Products
Open double ring wrench with a wrench size of 17 mm. Particularly suitable for hard-to-reach places, suitable for most diesel engines. Chrome-plated version, 12-point.
For hanging in the running tube with individual screw options for attaching e.g. Gates.With adjustable flange pendulum - therefore universally applicable, galvanized, including high-quality ball bearings for clean running.Flange thickness 10mm
This double rolltop cooling display with rectangular design and 480 × 355 × 480 mm is designed for chilled presentation of food in buffet and catering environments. The system has a capacity of 2 and is made of ABS, stainless steel and PET. A transparent PET rolltop lid and gel-filled cooling elements support temperature control and presentation. Benefits & Functions • Double capacity 2 – separate presentation – parallel use • 90° rolltop lid – access without lifting – hygienic handling • Gel cooling elements – temperature stabilization – extended freshness Frequently Asked Questions What is the capacity? The capacity is 2. Which materials are used? The product is made of ABS, stainless steel and PET. How does the lid open? The rolltop lid opens up to 90 degrees.
Double sieve made entirely of stainless steel. Thanks to the adjustable frame, which can be extended up to 40cm, it can be combined with many honey pots.It consists of two sieves, of which the coarser one has a mesh size of 1mm and the finer one has a mesh size of 0.7mm.So both can be used Larger as well as smaller wax particles or other contaminants can be filtered out. ~Frame extendable to 40cmMesh size at the top: 1mmMesh size at the bottom: 0.7mmDiameter: 23cm
Large double sieve made entirely of stainless steel. It can be combined with many honey pots thanks to the adjustable frame that can be extended up to 47 cm.It consists of two interlocking sieves, the coarser of which has a mesh size of 2 mm and the finer a mesh size of 0.4 mm.This means that both larger and smaller wax particles or other impurities can be filtered out. Frame extendable to 47 cmTop mesh size: 2 mmMesh size at the bottom: 0.4 mmØ 31.5 cmPractical stand included in the scope of delivery!
Padded shoulder strap for comfortable and back-friendly weight distribution, quick release hook with large base.
Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Extremely close bar spacing (20mm) reduces the risk of the slurry system becoming blocked because little feed is lost. For slatted floors, mounting above the feeding trough is recommended.Hot-dip galvanized, double version, 480 x 530 x 440 mm, for partition 35-40 mm.
Keep your pigs in a species-appropriate manner and reduce the frequency of tail and ear biting by giving them roughage! Particularly suitable for administering raw fiber material in pig stables. Galvanized, for attaching to the box or side wall up to a maximum width of 43 mm. Due to the small width of 40 mm, only little material is lost and therefore the risk of blockages in the slurry system is reduced. Bar thickness: 6 mm~ L x W x H: 62.5 x 51 x 48 cm.
ideal for transporting heavy objects such as windows, glass doors or mirrors 120 mm , up to 60 kg
Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.BG2 with spacing 90mm (running pipe center-center), height 95mm, width 150mm
Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.
Particularly suitable for hydraulic cylinders that need to hold large loads in position. Max. pressure 350 bar, control ratio 4:1.
To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.
Partial ratio 1:1. The incoming oil flow is divided into 2 equal parts regardless of the operating pressure. If the flow direction changes, the partial flows are added back together. Eg for silo tongs with 2 cylinders. If the silo tongs are filled unevenly, the cylinders are subjected to different stresses. This can be prevented with the flow divider.
Bolt-øD=20.5 mm, connection P=G 3/8 inch, G=28 mm, F=40 mm, compressive force 2261 kg, tensile force 1378 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=20.5 mm, cross bushing ØD=20.5 mmCylinder Ø C = 50 mmPiston base Ø K = 50 mm
Bolt-øD=25.5 mm, connection P=G 3/8 inch, G=43 mm, F=45 mm, compressive force 5089 kg, tensile force 3810 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=25.5 mm, cross bushing ØD=25.5 mmCylinder Ø C = 70 mmPiston base Ø K = 70 mm
Bolt-øD=30.5 mm, connection P=G 3/8 inch, G=34 mm, F=55 mm, compressive force 6927 kg, tensile force 4665 kg at 180 bar, nominal pressure 250 bar.Cross bore in base ØD=30.5 mm, cross bushing ØD=30.5 mmCylinder Ø C = 80 mmPiston base Ø K = 80 mm
The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar
The valve is used for overpressure or overload protection in 2 pressure lines. It can be used both as a shock valve and as a pressure relief valve for continuous operation. The valve is an ideal protection against sudden pressure surges and enables the setting of different pressures at two inlets of the hydraulic system. The shock valve is used to protect hydraulic motors, synchronised cylinders and systems with the same stroke volume. For example, the protection of snow plough cylinders that are constantly exposed to external forces and loads during operation. Shock valves are positioned as close as possible to the consumer to be protected. Adjustable pressure range: 40 - 210 bar
Width 50 mm, length 10 m.
Content: 10 m (€0.48 / 1 m)
Heat-resistant silicone scraper with stainless steel handle. The plastic button in the handle ensures a secure hold. Dishwasher safe. Dimensions 26.5x5.5 cm
