Vehicle construction
Our offer
This brake light switch for the Steyr Plus series and Lindner operates as a normally closed contact and breaks the circuit when actuated. Hole spacing 23 mm, 2x flat plug connections. Advantages & Features • Normally closed function – the circuit is interrupted when the switch is actuated • 23 mm hole spacing – suitable for specific mounting positions • 2x flat plug connections – simple electrical connection Frequently Asked Questions Which vehicles is the switch suitable for? The brake light switch is designed for vehicles in the Steyr Plus series and Lindner. How does the switch work? In the neutral position, the circuit is open. When the switch is pressed, the circuit is closed. Translated with DeepL.com (free version)
With trailer ball pin 50mm and trailer towing hitch, anti-twist, A: 22mm, B: 661mm, C: 19mm, D: 775 mm (no StvO approval)With the Cat 1 field rail triangle you can attach attachments to your tractor /Attach tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower links and the upper links. Lower link bolts: 22mm, upper link bolts: 19mmThe field rail triangle is delivered including bolts and linchpins.TOP price-performance ratio
Consisting of: ~2 pieces of lower link balls with catch profile, inner 28.5 mm, outer 56 mm2 pieces of lower link balls, inner 28.5 mm, outer 56 mm1 piece top link ball, inner 25.4 mm, outer 50 mm
With trailer ball pin 50mm and trailer towing hitch, anti-twist, field rail 932mm, 9 holes 28mm, not homologated (no StvO approval)With the field rail triangle Cat 2 you can attach attachments to your tractor/tractor. The triangle has both a trailer ball pin K50 and a trailer towing hitch.The field rail triangle is twist-proof and thus prevents accidents. It is attached to both the lower link and the upper link.Lower link bolt: 28mm, upper link bolt: 25mmThe field rail triangle is delivered including bolts and linch pins.TOP price-performance ratio< /li>
Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt.
39 PCS high power LEDs, single, double flash, 160 flashes/min.Magnet, suction cup attachment, operating temperature: -30 to +50COn/off switch for selecting the flash image, battery capacity display 4 hours operating time with 4 hours charging timeCharging cable 1200mm for cigarette lighterApproved up to 80 km/hHeight: 116mm, diameter: 142mmRadio suppressed EMC, ECE, R65, IP66
The high-quality LED work light is equipped with highly efficient CREE LEDs and a die-cast aluminum housing. The FAIE LED headlight offers excellent light parameters and very good heat dissipation. The headlight is characterized by low power consumption - only 34W. Compact dimensions allow the headlights to be installed in hard-to-reach places. The housing and other lamp parts are made of high-quality materials that are very resistant to both high and low temperatures, mechanical damage and vibration.Technical data: ~universal supply voltage: 12V - 55V DC ~Power consumption: 12V/24V/48V = 2.8A/1.4A/0.7A ~Rated power: 34W ~Color temperature: 6,000 Kelvin ~Measured Light output - min 2,800 lumens (real measured) ~Lamp with aluminum housing, 9x CREE LEDs of the latest generation ~Electromagnetic compatibility - EMC certified ~Protection rating: IP68 (dust-proof and waterproof) ~Shock resistance - IK ~Operating temperature: -40C to +50C ~Connection cable: 1500 mm ~Wide beam 60 ~Special lens made of polycarbonate< br> ~reverse polarity protection ~fixed polarization: GROUND = white wire~ (+) = black wire
suitable for Steyr 80 series SK2 cabinSteyr 900, 9000 series, Lindner GeoTracFendt 200, 300, 500, GT, Vario10-30V, 30x2W, 3280Lumen,Working temperature -45C/+55C, IP69KEMC, die-cast aluminum housingSize: 183x102x61mm, cable length 1000mm
60 mm, length 2000 mm, 40-120C, suitable for Steyr T80-290. Screw-in thread M10x1 on the sensor
For coupling front and rear implements, reinforced version.
All Products
Stepping relays are used where consumers are to be switched on or off using a switch/button, e.g. work lights, seat valves, directional control valves, etc.Ie, if a current is applied to terminal 15 (button pressed once), the relay switches on terminal 87 and holds itself - current on terminal 87 despite releasing the button! When you press the button (impulse) again, the relay switches off again and terminal 87 is de-energized - impulse switch or toggle flip-flop.In the rest position of the relay, terminal 87a is constantly supplied with power and is in one Changeover function with terminal 87.Connections: 30 directly from the battery, continuous positive 87 consumer 1 87a consumer 2, constantly supplied with power over 30 when the relay is in the rest position 31 ground15 of switch/button, switching current 87, 87a changeover function (alternating current on 87 &~ 87a)
Instrument panel with 13 indicator lights / symbols
Die-cast aluminum, for shutting off compressed air lines
Suitable for all tractors (tractors) with a curved steering wheel, 30. Complete with plate and screws.
with foldable fastening part
with additional adjustment range (H), height (retracted) 630 mm
with additional adjustment range (H), height (retracted) 680 mm
Support load 4000kg, height 620-930mm
Automatic folding mechanism, galvanized, solid rubber wheel, without clamp holder, with mounting plate.
With semi-automatic folding process, spring locking.
three-stage with additional adjustment range (H), 2 lifting speeds
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
Complete with connection cable set, 0-4000 rpm, Ø 80 mm, with adapter ring for 100 mm diameter.The signal for RPM measurement is supplied via terminal W from the alternator.10-32V analog LCD tachometer with stepper motor technology, 4000 rpm, white LED illumination, and an orange hour meter.Drilling template with 100.5 mm diameter, IP65 rated on the front.Operating temperature -20°C to +90°C.Programmable via two buttons on the back of the instrument.4-pin Molex Minifit Jr. connector.90 cm connection cable included.EMC: ISO 7637-2 ISO 2575Technical specifications:Rated voltage: 10-32 VDisplay type: analog - digitalWidth: 10 cmOperating temperature: -20° / +85° CScale: 0-4000 RPMBore diameter: 100 mm
(Without testing) Thread 19 mm, A: 19 mm, B: 70 mm, ball 50 mm, recommended trailer load 500 kg!
Tested according to DIN 74058 and ISO. Complete with self-locking nut. Permissible trailer load 3500 kg, tongue load 100 kg. Thread M22x1.5, A: 26 mm, B: 65 mm.
82 mm, 2 screws M5, screw spacing 45 mm, base plate metal
Two-chamber light, base plate made of plastic, screw fastening, 2 holes 5mm, hole spacing 45mm, LxWxH: 95x85x55mm
(without lamps), rounded shape, WxHxD: 107x100x52 mm.
Plastic housing 140 mm, 2 holes for M6 screws, 45 mm hole spacing.
Three-chamber light HELLA, LxWxH: 95x90x54 mm, 2 holes M5, 45 mm hole spacing, suitable for e.g. Case IH, John Deere, Deutz, Fendt, ...
Suitable for Fendt series: Farmer, Farmer 100 / 300, Favorit 500, ~ ~GTADimensions: 158x64 Hole spacing M 5: 45 mm &~ 98 mmwith license plate lighting thanks to replaceable lens insert
LxWxH: 300x61x92 mm, completely wired, with snap fastening/clamped, suitable for e.g. Fiat, Landini, MF, ...
completely wired, LxWxD: 155x80x150/50 mm sloping mounting plate, hole spacing 113 mm, suitable for e.g. Ford, ...
Unser Produktleiter
Franz Neuhofer
Franz has been with FAIE since 1988 and is THE professional when it comes to vehicle construction.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.