Beekeeping
All Products
A stand made entirely of stainless steel, designed specifically for Caadex honey containers.Height approx. 23 cm
Fine stainless steel honey strainer with three holders, ideal for placing on round containers. Can be used up to a container diameter of approx. 40 cm.Mesh size: 0.7 mmSieve without holder: Ø 23 cmHanging bracket: approx. 11 cm
Replacement fleece cloth for Nassenheider ProfessionalMaterial: special fleece Dimensions: approx. 210 mm x 340 mm
Part of the Mini Plus polystyrene series. Perfect for rearing offspring and queens.Lightweight, insulating material (EPS)Very weather-resistant and durableNot coated, whiteDimensions: 300 x 300 x 75mmWith feeding chamber and small ventilation grille (aluminum)Tip: An additional protective treatment with suitable paint or hive paint ensures durability!
Part of the Mini Plus polystyrene series. Perfect for rearing offspring and queens.Lightweight, insulating material (EPS)Very weather-resistant and durableNot coated, whiteDimensions: 300 x 300 x 75mmWith continuous ventilation grille (aluminum)Tip: An additional protective treatment with suitable paint or hive paint ensures durability!
Aluminum composite panel with the dimensions 21 x 34cmThis sign draws attention to flower strips, flower meadows, (wild) fruit hedges or other colorful flowering areas and at the same time raise awareness of the issues of insect mortality and biodiversity.
Suitable for use for cleaning and disinfection purposes. Protective clothing is strongly recommended. *Use biocidal products carefully! Always read the label and product information before use.
Suitable for use for cleaning and disinfection purposes. Protective clothing is strongly recommended. *Use biocidal products carefully! Always read the label and product information before use.
Dispenser with storage block for approx. 130 ml formic acid. The evaporation rate can be adjusted using a dial. Place the evaporator with the opening facing downwards over the brood nest. To counteract possible cementing by propolis, it is recommended that the evaporator is also placed on thin wooden strips.W x B x H: 25.5 x 26.9 x 1.6 cm(Not the original FAM dispenser from Andermatt!)
Dispenser with storage block. The evaporation rate can be adjusted.
Formic acid 60% for Varroa treatment at high temperatures, 1 liter.*Use biocidal products carefully! Always read the label and product information before use. Protective clothing is strongly recommended!
Formic acid 85% for Varroa treatment at low temperatures of 14-20C, 1 liter. *Use biocidal products carefully! Always read the label and product information before use. Protective clothing is strongly recommended!
Frame with straight sides for Dadant leaf brood chamber measuring 470 x 435 x 300mm.A wider top support ensures better stability.Top support thickness is 20mm, the ears are offset to 10mm. In addition, the carrier is slotted in the middle on the underside with a groove width of 4mm and a depth of approx. 3mm.10 piecesmodified top carrierStrip thickness 10mmpunched &~ wired Please note: as wood is a natural material, there may be slight dimensional deviations!
Content: 10 Stück (€2.00 / 1 Stück)
Frame with Hoffmann sides for Dadant leaf brood chamber measuring 470 x 435 x 300mm.A wider top carrier ensures better stability.Top carrier thickness is 20mm, the ears are offset to 10mm. In addition, the carrier is slotted in the middle on the underside with a groove width of 4mm and a depth of approx. 3mm.10 piecesmodified top carrierStrip thickness 10mmpunched &~ wiredPlease note: as wood is a natural material, there may be slight dimensional deviations!
Content: 10 Stück (€2.10 / 1 Stück)
Frame with straight sides for Dadant sheet honey room measuring 470x435x159mm.10 piecesperforated &~ wired
Content: 10 Stück (€2.00 / 1 Stück)
Frame with Hoffmann pages for Dadant sheet honey room with dimensions 470x435x159mm.10 piecespunched &~ wired
Content: 10 Stück (€2.10 / 1 Stück)
Frames with straight sides for German standard size full frames measuring 394x370x223mm.10 piecesperforated &~ wired
Content: 10 Stück (€1.60 / 1 Stück)
Frame with Hoffmann sides for German standard size full frames with the dimensions 394x370x223mm.10 piecesperforated &~ wired
Content: 10 Stück (€1.70 / 1 Stück)
Frames with straight sides for standard flat frames measuring 400x370x159mm.10 piecesperforated &~ wired
Content: 10 Stück (€1.60 / 1 Stück)
Frame with Hoffmann sides for standard flat frames measuring 400x370x159mm.10 piecesperforated &~ wired
Content: 10 Stück (€1.70 / 1 Stück)
Frames with straight sides for standard size full frames measuring 400x370x223mm. 10 piecesperforated &~ wired
Content: 10 Stück (€1.60 / 1 Stück)
Frame with Hoffmann sides for standard size full frames measuring 400x370x223mm.10 piecesperforated &~ wired
Content: 10 Stück (€1.70 / 1 Stück)
Frame modified, with Hoffmann sides for standard jumbo frames measuring 400 x 370 x 326mm.A wider top beam ensures better stability.Top beam thickness is 20mm, the ears are offset to 10mm. In addition, the carrier is slotted in the middle on the underside with a groove width of 4mm and a depth of approx. 3mm.10 piecesmodified top carrierStrip thickness 10mmpunched &~ wiredPlease note: as wood is a natural material, there may be slight dimensional deviations!
Content: 10 Stück (€2.10 / 1 Stück)
The two-part frame holder made of stainless steel can be used universally for all hive sizes. It can be used for hive magazines with wood thicknesses up to 22mm.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.


