Products

Wire nozzle MB25 / MB36, length 28mm, outside 8mm, M6, 1.0mm

for suction filters and return filters for pipe installation. Suitable for items 2 and 3. Connection thread R1/8"~ rear.

The basic and introductory work for farmers, forest owners and everyone who has to do with the forest.It describes all the questions that arise with forest management, such as location, form of management, tree species and their composition, rejuvenation, thinning and felling as well as shaping and Selling the wood.

German product, straight, length 275 mm.

55mm x 5m, Grade 983, marked according to UN ECE R104 for fixed bodies.

Electric black/white joystick switches with 2 or 4 functions. max. 5A, cable length 3 m

Electric black/white joystick switches with 2 or 4 functions. max. 5A, cable length 3 m

Allows continuous climate control using single-phase fan control based on temperature.Stepless TRIAC control for single-phase fans (max. 6.3 A)0-10V- Output signal for controlling: one or two fan control devices, valve flaps, heating systemsRelay outputs for controlling: alarms, heating systems, a second fanIntegrated voltage and current protection< /li>Reading out the ventilation statusWith bridging switchIncl. two temperature sensors for the inside and outside temperature Equipped with a relay output for alarm function Advantages: Even fan operation, low acquisition costs, easy installation and simple Operation, can be used in new and existing ventilation systems.Settings: Setpoint, minimum and maximum value, bandwidth. Continuously variable fan speed control (max. 6.3 A), independently programmable 0-10V output signal for air inlets or additional controllers. Integrated voltage and current protection, ventilation status reading, 100% bypass switch, including temperature sensor.Technical data: ~Controller type Triac controller, 230 V single-phase, fan Output voltage 70-230 V, fan Output current 0.5-6.3 A, IP54 plastic housing, inputs: temperature sensor, outputs: ventilation controller (6.3 A), 0-10 volts for air inlets or additional controllers. LxWxH: 205 x 235 x 120 mm

Allows continuous climate control using single-phase fan control based on temperature. - Stepless TRIAC control for single-phase fans (max. 10 A)- 0-10 V output signal for control of: One or two fan control devices, valve flaps, heating systems- Relay outputs for controlling: alarms, heating systems, a second fan- Integrated voltage and current protection- Reading out the ventilation status- With bridging switch- Incl. two temperature sensors for the inside and outside temperature- Equipped with a relay output for alarm function Advantages: Even fan operation, low acquisition costs, lighter Installation and easy operation, can be used in new and existing ventilation systems.Settings: Setpoint, minimum and maximum value, bandwidth. Continuously variable fan speed control (max. 6.3 A), independently programmable 0-10V output signal for air inlets or additional controllers. Integrated voltage and current protection, ventilation status reading, 100% bypass switch, including temperature sensor.Technical data: Controller type triac controller, 230 V single-phase, fan output voltage 70-230 V, fan output current max 10 A, IP54 plastic housing, inputs: temperature sensor, outputs: ventilation controller (10 A), 0-10 volts for air inlets or additional controllers. LxWxH: 270 x 225 x 120 mm

Delivery: 1 pair 

For test milking (without seal) for 25/30 L cans, 205mm

for punching test badgesgalvanized

For top link catch hooks

For lower link catch hooks

Control spring for injection pump for Steyr T80, T84, T86Item no. 40

This main control unit is used in the tractor to control and regulate the hitch. With the control valve, attachments attached to the hoist can be raised and lowered continuously. The position control keeps a position preselected on the control lever (height of the attachment) constant. The traction control allows optimal use of the tractor's performance. Depending on the type of application, the control valve can also be used for mixed control of position and tension control. The control system constantly corrects disturbances automatically, making driving the tractor much easier.The control unit is equipped with a lowering throttle, with which the lowering speed of the hoist can be adjusted.There is an additional connection for the return on the front of the switch cap .Not an original replacement part!

This main control unit is used in the tractor to control and regulate the hitch. With the control valve, attachments attached to the hoist can be raised and lowered continuously. The position control keeps a position (height of the attachment) preselected on the control lever constant. The traction control allows optimal use of the tractor's performance. Depending on the type of application, the control valve can also be used for mixed control of position and tension control. The control system constantly corrects disturbances automatically, making tractor driving much easier. The valve is very extensively equipped with additional connections for R and P, as well as continuous adjustment of P.The control unit is equipped with a lowering throttle, with which the lowering speed of the hoist can be adjusted.A sealing plug is included in the scope of delivery must be used in the valve if there are only 2 hydraulic connections on the hydraulic flange surface. The non-existent connection must be closed with the plug on the control valve. The sealing plug is held in its position by being flanged to the power lift.There is an additional connection for the return line at the front of the switch cap.Not an original replacement part!

​Hydraulic control valve in monobloc design with electromagnetic 12 volt operation and manual emergency operation via hand lever. Standard radio valve for FAIE crane cable winches. The solenoid valve is double-acting and has a connection for pressure transfer,The connections to the working cylinders are locked in the zero position - no floating position in the O position!Technical data:12 V 3 AFlow rate max. 50 l/min.Operating pressure: max. 175 barConnections: 1/2 inch female thread inlet/outlet and consumer, 1/2 inch male thread for pressure transferControl valve with additional manual emergency operation.

​Electromagnetic actuation with spring return to the centre position = floating position. The centre position is designed with an unpressurised circulation and connections A, B are both open into the return flow. Pressure relief valve on connection P (pump). Negative overlap of the gate valves.Standard version of the valves in parallel connection.Version: DE50Max. flow rate: 50 litres/minOperating pressure: 250 barMax. pressure: 300 barPressure relief valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8″Screw-in thread P, P2, T, T2: R1/2″H=lifting, 0=centre position = SW = floating position, S=lowering. 

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Version: DE50Flow max.: 50L/min Operating pressure: 250 barmax. Pressure: 300 barRelief pressure valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8?Screw-in thread P, P2, T, T2: R1/2?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Version: DE50Flow max.: 50L/min Operating pressure: 250 barmax. Pressure: 300 barRelief pressure valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8?Screw-in thread P, P2, T, T2: R1/2?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Version: DE50Flow max.: 50L/min Operating pressure: 250 barmax. Pressure: 300 barRelief pressure valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8?Screw-in thread P, P2, T, T2: R1/2?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.

Electromagnetic actuation with spring return as standard. The middle position is designed with a pressureless circulation and ports A, B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection. Version: DE50Flow max.: 50L/min Operating pressure: 250 barmax. Pressure: 300 barRelief pressure valve set: 100 bar, adjustable from 100-250 barScrew-in thread A, B: R3/8?Screw-in thread P, P2, T, T2: R1/2?H=Raise, 0=Middle position, S=Lower.The switching positions listed depend on the respective model of the control valve.