Products

With 2 return springs. Single-acting, total length: 360 mm, stroke: 110 mm, piston rod 30 mm, connection: R3/8"~ IG.

With built-in return spring, installation length: 280 mm, stroke: 100 mm, cylinder inner 40 mm, connection: R1/4"~ Female thread, cylinder outer 50 mm, bolt 21 mm, fork slot 14.5x40 mm,

​Pull cylinder with built-in release spring, installation length centre-to-centre 405 mm, total length 430 mm, stroke: 85 mm, cylinder inner diameter 35 mm, cylinder outer diameter 45 mm, piston rod 25 mm, forks with 11 mm holes, connection: R 3/8"UF AG.

​For use with handbrake and footbrake  Width: 48 mmOuter diameter: ø 230 mmToothing: 44 x 48 Number of teeth: 23Reliable power transmission for handbrakes and footbrakes, precisely fitting brake drum for consistent braking performance. Outer diameter 230 mm, width 48 mm, pitch 44 x 48, 23 teeth. 

Original Steyr CNH spare part, ET no. 1-33-135-400, storage container,suitable for Steyr: Series 8000 SK1 and SK2 8060, 8070, 8080, 8090. Series 8100 SK1 and SK2: 8100, 8110, 8120, 8130. 900 series: 942, 948, 955, 964, 970, M948, M952, M958, M963, M968, M975. 9000 Series: 9078, 9086, 9094, M9078, M9083, M9086, M9094, 9080M, 9090M, 9100M. 9100 series: 9105, 9125, 9145. CVT series: 6140, 6150, 6160, 6175, 6195. suitable for case. CS Series: CS48, CS52, CS58, CS63, CS68, CS75

Suitable for all brake systems, miscible with any other brake fluid, boiling point above 260C, wet boiling point above 145C. 1L container.

For changing brake fluid quickly and easily. The 2-chamber system prevents the formation of air bubbles. Complete with 8-piece accessory set.

Steel flex, bright, external thread M10x1 that can be rotated on both sides with internal and external cones.

Brake hose for compressed air brake systems in motor vehicles and trailer vehicles. The compressed air hose is 100% pressure tested according to DIN 74310 and has a corded textile insert. The core and the top are made of black, smooth EPDM. The brake hose is very abrasion-resistant, resistant to aging and weather. Roll length 10m

Length: 450mm

Length 320.00 mm

For Steyr 80, M10x1.2 flat connector.

Closer, rest position "~Off"~

Cable with plug

Version: with tension spring

Switch for brake light or start safety 12/24V, 4 flat plugs,IP67, can be used instead of CNH: 82026949, 5163618, 47132449, Steyr: 321564850

PVC, 2 flat connectors, thread 12 mm, thread length 35 mm.

With rubber cover cap.

Passend zu Massey Ferguson Serie 200, 500

Passend zu Massey Ferguson Serie 300

This brake light switch for the Steyr Plus series and Lindner operates as a normally closed contact and breaks the circuit when actuated. Hole spacing 23 mm, 2x flat plug connections. Advantages & Features • Normally closed function – the circuit is interrupted when the switch is actuated • 23 mm hole spacing – suitable for specific mounting positions • 2x flat plug connections – simple electrical connection Frequently Asked Questions Which vehicles is the switch suitable for? The brake light switch is designed for vehicles in the Steyr Plus series and Lindner. How does the switch work? In the neutral position, the circuit is open. When the switch is pressed, the circuit is closed. Translated with DeepL.com (free version)

including holding palletclosed when pulled

Length: 90 mmWidth: 74 mm Height: 15 mm4 pieces

For cleaning and degreasing. Removes oil, grease, wax, silicone, brake dust, etc. The spray is acetone-free and has good material compatibility with paint and plastic.