Drill Bits & Milling Cutters

#FA129098

Milwaukee Step drill 6-35 mm, 2 mm and 3 mm steps

Sale and shipment by: FAIE Handels GmbH

Step drills are ideal for drilling in the following materials: - Alloyed and unalloyed sheet metal, profiles and pipes. - Copper, brass and aluminum. - EElectricians: Drilling panels and switch cabinets for cable installations. - SHK: Access holes in pipes and lines. - Metalworkers: DrillingStep drills save costs compared to conventional drills: - one drill for different diameters. - the optimum solution for enlargingMILWAUKEE® advantages:Center punching, drilling and deburring in one stepRAPID STRIKE™ drill tip for easier centering.Special drill point and special step geometry enable chatter-free drilling. Reduced risk of jamming at high speeds.Optimized 2-spiral geometry with sharpened edges for up to 2x faster drilling progress.Made of special steel with black oxide coating for up to 4x longer service life.Optimized for use with cordless tools.Laser marking of the diameters.Each step is relief-ground for optimum drill feed and automatic deburring.Shank with 3 clamping surfaces for a secure hold in the drill chuck and optimum power transmission.

€119.95*

#76532

Adjustable center drill

Size (mm): 15-45

Sale and shipment by: FAIE Handels GmbH

Two interchangeable knives, for softwood.

€34.95*

#FA124988

Auger bit set 6 pcs 460mm

Sale and shipment by: FAIE Handels GmbH

Auger drill set 6 pieces, in diameters 10, 12, 14, 16, 18, 20 mm, ~Drill head with self-tightening thread tip enables quick drilling with little effort, ~for precise drilling in Wooden beams and for roof truss work, in a blow mold case.Total length 460 mmWorking length 380 mmCV steelPrecision ground Hexagonal shank Surface ground Colour black

€49.95*

#FA37522

Tecwerk Countersink DIN 335 C 90 degrees nominal D. 25 mm HSS Z.3

Sale and shipment by: FAIE Handels GmbH

HSS DIN 335 C 3 cutting edges Countersink angle 90 Cylindrical shank for countersinking and deburring holes in steel, cast iron, non-ferrous metals the three cutting edges produce a chatter-free cutHSS: for steel, cast iron , non-ferrous metals Further technical properties Feed in steel up to 500 N: 0.2mm/rev

€26.50*

#FA120126

HM MÜLLNER Countersink set 6 pieces. HSS metal cassette

Sale and shipment by: FAIE Handels GmbH

Made of HSS steel, with sizes 6.3 / 8.3 / 10.4 / 12.4 / 16.5 &~ 20.5mm. Practical universal set.

€42.50*

#20370

Cutting in countersinks

Size (mm): 15,0

Sale and shipment by: FAIE Handels GmbH

90 cylindrical shaft

€19.95*

#FA113779

Ruko Hole saw set HSS-Bi metal 8 pieces

Sale and shipment by: FAIE Handels GmbH

Universal hole saws in sizes 22/29/35/44/51 and 68mm. Suitable for wood, plastic, metal and non-ferrous metals. Drilling depth up to 38mm. Complete with matching holder and plastic cassette.

€59.90*

#FA56984

Hole saw set, 9 pieces. HSS-BI metal

Sale and shipment by: FAIE Handels GmbH

For installation and locksmith work, variable tooth pitch ensures longer service life, even cutting. Contents/diameter of the hole saws: 22/29/35/44/57/68 mm.Suitable for metals, plastics and all types of chipboard.

€69.90*

#FA26892

HSS step drill set, 3 pieces.

Sale and shipment by: FAIE Handels GmbH

€29.90*

#14637

Stubai Krauskopf countersink

Size (mm): 16,0

Sale and shipment by: FAIE Handels GmbH

For wooden shaft 6x30 mm.

€11.90*

#94870

Tecwerk SDS - plus hammer drill

Length (mm): 160 | Ø (mm): 12

Sale and shipment by: FAIE Handels GmbH

High-quality professional design in aggressive tip and helical design.Areas of application: concrete, sand-lime brick, masonry (for all concrete and stone applications)certified by the Wall Drill Testing Association (PGM) according to the requirements of the German Institute for Construction Technology (DIBt).

Variants from €4.49*

€5.79*

#FA53120

Metabo SDS-max chisel set 2 pieces

Sale and shipment by: FAIE Handels GmbH

Chisel duo consisting of pointed chisel and flat chiselFor general chiseling and breaking work on masonry, concrete and loose stone.Consisting of: 1 x pointed chisel L = 360 mm, 1 x flat chisel 25 x 360 mm,

€27.90*

#FA53042

Metabo SDS-Plus chisel set 2 pieces

Sale and shipment by: FAIE Handels GmbH

Chisel duo consisting of pointed chisel and flat chiselFor general chiseling and breaking work on masonry, concrete and loose rock.Contents: 1 x pointed chisel L = 200 mm, 1 x flat chisel 20 x 200 mm

€17.99*

#124400

Milwaukee SDS-Plus hammer drill MX4

Working length mm: 115 | Ø: 8

Sale and shipment by: FAIE Handels GmbH

High-quality concrete drill with SDS-Plus holder.Thanks to 4-cutting technology, very good drilling performance even in reinforced concrete and a significantly longer service life than many commercially available 2-cutters.

Variants from €9.99*

€12.50*

#2825

Short cylindrical twist drill

Piece: 1 | Size (mm): 12,0

Sale and shipment by: FAIE Handels GmbH

According to DIN 338, HSS quality (high-performance high-speed steel).

Variants from €3.20*

€8.95*

#FA58682

Tecwerk Step drill drilling range 4-30 mm HSS spiral grooved number of cutting edges 2 number of steps 14

Sale and shipment by: FAIE Handels GmbH

HSS spiral grooved with cross ground 2 cutting edges Precision design Point angle 118 Step angle 90 Shaft with 3 clamping surfaces Other technical properties Point angle: 118 Step angle: 90 Groove: spiral grooved Shaft length: 24mm : 4/ 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 24/ 26/ 28/ 30mm Number of cutting edges: 2 Cutting material: HSS

€57.90*

#FA73150

Step drill set, 3 pieces.

Sale and shipment by: FAIE Handels GmbH

HSS, straight shank, 4 - 32 mm, with 2 cutting edges and drill point.

€59.99*

#2985

Twist drill conical MK II

Size (mm): 23,0

Sale and shipment by: FAIE Handels GmbH

According to DIN 345, HSS quality (high-performance high-speed steel)

Variants from €17.95*

€29.95*

#39093

Twist drill HSS cylindrical

Size (mm): 15,5

Sale and shipment by: FAIE Handels GmbH

With offset shaft 13 mm

Variants from €9.99*

€12.99*

#FA97553

HM MÜLLNER Universal drill set 5 pieces

Sale and shipment by: FAIE Handels GmbH

Universal drill with centering tip made of chrome vanadium steel in a practical wooden cassette. Suitable for use with hard, soft and veneer wood.Contents:15mm, shaft 6mm20mm, shaft 8mm25mm, shaft 8mm30mm, shaft 8mm35mm , shaft 8mm

€24.95*

22 %

#FA132443

Milwaukee Universal hole saw set, 10 pieces

Sale and shipment by: FAIE Handels GmbH

HM - Hole saw set in very high quality.Designed for universal use in brick, aerated concrete, chipboard, softwood, MDF, plastic, and coated boards/panels.Not suitable for concrete, granite, or natural stone.Contents:Adapter with pilot drill including spare drill bit,Hex key, and hole saws in sizes 35, 44, 51, 57, 67, and 76 mm.Cutting depth: 60 mm.Supplied in a sturdy plastic case.

€139.95* €179.90* (22.21% saved)

#FA26911

Universal milling drill set, 6 pieces.

Sale and shipment by: FAIE Handels GmbH

One for all. For drilling in wood, metal, plastic and mixed materials. With milling function for expanding holes, processing curves, etc. Metal cassette with 1 milling drill bit each: 3x60mm, 4x67mm, 5x80mm, 6x85mm, 6.5x85mm, 8x95mm.

€15.99*

#13658

PROMAT Wood twist drill with center point

Length (mm): 60 | Ø: 3

Sale and shipment by: FAIE Handels GmbH

C70 steel, CV steel Cylindrical shaft with continuous back milling, centering point and pre-cutters Other technical properties Material: CV steel Total length: 61mm

€3.20*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.