--------------------------
Now NEW - BRIXIES Plus Agricultural Building Blocks
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb
€0.00*

Spur gear drive

Spur gear m5

Universal gearbox imr

Spare parts for gearboxes

Scraper floor gearbox

Spur gear m7

Spur gear m10

Filter
Gearbox M10 1:3
#FA125568
Bondioli & Pavesi Gearbox M10 1:3
Sale and shipment by: FAIE Handels GmbH
​For various types of application, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are supplied without oil filling. General technical data: Inlet connection: 1 3/8" Output connection: Ø 35 h6 Reversal of direction of rotation: yes In general, torque peaks up to 2 times the nominal torque do not cause damage to the individual gearbox components. However, complete integrity can only be guaranteed by a suitable safety device.

€898.00*
Gearbox RT160 8.4:1 1500Nm, bore ø40mm
#FA110801
BERMA Gearbox RT160 8.4:1 1500Nm, bore ø40mm
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!

€598.00*
NEU
Gearbox RT190 10,2:1 1900Nm, bore ø40mm
#FA130726
BERMA Gearbox RT190 10,2:1 1900Nm, bore ø40mm
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!

€798.00*
Gearbox universal IMR1
#FA31033
Bondioli & Pavesi Gearbox universal IMR1
Sale and shipment by: FAIE Handels GmbH
With 5 different possible uses.1) Input X, output Y: Reduction 2:1 with reversal of direction of rotation 2) Input Reduction 2:1 with constant direction of rotation 3) Input Z (Y), output Y (Z): Ratio 1:1 with reversal of direction of rotation < strong>4) Input Y, output X: Ratio 1:2 with reversal of direction of rotation 5) Input Z, output Direction of rotation. Technical data: 14.7 kW, 540 rpm or 1000 rpm, Connections: 3x13/8x6 (inner profile). 1 piece of PTO shaft stub (as shown) included in delivery. A mounting console is attached to the gearbox. Filled with gear slime EPO-0.3 kg.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€598.00*
IMR 6 transmission gear
#FA33245
Bondioli & Pavesi IMR 6 transmission gear
Sale and shipment by: FAIE Handels GmbH
Gear ratio 1:2, same direction of rotation, weight: 26 kgInputx: 540 rpm, 51.5 kW, 928 Nm, connection 1 3/8"x6 stubsOutput y: 1080 rpm, 460 Nm, connection 1 3/8"x6 inner profileIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€954.00*
M5 transmission gear
#32391
Bondioli & Pavesi M5 transmission gear
Speed (rpm): 1620 | Torque (Nm): 152 | Translation: 1 : 3
Sale and shipment by: FAIE Handels GmbH
For various types of applications, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are delivered without oil filling. General technical data: ~Input connection: 1 3/8" ~Output connection: 30 h6 ~Reversal of direction of rotation: yes ~Height H: 294 mm  ~Width B1: 110 mm ~Width B2: 215 mmIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Variants from €579.00*
€579.00*
Multifunctional gearbox IMR 6
#FA69143
Bondioli & Pavesi Multifunctional gearbox IMR 6
Sale and shipment by: FAIE Handels GmbH
Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€954.00*
Reduction gear front PTO shaft M7 1.9:1
#FA59691
Bondioli & Pavesi Reduction gear front PTO shaft M7 1.9:1
Sale and shipment by: FAIE Handels GmbH
Particularly suitable for attachment to the front PTO shaft to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The transmission is mounted on the tractor side.Input Y:PTO shaft stub or internal toothing540/1000 rpm, 26.4/51.5 kW, 477/928 NmConnection 1 3/8x6, internal or external toothingPossibility with through drive 1:1 (direction of rotation constant).Output X:284/ 526 rpm, 482/895 NmConnection 1 3/8x6 external toothingReversal of direction of rotationIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€939.00*
Reduction gear M7 1.9:1
#FA35037
Bondioli & Pavesi Reduction gear M7 1.9:1
Sale and shipment by: FAIE Handels GmbH
Especially suitable for the front PTO to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The gearbox is installed on the device side.Input Y:540/1000 rpm26.4/39.7 kW 477/386 NmConnection 1 3/8x6Output X:284/526 rpm895/725 NmConnection 1 3/8x6 inner profile Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same). In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€875.00*
Reversing gear M10 1:1
#35433
Reversing gear M10 1:1
Gearbox: M10 1:1
Sale and shipment by: FAIE Handels GmbH
Connection input (y): 1-3/8x6 (inner profile)~Connection output (x): 1-3/8x6~ Reversal of direction of rotation

€998.00*
Reversing gear M5, 1:1
#FA30449
Bondioli & Pavesi Reversing gear M5, 1:1
Sale and shipment by: FAIE Handels GmbH
Technical data: 22 kW, 540 rpm, 395 Nm Input connection: 1-3/8x6 (inner profile) Output connection: 1-3/8x6 1. Output shaft: direction of rotation remains the same 2nd output shaft: reversal of direction of rotationIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€598.00*
Reversing gear M7 1:1
#FA38132
Bondioli & Pavesi Reversing gear M7 1:1
Sale and shipment by: FAIE Handels GmbH
Reversing or reversing gear to change the direction of rotation with through drive.Input Y:540 rpmPower: 51.5 kWTorque: 910 Nm Connection 1 3/8x6Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same).In general, torque peaks up to 2 times the nominal torque do not lead to any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€875.00*
RT300 scraper floor gear 29.5:1 3000Nm
#34110
BERMA RT300 scraper floor gear 29.5:1 3000Nm
Ø shaft (mm): 40
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Variants from €879.00*
€879.00*
Scraper floor gearbox RT150 12:1 1500Nm
#52783
BERMA Scraper floor gearbox RT150 12:1 1500Nm
recommended oil motor: 18397, 18399 | Ø shaft (mm): 35
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Variants from €625.00*
€625.00*

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.