 conical compression springs
Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt.
Tensile load 250kg, with swiveling ring, galvanized,
Permissible tensile load 1135 kg, mounting bracket 90 x 30 mm, square bore 11 mm, galvanized, pack of 2For securely attaching tie-down straps to trailersRustproof, corrosion-resistant designEasy assembly and disassembly without weldingSuitable for trailers, motorhomes, vans, boats, trucks, and for home and yard useWith D-ring anchorMaterial: Galvanized steel
39 PCS high power LEDs, single, double flash, 160 flashes/min.Magnet, suction cup attachment, operating temperature: -30 to +50COn/off switch for selecting the flash image, battery capacity display 4 hours operating time with 4 hours charging timeCharging cable 1200mm for cigarette lighterApproved up to 80 km/hHeight: 116mm, diameter: 142mmRadio suppressed EMC, ECE, R65, IP66
The high-quality LED work light is equipped with highly efficient CREE LEDs and a die-cast aluminum housing. The FAIE LED headlight offers excellent light parameters and very good heat dissipation. The headlight is characterized by low power consumption - only 34W. Compact dimensions allow the headlights to be installed in hard-to-reach places. The housing and other lamp parts are made of high-quality materials that are very resistant to both high and low temperatures, mechanical damage and vibration.Technical data: ~universal supply voltage: 12V - 55V DC ~Power consumption: 12V/24V/48V = 2.8A/1.4A/0.7A ~Rated power: 34W ~Color temperature: 6,000 Kelvin ~Measured Light output - min 2,800 lumens (real measured) ~Lamp with aluminum housing, 9x CREE LEDs of the latest generation ~Electromagnetic compatibility - EMC certified ~Protection rating: IP68 (dust-proof and waterproof)  ~Shock resistance - IK ~Operating temperature: -40C to +50C ~Connection cable: 1500 mm ~Wide beam 60 ~Special lens made of polycarbonate< br> ~reverse polarity protection ~fixed polarization: GROUND = white wire~ (+) = black wire
suitable for Steyr 80 series SK2 cabinSteyr 900, 9000 series, Lindner GeoTracFendt 200, 300, 500, GT, Vario10-30V, 30x2W, 3280Lumen,Working temperature -45C/+55C, IP69KEMC, die-cast aluminum housingSize: 183x102x61mm, cable length 1000mm
Support load 300 kg, height 400 mm, stroke 220 mm
Linseal is not an adhesive, but a water-soluble liquid that contains rubber particles. The particles wedge themselves purely mechanically in the split rubber and, depending on the tire structure, seal punctures of up to 15 mm object diameter and also air loss between the tire and rim. Linseal is filled into the tire or tube via the valve stem.Properties:- reusable- applicable down to -25C- non-toxic- does not stick- remains liquid - washable with waterArea of application:Agriculture in general, industrial machinery, construction machinery, garden tools, wheelbarrows,... all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after.
Seals punctures of up to 15 mm object diameter and also air loss between tire and rim. Area of application: all pneumatic tires except vehicles over 80 km/h. Tires with tubes must be filled as a preventive measure. Tubeless tires can be filled before or after, contents 25 liter canister
Content: 25 l (€8.48 / 1 l)
Ideal for securing loads in the vehicle quickly and easily. (e.g. boot)No more luggage flying around in the trunkSimple and inexpensiveSystem can be loaded up to max. 760 kgReinforced edge cord Ø 10 mm for secure strappingSewn-on fastening straps 100 and 150 cmMaterial: polypropyleneScope of delivery: 1 net 100x120 cm (mesh size 25x25 mm), 2 snap hooks, 2 straps.One end of the strap is attached to the PES tension straps of the net using clamp locks, the other end of the strap is attached to the anchor points of the vehicle using pointed hooks
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.


