Products
High-quality dirty water pump with aqua sensor for use in narrow shafts or pits. High quality seal and oil chamber for long service life. Transports dirty water up to 35mm grain diameter. Output: max. 20,000L/h, pressure max. 0.9 bar/9 meter delivery height, motor: 750 watts/230V. Connection via 6/4? female thread or with 5/4, 6/4 or 2? hose.
Compact and robust dirty water pump with oil-filled submersible motor with 0.55 kW/230 volts. Flow rate max. 230 L/min, delivery height max. 8 m, connection 5/4?IG. Dimensions: Height only 410 mm, diameter 245 mm. Thanks to the special level controller and compact design, it is ideal for dirty water shafts where space is limited, e.g. cleaning milking parlors, seepage shafts in driving silos, etc. Switching range of the float switch min. 10 cm, max. 20 cm.
High-quality submersible pump with a stainless steel housing and a power output of 750 watts / 230 volts.Pumps up to 11,400 L/min and can handle particles up to 30 mm in size. Maximum delivery head: 7.5 m (0.75 bar).Equipped with a float switch and a universal hose adapter.A practical flood control kit for pumping out basements, pools, construction pits, etc.Complete with a 15 m C-shaped flat hose, matching C-coupling for the pump, transport basket (which doubles as a pump housing), and pre-filter.
For tough use, e.g. for floods, seepage shafts or flooded construction pits, secure stability, long mileage. 1300 W, flow rate max. 23,000 l/h, delivery height max. 10 m, immersion depth 5 m, foreign bodies up to 40 mm, connection cable 10 m, float switch, pressure connection G 2" IT, universal connection nozzle 2" AG, 90 angle, double Mechanical seal, cast iron pump wheel.
The Einhell dirty water pump GE-DP 7935 NA ECO with aqua sensor works with Eco-Power and delivers a delivery rate of 19,000 liters per hour at 790 watts, with a maximum delivery height of nine meters. The maximum immersion depth is seven meters. The pump is designed for foreign bodies with a diameter of up to 35 millimeters. This makes the dirty water pump suitable for powerful pumping out of ponds, construction pits, basement rooms or for rainwater use. Thanks to the Aquasensor technology, the pump works with patented sensor settings at three automatic starting heights or can be used in continuous operation. Due to the integrated aqua sensor, the pump has a slim design and can also be used in narrow shafts. A high-quality mechanical seal ensures a long service life. The robust housing is made of impact-resistant plastic with a stainless steel outer skin. The hose connection on the top of the pump is easily accessible. The equipment includes the ergonomic carrying handle, a ten meter power cable and the cable winder as well as an integrated hanging loop. Technical data:Mains connection 230VPower 790WFlow capacity max. 19000l /hDelivery height max 9mImmersion depth max 7mWater temperature max 35CGrain size max 35mmHose connection 6/4" AGPower cable 10m H07RN-F
Newly developed submersible pump for clear and dirty water up to grain size 30 mm. Max. delivery rate 7500 l/h, delivery height max. 5 m, motor 450 watts 230 volts. Pressure connection 5/4?IG, complete with float switch and hose connection.
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for many sweepers, such as Saphir and Tuchel. The honeycomb Beeline design is used without intermediate rings. The offset of the disc brushes corresponds to an intermediate ring of 50 mm in width.
Suitable for Tuchel, Stramayr, with driving pin.
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Whether in agriculture, municipal use or on construction sites: when it comes to cleanliness and efficiency, our brush rings are the first choice for your sweeper. Trust in original equipment manufacturer quality that can easily handle even the toughest dirt.Thanks to optimised bristle density and special arrangements, such as the proven Wave-Line wave shape, our disc brushes guarantee streak-free sweeping results and ideal dirt transport.The PP (polypropylene) bristles are the all-rounder for standard cleaning, leaves and up to medium soiling.The high-quality bristle material ensures low wear and a long service life. This significantly reduces your maintenance costs thanks to a long service life!Depending on their dimensions, our brush rings are compatible with all common brush drives and sweeper models and can be changed quickly thanks to precise manufacturing.
Disc brushes consist of an inner brush ring and plastic bristles that are attached to the ring in a radial pattern. The plastic brush ring has a drive pin so that the rotational movement of the axle can be transferred to the disc brushes. The bristles are made of smooth or corrugated polypropylene. Suitable for Tuchel, Straßmayr, with drive pin.The colour of the bristles may differ from the colour listed depending on the availability of the bristle material.
Can be used as a side broom on all common sweepers. Sweeping 600 mm, plate 350 mm, center hole 120 mm, hole circle 1 160 mm, hole circle 2 220 mm, 3 holes each with a diameter of 10.5 mm
Braided wire, for deburring and cleaning weld seamsquiet and low-vibration runningbore 22.2 mm diameter
Can be used as a side brush on all standard sweepers. Sweeping Ø 600 mm, disc Ø 350 mm, centring hole 120 mm, bolt circle 1 Ø 160 mm, bolt circle 2 Ø 220 mm, 3 holes each with a diameter of 10.5 mm. A sheet metal cover is screwed onto the disc brush so that the sweeping bristles cannot be pushed out of the wooden body with a smaller drive disc.
Can be used as a side brush on all standard sweepers. Sweeping Ø 600 mm, disc Ø 350 mm, centring hole 120 mm, bolt circle 1 Ø 160 mm, bolt circle 2 Ø 220 mm, 3 holes each with a diameter of 10.5 mm. A sheet metal cover is screwed onto the disc brush so that the sweeping bristles cannot be pushed out of the wooden body with a smaller drive disc.
Disc for diesel tap for Steyr: T80, T84, T86, T180 partlyItem no. 9
Disc for jump starter head for Steyr: T80, T84, T86, T180/aItem no. 100
Suitable for all Roll-Blitz
Drain slide for our uninsulated transport containersThe drain slide is the perfect addition to our fish transport containers with sluice (32x29 cm and 30x40 cm) and stainless steel fittings.It is simply hooked onto the sturdy stainless steel bracket above the sluice. After opening the sluice, the fish slide safely and stress-free down the chute directly into the water.Advantages at a glance:Compatible with 32x29 cm and 30x40 cm sluicesEquipped with durable, stainless steel fittingsQuick and easy installation by hooking inGentle fish transfer without risk of injury