Products

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum flow 150 l/min, max. operating pressure 26 bar, protection class IP55.Delivered without connections and mounting base.Application: hay cranes, stationary small units

Compact, rope-running fall arrest deviceThe ASAP is an essential component of your fall protection system. During normal use whilst moving along the rope, the device moves automatically without requiring manual intervention. In the event of a fall or an uncontrolled descent (> 2 m/s), the device locks onto the rope and arrests you. Choose the length of the fall arrest device to suit your needs, allowing you to work comfortably at varying distances from the rope.Specifications • Rope compatibility: 10 to 13 mm• Certification(s): CE EN 12841 type A, CE EN 353-2, ANSI Z359.15, GB/T 24537, XF 494 : FZL-Z-Q10/13• CE EN 12841 Type A when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS fall arrestor, a CE EN 1891 Type A rope of 10 to 13 mm and an OK TRIACT-LOCK carabiner• CE EN 353-2 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an AXIS rope 11 mm with two sewn-in end connections and an OK TRIACT-LOCK carabiner• ANSI Z359.15 when used with an ASAP’SORBER 20/40 or ASAP’SORBER AXESS energy absorber, an 11 mm BEAM rope with two sewn-in end fittings and a Bm’D TRIACT-LOCK carabiner• Weight: 190 g• Material: aluminium, stainless steel, polyamide

Ash Bucket with Shovel This practical ash bucket allows you to remove ash quickly and cleanly.It is ideal for cleaning fireplaces, grills, stoves, or fire pits. The matching shovel is included.Thanks to the integrated holder, it can be attached directly to the bucket.This way, it is always within easy reach and can be stored in a space-saving manner. The bucket is made of robust, galvanized steel.The shovel handle is made of wood and is comfortable to hold. Dimensions: W x D x H: 35.4 x 33.1 x 34.5 cm Ideal for fireplaces, grills, and fire pits Includes practical ash shovel Holder for easy storage Robust and durable design Material: 99% galvanized steel Steel, 1% Schimaholz ```

Suitable for Faie item no. 35269 and 35270.

This high-quality handle made of sustainably produced ash wood is 140 cm long and is compatible with all multi-star attachments and is characterized by high stability. The open-pored, natural water-based paint absorbs sweat and always ensures optimal grip. Whether for soil cultivation or cleaning work on the terrace - this handle can be used multifunctionally with just one click to replace the attachment.

Made from Austrian ash, tough and elastic, high strength, ergonomically perfectly shaped.

Suitable for the manure fork order no. 74151. Made of solid ash. The stem is curved and blunt. Diameter 36 mm, length 135 cm.

Practical special vacuum cleaner with 18L metal box and powerful 800 watt motor. Ideal for vacuuming ash from tiled stoves, table stoves, etc. Quick and easy to use as no second vacuum cleaner is required.

With stainless steel tension maturing.

ASPEN BIO chain oil is a high-quality, environmentally friendly chain lubricant, especially suitable for use in chainsaws.Features:Made exclusively from vegetable oils and vegetable additives.< li>does not attack the ecosystem, contains the diversity of organisms in the forest.no groundwater pollution, sprayed oil breaks down completely within 21 days in conjunction with soil flora and oxygen. Low chain and rail wear thanks to lubrication-improving additives.In use for over 7 years with the best experience.Economical consumption due to high adhesion.Universal in summer and Can be used in winter.If stored in a dry place, it will last for at least 1 year from the bottling date. It meets the stricter test conditions of the new generation of organic chain oils from the KWF in Groumstadt from May 1993, as well as the requirements after December 31, 1994.The ASPEN organic chain oil also has the environmental label RAL-UZ 48 Blue Angel because it is quickly biodegradable.

Very economical consumption thanks to special adhesive additive and extremely low chain and rail wear due to lubrication-improving additives, also excellent lubrication at cold temperatures and longer standing times.5 liters.

High-quality submersible pump for suctioning clean water up to 2mm water level. Float switch with ON position for eliminating residual water. Housing made of stainless steel, impeller made of special plastic. Motor 370W / 230 volts, delivery rate max. 150 L/min, delivery height max. 7 meters. 5/4?IG connection on the top of the pump.

​Compact cordless garden shears for clean and precise cuts - set with battery and chargerThe Husqvarna Aspire® PS30X-P4A is a handy and powerful cordless garden shear for precise work in the garden.Ideal for cutting shrubs, perennials, or thinner branches. You can use it as a handheld tool or combine it with the Aspire® extension pole to easily reach higher areas.The blades respond instantly to the trigger, giving you complete control over the cut at all times.The brushless motor ensures high efficiency, a long service life, and minimal maintenance.An integrated quick start guide on the device explains the most important functions at a glance.The digital display keeps you informed of the battery level.The convenient hanging loop makes space-saving storage easy.Technical specifications:Overall length including cutting attachment: 213 cmWeight without battery: 2.4 kgBattery: P4A 18-B36Battery charger: P4A 18-C50Battery voltage: 18 VBattery type: Li-ion

One-component, ready-to-use, strong adhesive assembly adhesive based on acrylate dispersion sticks like screws - immediately, without noise, dust and holes particularly suitable for porous surfaces compensates for unevenness for bonding in the interior work of wall coverings, panels, skirting boards made of wood and PVC, insulation , decorative and acoustic panels, cable ducts on fiber cement, aerated concrete, chipboard, MDF panels, PU rigid foam, Styrofoam, cork board, plastic strips etc., assembly of decorative parts made of PU rigid foam or polystyrene very good adhesion to all common absorbent building surfaces such as e.g. Styropor, wood, stone, plaster, etc. good adhesion to metals and plastics, spec. PVC not suitable for PE, PP, PTFE, silicones and bitumen solvent-free odorless can be painted over with aqueous systems can be corrected in a few minutes temperature resistance: -20C to +70C processing temperature: +5C to + 40 C silicone-free Other technical properties Temperature resistance: -20 to +70C Chemical basis: acrylate dispersion Processing temperature: +5 to +40C

Highly effective universal cleaner for residue-free surfaces.

B2 according to DIN 4102 Part 1 two-component, ready-to-use, self-expanding polyurethane rapid foam with excellent dimensional stability hardens independently of humidity can be cut after just 13 minutes very low emissions - EC1R PLUS licensed for the assembly and insulation of door frames, wooden door frames and window elements According to EnEV, DIN 4108-7 and RAL assembly guidelines Assembly of DIN-tested window sills and stair steps, for setting bathtub and shower tray supports, foam filling in difficult to access and poorly ventilated cavities Adheres to almost all surfaces except PE, PP, PTFE , silicone resistant to a variety of solvents, paints, chemicals, oil and gasoline resistant to aging not UV-resistant not suitable for long-term use under water foam yield: up to 9.3 liters can contents sufficient for up to 2 door frames Temperature resistance: -40C to +90C Processing temperature: adhesive surface and environment +5C to +35C / can +5C to +30C silicone-free Other technical properties Temperature range: -40 to +90C Durability: 15 Chemical basis: Polyurethane Processing temperature: +5 to +35C Container: can

Universally applicable PU foam, quick-curing, rot-proof and dimensionally stable. In spray can with spray tube.

Curved tip with spring.

Straight tip with feather.

Straight tip, without feather.

Curved tip, without spring.