Products

High-quality bow handle made of plastic, PA thermoplastic (polyamide) glass fiber reinforced, temperature resistant up to 150 C, black, RAL 9005SW

Bow knife suitable for Breviglieri Type MBE

With the most common flies, including a plastic box.

This decorative bowl is often used as a giant bowl to stylishly showcase salads, pasta, dumplings, etc. at large parties.It is also used as a sink.Enamel is not only used in the kitchen, but also also often used in the bathroom. This has to do with the properties of enamel. Finally, the non-porous, smooth surface of the sink is bacteria and dirt repellent and is easy to clean. The growth of bacteria and germs is made more difficult and this ensures optimal hygiene. The sink without a spout is intended for use on a washbasin. The water is emptied after use.The material enamel is made of iron, which was fused with glass at high temperatures, i.e. from natural raw materials. ~Care: it is best to clean it manually and with soft sponges and cloths. ~40 cm Diameter and 11.2 cm highContents: 7 litersSink made of white enamel without spoutCut and scratch-resistantBacteria-inhibiting and aroma-neutral Easy to clean Recyclable CO2-neutral made in Austria

Functional transport trough: easy to attach to the rear coupling, trough can be easily tilted, tailgate can be unlocked, tailgate can be removed, holder made of sturdy metal tube frame, for the ~ Age: 3 - 10 years

This box-shaped hanging net is suitable for the gentle storage of live fish in ponds, holding tanks, and bodies of water. The net, made of knotless polyamide (nylon), reduces the risk of injury to the fish and supports fish-friendly husbandry. Measuring 1.50 m in length, 1.00 m in width, and 0.75 m in depth, the hanging net offers ample space for temporary holding. The top edge and sides are reinforced with twine, providing additional stability during daily use. The bottom edge is equipped with a lead line weighing 110 g/m, ensuring the net remains securely taut and sinks reliably into the water. The robust construction ensures a long service life even with regular use. Advantages & Features Knotless polyamide net – particularly gentle on live fish Reinforced edges and sides – increased stability and durability 110 g/m lead line – ensures a secure hold and optimal net tension FAQ What is the net suitable for? The hanging net is suitable for the gentle storage and temporary holding of live fish. What are the net’s dimensions? The net is 1.50 m long, 1.00 m wide, and 0.75 m deep. Why is the net knotless? The knotless construction reduces the risk of injury to the fish during storage.

Egg box made of gray cardboard in which 12 quail eggs can be stored safely and securely. Ideal for the market, direct marketing or just for storing the delicate quail eggs. Made of cardboard, therefore environmentally friendly and recyclable. Color: gray, price per piece.

Live trap with two-sided snap or trap door, ideal for safe and animal-friendly catching of e.g. B. ~Foxes, stray cats, raccoons, martens and other animals. The sturdy metal mesh gives you a direct view of your animal trap without putting yourself or the caught animal in danger. Protect your home and garden - the animal-friendly way! Extremely quick-closing and escape-proof trap or snap door with reinforced frame, harmless to humans, durable thanks to hot-dip galvanized mesh with super-strong 3.3 mm wire, wooden handle for safe transport, easy to prepare and attach the bait thanks to helpful accessories (metal pliers, Egg holder, meat skewer), extremely stable and durable, pre-assembled and ready for immediate use. Wire thickness: 3.3mm~ Wire mesh: 38 x 38 mm~ Weight: 6.2kg L x W x H: 105 x 26 x 26 cm.FAIE TIP: When using it as a marten trap, it is recommended to darken the trap and line the wire mesh base with leaves!

​Wire mesh live trap with a two-sided snap or trap door,ideal for safely and humanely catching animals such as foxes, stray cats, raccoons, martens, and other animals.The sturdy metal mesh allows you to see directly into your trap without endangering yourself or the trapped animal.Wooden handle for safe transport, easy preparation and attachment of the bait with helpful accessories (metal tongs, egg holder, meat skewer).Pre-assembled and ready for immediate use. Central door for easy bait placement.Wire thickness: 3.3 mm.Wire mesh: 38 x 38 mm.Weight: 9.7 kg. L x W x H: 120 x 33 x 42 cm.FAIR TIP: When used as a marten trap, we recommend darkening the trap and lining the wire mesh floor with leaves!Please observe the regional hunting regulations regarding live hunting!

Occurrence: various boxwood species Main symptoms: eaten leaves, light beige in color light green feces crumbs in the web and under the plant in severe infestation webs clearly visible Biology: The larva spins itself between the leaves and hibernates. In spring, when temperatures rise to over 7C for a longer period of time, the caterpillars start feeding again. They usually go through 6 larval stages during their development into pupae. The females, which live for around 8 days, lay their eggs on the underside of the leaves. Under favorable climatic conditions, the development of a second and third generation per year is possible. Egg laying: female lays approx. 100-150 eggs Caterpillar stage (damage stage): approx. 10 weeks at 15C for approx. 3 weeks 25-30C Lifespan of the butterflies: approx. 8-9 days Flight time of the first generation: mid-March to early April (at dusk) Flight time of the second &~ third generation: until OctoberApplication: Assemble the trap and attach it with the included wire depending on the area of use. (The exact assembly instructions and the area of use are described in detail for each pheromone trap.) In order not to lure the pest directly into the crops to be protected, the trap should be hung in another nearby tree, for example. If this is not possible, the trap can be attached to a stake. Hang the trap between the main wind direction and the tree, at eye level. The trap entrances must not be blocked by branches and leaves. Each trap should be checked at regular intervals of 2-3 days. Whenever the trap is checked, the glue base must be cleaned of adhering insects using an auxiliary instrument (e.g. twig, wooden spatula) if necessary so that the full glue surface is retained. If it is heavily soiled, replace the glue base or re-glue it with Soveurode special glue (spray glue). Replace the attractant stubble and, if necessary, the glue base after 4-8 weeks.The traps must be hung up before the moth begins to fly. A trap set consists of: 1 trap body (WitaTrap Delta Super Trap grp) 2 glue bases (packaged separately) 2 pheromone stubble (packaged separately) Hanging wire for assembly and a precise description.

Suspenders with practical clips, yellow, 35mm, one size.

Foldable, galvanized, hole spacing 30 mm.

for trailer lighting socket

This top link bracket enables hydraulic top links to be securely mounted on the tractor and ensures a stable attachment to the tractor. The robust design makes installation easy and reliably holds the top link in position when it is not in use. Suitable as a practical retrofit or spare part for hydraulic top links. Advantages & Features • Simple, robust mounting for the retaining bracket of a top link. • Tractor-side design – secure and neat mounting. • Robust steel construction – durable and resilient in daily use. • Easy retrofitting – ideal as a replacement or addition to agricultural vehicles. Frequently Asked Questions What is the mount used for? It is used to secure or mount the retaining bracket of a (hydraulic) top link on the tractor side. Is the bracket suitable for retrofitting? Yes, it is suitable as a spare part or for retrofitting compatible tractors. Is a top link bracket or a top link included in the scope of delivery? No, only the tractor-side bracket is supplied. Translated with DeepL.com (free version)

for one-man operation, can also be used for coupling systems - working pressure 6-12 bar - includes a hose for suctioning liquids - dimensions: 225x135x192 mm (LxWxH).

enables a clean oil change by suction - suitable for engine, transmission and rear axle oils and other non-corrosive liquids - suction hose diameter in 9.8 - 8.0 - 6.7 - 4.5 mm for suction through the oil dipstick -Tube - 7.5 l container, with foot for a firm stand, for holding large amounts of oil - suitable for extracting oil from e.g. Smart but also for all other vehicles where an oil change needs to be carried out without using a lifting platform - with special silicone Brake bleeding hose with valve for one-handed operation - makes it easier to bleed brake systems on all vehicles - the built-in hand vacuum pump enables brake bleeding even without a compressed air connection.

Sheath 2300 mm long, 12 mm, rope 3800 mm long, 5 mm, incl. insert pocketReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome, tab cross section 51x10 mm.

Sheath 3500 mm long, 12 mm, rope 6200 mm long, 5 mm, including insert pocket, tab cross-section 51x10 mmReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome.

Sheath 2300 mm long, 12 mm, rope 5200 mm long, 5 mm, incl. insert pocketReversible brake cable for vehicles up to a permissible total weight of 4000 kg, yellow chrome, tab cross section 51x10 mm.

Galvanized cable pull, cable connection thread M8, sleeve length 1230 mm, cable length 1440 mm, bell outer dimension 22 mm

Mixture of white spirits and acetone free of chlorinated solvents short exposure time for cleaning brake systems, clutch parts, etc. removes oil, grease, wax and other deposits without leaving any residue ideal for use in the assembly and final treatment of workpieces, especially before painting applicable in the automotive industry, for removing brake dust or brake fluid also suitable for glass or ceramics.

Brake cleaner for cleaning brake systems, clutch parts, etc. Removes oil, grease, wax and other deposits without leaving any residue. With a very short exposure time, ideal for assembly and final treatment of workpieces, especially before painting. Can also be used in the automotive sector - to remove brake dust or brake fluid. Also suitable for glass or ceramics! Free from chlorinated solvents.

With 2 return springs. Single-acting, total length: 360 mm, stroke: 110 mm, piston rod 30 mm, connection: R3/8"~ IG.