Workshop supplies

Completely galvanized, with automatic braking mechanism, awarded with the official test mark of the professional associations. Easy to operate with little effort thanks to appropriately selected gears. Without rope and hooks.

Equipment details: Lid can be easily closed using screw locks12-volt fluorescent tube with 230-volt power supply and external switchSuitable for various blasting materials, e.g. quartz, glass spheres , plastic ball, etc.Ideal for cleaning, derusting or removing paint from all kinds of metal parts, e.g. engine parts, fittings, signs, housings, rims, hingesHigh-quality latex work gloves are secure connected to the housingOptimal visibility and occupational safety when processing workpieces due to the viewing window with glued-on protective filmDust-free work thanks to all-round seals on the lid and door framesStable storage grid enables Placing workpieces in the interior of the cabinWith drain opening for changing the blasting materialSuction pipe for the blasting material attached to the bottom of the collecting containerWith compressed air connection on the outside li>Glass bead blasting media, corundum blasting media, silicon carbide, plastic blasting media, etc. can be used  ~Technical data: Volume work cabin : 90lAir consumption: 200-350l/minWorking pressure: 2.8 - 8.0barCompressed air connection: 3/8"< li>Blast media core size: 0.42 - 0.125Inside dimensions: 580 x 480 x 300mmOutside dimensions: 590 x 489 x 490mmWeight: 17 .25kgInlet pressure max.: 8.6barMax. Weight on the support grid: 10kgMax. Weight of blasting material: 12kgHand hole diameter: 155mm

1 pair, universal, for sandblasting

Container capacity 1 L.

Powerful sandblasting gun with sand recovery thanks to a fine brush attachment, minimal dust and dirt development. Ideal for processing smaller areas/parts. Working pressure 6-8 bar, air consumption approx. 500 L/min. Suitable for steel granules from 0.2 - 0.8mm.

A jack with a small initial and large end height of 90-315 mm, capacity max. 1000 kg.

Mobile scissor lift table with a maximum load capacity of 500 kg. Robust steel construction, large castors (127 mm) with brakes on the swivel castors. Easy to operate using foot (lifting) and hand lever (lowering).Table dimensions: 855x500x50 mm, max. lifting height: 900 mm, min. table height: 340 mm, weight: approx. 90 kg.

​Attachment point for load securing, 180° swivelling, Load-bearing capacity at 0° and 90° (safety factor: 4)Supplied without screws - just use 10.9!.

Endless, with stable standard hose, with 7x safety.

High strength straight shackle with screw bolts

High-strength, curved shackle with screw bolts

450x340x70 mm, painted, with removable PVC inserts.

​Robust jack with 3 T lifting force. Very clean and sturdy workmanship: 29.5 kg net weight. Stroke: 125 mm min. to max. 455 mm. Length of pump rod: 990 mm Quick lift due to double lifting cylinder. Easy lowering via handle bar.

Robust car jack with a load capacity of 2 tonnes. Minimum height 140 mm, maximum height 820 mm, weight approx. 60 kg, dimensions 1200x430x200 mm.

Practical, mechanical maneuvering aid, ideal even in confined spaces. The foot pedal is used to quickly and easily raise the tire or tires of the vehicle to be lifted, after which it can be moved in any direction without any problems. Load capacity 680kg per trolley, working width 320-640mm.

G 10, 8 mm, 3 meters working length with two shortening hooks, ring and load hook, with test sticker, PAS chain (with H stamp) according to EN 818-4, load capacity: at 45 - 3550 kg, at 60 - 2500 kg.

G 10, 8 mm, 3 meters working length with four shortening hooks, ring and load hook, with test sticker, PAS chain (with H stamp) according to EN 818-4, load capacity: at 45 - 5300 kg, at 60 - 3750 kg.

mm,4 meters usable length with two shortenings, ring and load hook, with test sticker, load capacity: at 45 - 2800 kg, at 60 - 2000 kg.

8 mm,3 meters usable length, with ring and load hook, with test sticker, load capacity: at 45 - 2800 kg, at 60 - 2000 kg.

High-strength slotted ring for attaching to the chain, self-tightening, with secured pin, for mounting on the chain link. The extra large opening prevents the chain from jamming.

​Shelving unit equipped with 36 x storage bins (230/200 x 150 x 130 mm, L x W x H) in blue and 63 x storage bins (160/140 x 100 x 75 mm, L x W x H) in red.This practical small parts shelving unit keeps your workshop organized and provides quick access to screws, nails, and other small parts.Complete dimensions: 2010 x 1010 x 400 mm (H x W x D).Delivered disassembled.

Chrome-plated special brake line wrench with reinforced hexagonal openings and double offset. Length 175 mm, wrench sizes 10 mm and 11 mm.

Granular, free-flowing and scatterable natural product made from highly porous volcanic rock for binding oils, emulsions, varnishes, alkalis and acids. Particularly non-slip even on oily surfaces. Bulk density 320-350 g/l. Chemically neutral, non-toxic, 1 kg binds up to 1.14 L of oil. Grain size 0.3 - 1.5 mm. Contents 20 L (approx. 7 kg), binds up to 8 L.

The spring compressor set with plastic protective inserts is ideal for assembling and dismantling the McPherson springs on the front and rear axles. A spacer is available for springs that taper in one direction. This means that small and large penholders can be used together. The spacer causes an offset of 30 mm. The plastic protective inserts prevent the spring coating from being accidentally scratched, thus reducing the risk of rust and the spring breaking again. The different pairs of spring holders with a diameter of 60 mm - 21.2 cm enable use on many types of vehicles such as BMW, Toyota, Ford, Opel, VW, Audi, Saab, Nissan, Honda, Subaru, Volvo, Mitsubishi /strong> etc. The spring compressor has a maximum clamping force of 1500 kg, a working distance of 30 cm and is not suitable for impact wrench operation. for quick and professional removal and installation of spring struts< /li>suitable for most McPherson struts with conical and cylindrical springs