House, yard & garden
All Products
robust, hot-dip galvanized design
High-quality double nipple made of V4A stainless steel
For hanging in the running tube with individual screw options for attaching e.g. Gates.With adjustable flange pendulum - therefore universally applicable, galvanized, including high-quality ball bearings for clean running.Flange thickness 10mm
Padded shoulder strap for comfortable and back-friendly weight distribution, quick release hook with large base.
Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.BG2 with spacing 90mm (running pipe center-center), height 95mm, width 150mm
Ideal fastening of two rail systems running one behind the other. Easily attached to the masonry, galvanized.
Width 50 mm, length 10 m.
Content: 10 m (€0.48 / 1 m)
Equipment:70 pieces of dowels 6 mm80 pieces of dowels 8 mm10 pieces of dowels 10 mm 1 each stone drill: 6.8 and 10 mm
Special submersible pump for pumping dirty water, backwater, groundwater, or construction site water.Thanks to optimized motor cooling, operation is possible even at low water levels (drip operation).However, dry running should be avoided.The pump features a high-quality 1850W/230V motor with a 100% duty cycle, making it suitable for continuous operation.This professional pump can handle particles up to 10mm in size, has a delivery head of up to 7m, and a maximum flow rate of 28,000L/h.A durable housing made of high-quality stainless steel and a float switch are standard features.Hose connection: 1 1/2" female thread.
Output 50 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, connection 3/4" male thread, self-priming. Not suitable for aggressive liquids and diesel .
Output 45 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, hose connection 15 mm suitable for 1/2"~ Hose, self-priming.
Self-priming pump suitable for every drill.Power 25 L/min., suction height 4 m, pressure 5 bar, speed maximum 2600 rpm, temperature suitability max. 50C, clamping shaft 6 mm, hose connection 15 mm suitable for 1 /2?hose
Practical drill pump made of stainless steel, food-safe and self-priming (after filling) thanks to impeller technology.Ideal for:Wine< li>MustSalt and fresh waterMilkOilsas well as liquids whose viscosity does not exceed 30 centistokes or more than 4 degrees Engler. ~However, the liquid should contain no or only very small solids. ~Technical data: ~ Power: 1500l / hour Hose connection: 3/4" ~Speed max: 2850 rpm ~< li>Delivery height max.: 24 m ~Town weight: 1.5 kg
Your start to perfect watering of raised beds, gardens, greenhouses and hedges.When it comes to watering plants, drip hose irrigation is the most effective method that also saves a lot of water. The aquadrip® starter set contains everything you need to get started. It is easy to install and expandable.Compared to conventional systems, aquadrip® can do more: thanks to a pressure compensation mechanism, the water outlet rate remains the same with varying water pressure, thus ensuring uniform irrigation of the rows of plants. In addition, the technology offers protection against dirt ingress, which means that aquadrip® can be laid both above and below ground.Technical data: Hose length 60 m, hose Ø 16 mm, wall thickness 0.90 mm, dripper spacing 33 cm, flow rate approx. 2 l/h. Pressure range 0.8 - 4.0 bar.Set consisting of:Drip hose 60 m, pressure reducer with filter screen, tap connection and hose adapter, 5 L-distributors, 5 hose couplings, 5 T-distributors, 5 end pieces, 20 mounting anchorsTranslated with DeepL.com (free version)
This driver's cab with windshield wiper fits the electric cargo tricycle Thunder and Thunder PRO. ~With electric windshield wipers, this accessory offers more comfort and safety in bad weather.Delivered without assembly.
Made of metal (zinc die-cast), for diesel, heating oil EL/L, petroleum but also fuels such as petrol/E85 (danger class A I-II), radiator antifreeze (undiluted) and thin mineral oils, reciprocating piston pump.Telescopic suction pipe, Suction pipe length 490-925 mm, delivery rate: 0.25 l/stroke, barrel screw connection M 64 x 4/50.80 mm (2") suitable for standard 60/200 L barrels. ~Complete with hose set 1500 mm long DN 19 and metal outlet piece, electrically conductive, ATEX compliant.Simple and cost-effective hand pump for refueling machines with diesel, gasoline, etc.
M 16 mm. With ammonia-resistant ball bearings, ideal for stables.
130 cm and rail clamp, 4 prongs, LxW 32x24 cm.
With spring nozzle, 4 prongs, LxW32x24 cm.
4 prongs
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.


