Transmission
#FA106833
Agreto
AGRETO operating hours counter RotoCounter
Sale and shipment by: FAIE Handels GmbH
Electronic operating hours counter for machines with PTO drive or rotating parts. The RotoCounter is particularly suitable for shared and rental machines to check and bill the operating hours incurred during use. The measurement is activated via the external sensor. The sensor works without a magnet, but requires elevations or depressions that rotate past the inductive sensor. The AGRETO RotoCounter operating hours counter can be mounted in any position and is completely tamper-proof thanks to a mounting plate with lock.The 6-digit display is in hours and minutes on a permanently switched on LCD display. Dust and waterproof according to protection class IP68 and insensitive to oil and dirt.Scope of delivery: Operating hours counter, sensor with 2m cable, mounting plate with lock and screws, operating instructions.
#FA72297
Bondioli & Pavesi
Angle gear 1018 for circular saws with ratio 1:2.78, direction of rotation remains the same
Sale and shipment by: FAIE Handels GmbH
The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications< /li>
#FA51049
Bondioli & Pavesi
Angle gear 1018 for circular saws with ratio 1:2.78, direction of rotation reversed
Sale and shipment by: FAIE Handels GmbH
The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm.Compact and light< li>High-quality workmanshipHigh torqueLong service lifeUniversal applications
#FA64540
Bondioli & Pavesi
Angle gear 1020 for circular saws with ratio 1:2.78, direction of rotation remains the same
Sale and shipment by: FAIE Handels GmbH
The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. ~ ~The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications < /ul>
#FA59916
Bondioli & Pavesi
Angle gear 1020 for circular saws with ratio 1:2.78, direction of rotation reversed
Sale and shipment by: FAIE Handels GmbH
The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~ ~ The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm.Compact and lightweightHigh-quality workmanshipHigh torqueLong service lifeUniversal applications
#59917
Bondioli & Pavesi
Angle gear 2020 with ratio 1:2.78
Direction of rotation:
gleichbleibend
|
Ø shaft (mm):
30
Sale and shipment by: FAIE Handels GmbH
The 2020 angular gearbox is a compact gearbox designed for heavy-duty use. The gearbox has a transmission ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is reversed or the same as the direction of rotation of the input shaft (looking at the visible shaft end). The angular gearbox is equipped with a robust cast housing, a 1 3/8 x 6 PTO profile at the input and an output shaft with a diameter of 25 mm (order no. 65792) and 30 mm (order no. 59917). The gearbox can absorb torque peaks of up to 2 times the nominal torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. The maximum power transmission is 9kW at 540rpm and 14kW at 1000rpm.Compact and robustHigh-quality workmanshipHigh torqueLong service lifeUniversal applications
Variants from €695.00*
#FA44819
Bondioli & Pavesi
Angle gear 2050 1:1.46
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 37 kW (50 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,46Max. power (540 rpm) approx. 37 kW / 50 hpMax. output torque up to 446 Nm (at 540 rpm)Material High-quality grey cast ironApplication Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#FA112326
Centering ring 66mm to 36.5mm BG3/BG2
Sale and shipment by: FAIE Handels GmbH
Centering ring for hydraulic pumps of assembly 2 in order to be able to use them on the gearbox of assembly 3. The ring has an outer diameter of 66mm and an inner diameter (centering seat of the BG 2 hydraulic pump) of 36.5mm.
#FA125568
Bondioli & Pavesi
Gearbox M10 1:3
Sale and shipment by: FAIE Handels GmbH
For various types of application, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are supplied without oil filling. General technical data: Inlet connection: 1 3/8" Output connection: Ø 35 h6 Reversal of direction of rotation: yes In general, torque peaks up to 2 times the nominal torque do not cause damage to the individual gearbox components. However, complete integrity can only be guaranteed by a suitable safety device.
#FA110801
BERMA
Gearbox RT160 8.4:1 1500Nm, bore ø40mm
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!
NEU
#FA130726
BERMA
Gearbox RT190 10,2:1 1900Nm, bore ø40mm
Sale and shipment by: FAIE Handels GmbH
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!
#FA62922
Bondioli & Pavesi
Gearbox S2050 1,46:1 PTO profile 1 3/8 x 6
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 28 kW (38 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1,46:1Max. power (540 rpm) approx. 28 kW / 38 hpMax. output torque up to 722 Nm (at 540 rpm)Material High-quality grey cast ironApplication Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#FA37195
Bondioli & Pavesi
Gearbox S2050 1:1 PTO profile 1 3/8 x 6
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 49 kW (66 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1Max. power (540 rpm) approx. 49 kW / 66 hpMax. output torque up to 859 Nm (at 540 rpm)Material High-quality grey cast ironApplication Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#FA37196
Bondioli & Pavesi
Gearbox S2050 1:1,91 PTO profile 1 3/8 x 6
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 29 kW (39,44 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,91Max. power (540 rpm) approx. 29 kW / 39,44 hpMax. output torque up to 272 Nm (at 540 rpm)Material High-quality grey cast ironApplication Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#74325
Bondioli & Pavesi
Gearbox S2100 1:1 PTO profile 1 3/8 x 6
Profile:
1 3/8x6
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2100 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2100 series gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2100 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2100 is a powerhouse for demanding tasks, delivering up to 81 kW (110 hp) at 540 rpm in a 1:1 transmission ratio, or an impressive 125 kW (170 hp) at 1000 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1Max. power (540 rpm) approx. 81 kW / 110 hpMax. output torque up to 1431 Nm (at 540 rpm)Material: High-quality grey cast ironApplication: Mulchers, larger tillers, feed mixersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#FA68090
Bondioli & Pavesi
Gearbox S2100 1:1,92 PTO profile 1 3/8 x 6
Sale and shipment by: FAIE Handels GmbH
Maximum power transmission for professionals: Bondioli & Pavesi S2100 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2100 series gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2100 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2100 is a powerhouse for demanding tasks, delivering up to 51 kW (69 hp) at 540 rpm in a 1:1,92 transmission ratio, or an impressive 79 kW (107 hp) at 1000 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,92Max. power (540 rpm) approx. 51 kW / 69 hpMax. output torque up to 474 Nm (at 540 rpm)Material: High-quality grey cast ironApplication: Mulchers, larger tillers, feed mixersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.
#FA31033
Bondioli & Pavesi
Gearbox universal IMR1
Sale and shipment by: FAIE Handels GmbH
With 5 different possible uses.1) Input X, output Y: Reduction 2:1 with reversal of direction of rotation 2) Input Reduction 2:1 with constant direction of rotation 3) Input Z (Y), output Y (Z): Ratio 1:1 with reversal of direction of rotation < strong>4) Input Y, output X: Ratio 1:2 with reversal of direction of rotation 5) Input Z, output Direction of rotation. Technical data: 14.7 kW, 540 rpm or 1000 rpm, Connections: 3x13/8x6 (inner profile). 1 piece of PTO shaft stub (as shown) included in delivery. A mounting console is attached to the gearbox. Filled with gear slime EPO-0.3 kg.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
#FA33245
Bondioli & Pavesi
IMR 6 transmission gear
Sale and shipment by: FAIE Handels GmbH
Gear ratio 1:2, same direction of rotation, weight: 26 kgInputx: 540 rpm, 51.5 kW, 928 Nm, connection 1 3/8"x6 stubsOutput y: 1080 rpm, 460 Nm, connection 1 3/8"x6 inner profileIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
#32391
Bondioli & Pavesi
M5 transmission gear
Speed (rpm):
1620
|
Torque (Nm):
152
|
Translation:
1 : 3
Sale and shipment by: FAIE Handels GmbH
For various types of applications, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are delivered without oil filling. General technical data: ~Input connection: 1 3/8" ~Output connection: 30 h6 ~Reversal of direction of rotation: yes ~Height H: 294 mm ~Width B1: 110 mm ~Width B2: 215 mmIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
Variants from €579.00*
#FA69143
Bondioli & Pavesi
Multifunctional gearbox IMR 6
Sale and shipment by: FAIE Handels GmbH
Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
#115033
Emis
Operating hours counter with speed display
Profile:
für Zapfwellenprofil 1 /3/4"x6
Sale and shipment by: FAIE Handels GmbH
Advantages:Accurate operating hours recording, speed display from 100 rpmManipulation-proofEasy installation, robust, reliable constructionNo additional costs due to battery operation Power supply necessary, long battery life Cost-effective purchase Function: A sensor disk with an integrated magnet is mounted on the PTO connecting shaft on the implement. At a short distance from this there is an inductive sensor that records the rotational movements and forwards them to the counting device. The counting process/time measurement only begins when the idle speed of the PTO shaft has exceeded 100 rpm. The counting device is equipped with a digital hour and minute display. The switch between operating hours display and speed display occurs automatically. As soon as the revolutions of 100 rpm are reached, the speed is displayed. When the drive shaft subsequently comes to a standstill, the display switches to the operating hours.Easy installation:The encoder disc is pushed over the standardized PTO shaft connecting piece and secured with a locking screw. An inductive sensor records the speed and passes it on to the operating hours counter. The cable length from the sensor to the display is 1.5m.
Variants from €359.00*
#FA59691
Bondioli & Pavesi
Reduction gear front PTO shaft M7 1.9:1
Sale and shipment by: FAIE Handels GmbH
Particularly suitable for attachment to the front PTO shaft to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The transmission is mounted on the tractor side.Input Y:PTO shaft stub or internal toothing540/1000 rpm, 26.4/51.5 kW, 477/928 NmConnection 1 3/8x6, internal or external toothingPossibility with through drive 1:1 (direction of rotation constant).Output X:284/ 526 rpm, 482/895 NmConnection 1 3/8x6 external toothingReversal of direction of rotationIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
#FA35037
Bondioli & Pavesi
Reduction gear M7 1.9:1
Sale and shipment by: FAIE Handels GmbH
Especially suitable for the front PTO to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The gearbox is installed on the device side.Input Y:540/1000 rpm26.4/39.7 kW 477/386 NmConnection 1 3/8x6Output X:284/526 rpm895/725 NmConnection 1 3/8x6 inner profile Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same). In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
#FA123802
Reduction gearbox 2 : 1 Gr.2 for oil engines with SAE-A connection flange and shaft-ø 25 mm
Sale and shipment by: FAIE Handels GmbH
The 95000 series reduction gearbox is a compact gearbox designed for use with hydraulic motors. The gearbox has a reduction ratio of 2:1, which means that the speed at the output of the gearbox is 2 times slower than the speed at the input. The direction of rotation of the output shaft is the reverse of the direction of rotation of the input shaft (viewed at the visible shaft end). The gearbox is equipped with a robust aluminium housing. The input side has a bore with a diameter of 25 mm and a keyway of 8 mm. The connecting flange is suitable for oil motors with an SAE-A flange.The output side is a hollow shaft with a diameter of 35 mm and a keyway of 10 mm. Four M10 holes with a bolt circle diameter of 110 mm are arranged on the output side for fastening the gearbox. Please fill up and check the oil level before commissioning the gearbox. The maximum power transmission is 10 kW.Compact and robust High-quality workmanship High torque Long service life Universal application possibilities
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.