Products
Dried yeast for honey wines Enovini Honey 10g.It has increased tolerance to high concentrations of sugar and alcohol.It is characterized by low production of volatile acids, sulphites and acetaldehyde.Method of use:Yeast does not require preliminary propagation. The contents of the package should be dissolved in 100 ml of boiled and cooled to 35°C water. Add culture medium with vitamin B1 in the amount of 4.5-11 g/ 10-25 L of mash. To lower the pH, it is recommended to add acidity regulator in the amount of 18-46 g per 10-25 L of honey mash.To increase the acidity of the mash, it is recommended to add acidity regulator at the rate of 18-46 g per 10-25 L of honey mash. Optimum acidity at the start of fermentation: 4-4.5 g/L.
Ground HSS twist drills with high cutting performance and long service life. Contents: yes10 pieces 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5 and 8mm as well as 5 pieces each 8.5/ 9/ 9.5/ and 10mm
Robust design with user-friendly rubber handle.
Professional SDS-Plus 4-cutter drill bit for hard or reinforced concrete.Contents: 5/6/6 x 115 mm, 6/6/8/8/8/10/12 x 165 mm in a PACKOUT-compatible cartridge.
Professional HSS twist drill bits with a special drill tip for precise centering without pre-drilling, even on rounded surfaces – very fast and smooth drilling.Tin-coated tip for extra-long service life and excellent drilling performance in steels up to 1,000 N/mm².25 drill bits with a 0.5 mm pitch and a 3-flat shank to prevent slippage in the chuck (4.0 mm and larger).Supplied in an impact-resistant plastic case.The innovation for effortless, precise, and fast drilling.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.19-piece set with drill bits from 1.0 to 10.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treatable steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure hold in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.25-piece set with drill bits from 1.0 to 13.0 mm in 0.5 mm increments.
Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean results.6-piece set, containing one drill bit each in 2, 3, 4, 5, 6, and 8 mm sizes.
Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.
High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.
High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch
Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.
High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.
High-quality HSS drill bits from 1.0-13mm with a pitch of 0.5mm for universal use in machining alloyed and unalloyed steel.
Industrial HSS-Cobalt twist drill for machining alloyed and unalloyed steel as well as rust- and acid-resistant steels. Increasing in 0.5mm increments from 1.0 to 13.0mm. In metal cassette
Terrax drill cassette with rolled HSS twist drills in 0.5mm increments from 1.00 - 10.00mm. Stored in a sturdy metal cassette.
HSS Co drill, ground, cylindrical with 135 cross ground, bronze surface in a practical metal cassette. Suitable for drilling in steel, stainless steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm tensile strength. Contents: 1-10 x 0.5 mm
Practical range of drill bits, equipped with drill bits in HSS-G quality. Ground design, cylindrical with 135 cross grinding and bright surface. Ideal for drilling in steel and cast steel, alloyed and unalloyed, gray cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver, graphite, non-ferrous metals and plastics.Delivered in a robust metal cassette.in 0.5mm increments< /li>
High-quality twist drills in 0.5mm increments from 1.0mm - 13.0mm increasing. Stored in a sturdy sheet steel cassette.
Roll-rolled HSS twist drills 4241 in a practical metal cassette. Contents: 10 pieces each 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 and 8 mm. 5 pieces each 8.5 / 9 / 9.5 and 10 mm.
SDS-Plus drill with high-quality carbide drill tip and dynamic, chisel-shaped drill head.Large-volume S-spiral geometry for fast drilling material transport.Good drilling performance with good service life. For use in concrete, masonry, natural stone, Contents: 5, 6, 8, 10mm, each 160mm long
Output 50 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, connection 3/4" male thread, self-priming. Not suitable for aggressive liquids and diesel .
Output 45 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, hose connection 15 mm suitable for 1/2"~ Hose, self-priming.