Vehicle construction
Our offer
This brake light switch for the Steyr Plus series and Lindner operates as a normally closed contact and breaks the circuit when actuated. Hole spacing 23 mm, 2x flat plug connections. Advantages & Features • Normally closed function – the circuit is interrupted when the switch is actuated • 23 mm hole spacing – suitable for specific mounting positions • 2x flat plug connections – simple electrical connection Frequently Asked Questions Which vehicles is the switch suitable for? The brake light switch is designed for vehicles in the Steyr Plus series and Lindner. How does the switch work? In the neutral position, the circuit is open. When the switch is pressed, the circuit is closed. Translated with DeepL.com (free version)
With trailer ball pin 50mm and trailer towing hitch, anti-twist, A: 22mm, B: 661mm, C: 19mm, D: 775 mm (no StvO approval)With the Cat 1 field rail triangle you can attach attachments to your tractor /Attach tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower links and the upper links. Lower link bolts: 22mm, upper link bolts: 19mmThe field rail triangle is delivered including bolts and linchpins.TOP price-performance ratio
Consisting of: ~2 pieces of lower link balls with catch profile, inner 28.5 mm, outer 56 mm2 pieces of lower link balls, inner 28.5 mm, outer 56 mm1 piece top link ball, inner 25.4 mm, outer 50 mm
With trailer ball pin 50mm and trailer towing hitch, anti-twist, field rail 932mm, 9 holes 28mm, not homologated (no StvO approval)With the field rail triangle Cat 2 you can attach attachments to your tractor/tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower link and the upper link.Lower link bolt: 28mm, upper link bolt: 25mmThe field rail triangle is delivered including bolts and linch pins.TOP price-performance ratio< /li>
Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt.
39 PCS high power LEDs, single, double flash, 160 flashes/min.Magnet, suction cup attachment, operating temperature: -30 to +50COn/off switch for selecting the flash image, battery capacity display 4 hours operating time with 4 hours charging timeCharging cable 1200mm for cigarette lighterApproved up to 80 km/hHeight: 116mm, diameter: 142mmRadio suppressed EMC, ECE, R65, IP66
The high-quality LED work light is equipped with highly efficient CREE LEDs and a die-cast aluminum housing. The FAIE LED headlight offers excellent light parameters and very good heat dissipation. The headlight is characterized by low power consumption - only 34W. Compact dimensions allow the headlights to be installed in hard-to-reach places. The housing and other lamp parts are made of high-quality materials that are very resistant to both high and low temperatures, mechanical damage and vibration.Technical data: ~universal supply voltage: 12V - 55V DC ~Power consumption: 12V/24V/48V = 2.8A/1.4A/0.7A ~Rated power: 34W ~Color temperature: 6,000 Kelvin ~Measured Light output - min 2,800 lumens (real measured) ~Lamp with aluminum housing, 9x CREE LEDs of the latest generation ~Electromagnetic compatibility - EMC certified ~Protection rating: IP68 (dust-proof and waterproof) ~Shock resistance - IK ~Operating temperature: -40C to +50C ~Connection cable: 1500 mm ~Wide beam 60 ~Special lens made of polycarbonate< br> ~reverse polarity protection ~fixed polarization: GROUND = white wire~ (+) = black wire
suitable for Steyr 80 series SK2 cabinSteyr 900, 9000 series, Lindner GeoTracFendt 200, 300, 500, GT, Vario10-30V, 30x2W, 3280Lumen,Working temperature -45C/+55C, IP69KEMC, die-cast aluminum housingSize: 183x102x61mm, cable length 1000mm
60 mm, length 2000 mm, 40-120C, suitable for Steyr T80-290. Screw-in thread M10x1 on the sensor
For coupling front and rear implements, reinforced version.
All Products
Rubber retaining strap, 195 mm
Metal-polymer plain bearing CSB20 to ISO 3547 (DIN 1494) with embossed lubrication pockets in a low-maintenance design. The plain bearing bushes are equipped with a low-maintenance sliding material for use in mixed friction applications with grease or oil lubrication. This means that the plain bearings must be lubricated with grease or oil. A hole is provided on the plain bearing for this purpose. The embossed lubrication pockets can optimally absorb the lubricant (grease, oil).The plain bearing bushes are characterised by high wear resistance, low friction and good damping properties. The bushings are also insensitive to shocks. The low friction coefficients, good wear resistance and reliable load capacity of the bearing ensure suitable use in rotating and oscillating movements.The range of applications for plain bearing bushes extends to agricultural equipment, construction machinery, industrial trucks, lifting equipment, hydraulic cylinders and motors as well as steering knuckle bearings, steering gears, power steering and pedal bearings.
Up to 74 kW, price per piece.
Up to 92 kW, price per piece.
OEM quality, secure locking, easy unlocking, L: 80mm
OEM quality, secure locking, easy unlocking, L:85mm
OEM quality, secure locking, easy unlocking, L: 110mm
For tractors up to 73.5 kW (100 HP). The pawl is operated from above, so no annoying levers. The lower link catch hooks are equipped with a new safety lock. The quick couplers have a lockable opening position. Scope of delivery: 2 lower link catch hooks, 2 catch bushes, 2 catch balls with spacer ring, spacer spring and actuation chain.
Scope of delivery: 2 lower link catch hooks, 2 ball catch profiles, 2 catch balls, 1 operating cable, installation and operating instructions. The lower link catch hooks made of high-strength forged steel are equipped with a locked open position. The lock can only be released using the opening lever. Automatic unlocking is impossible.
up to 73.5 kW/100HP, L:110mmloose, per piece
Versatile - holding force per magnet approx. 20 kg, magnet diameter 75 mm
12 V, H4 with marker light. Also suitable for Steyr series 80, 900 and Lindner from '99. Asymmetrical light, glass frame made of black plastic, reflector and lens glued together, lens adjustment angle +/- 4, installation opening: 145x90 mm.
Original headlights with wiring and bulbs. Outer 160 mm, screw M18x1.5, not "~E"~ checked.
60 mm, length 2000 mm, 40-120C, suitable for Steyr T80-290. Screw-in thread M10x1 on the sensor
Cable cross section 7 x1.5 mm with 2 plugs, 7-pin, 12 V, length: 3.50 m.
Protective cap for Minipoint light
(with lamps)
Complete with curved mirror glass 210x138 mm black plastic, clamp with turntable for 10 mm rod, can be used for trucks, off-road vehicles, agricultural and construction machinery. (E-approved).
complete with rod 18 mm and fastening, black plastic housing, size: 230x175mm, rod length including bracket: 300mm
Complete with curved mirror glass, also partially suitable for Steyr 900, black plastic housing, with clamp holder for rod 14-20 mm, size 318x186 mm
Unser Produktleiter
Franz Neuhofer
Franz has been with FAIE since 1988 and is THE professional when it comes to vehicle construction.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.