Inverter & MMA Welders

​Modern, powerful compact welding inverter - built using modern inverter technologyIdeally suited for assembly work (on ladders, scaffolding, ...) and generally also for outdoor work thanks to protection class IP 21SSuitable for use on generators, e.g. in workshops, harbors, chemical plants, schools, metal construction, on construction sites, ships or for farmersSealed circuit board protects against moisture, salt spray and corrosion. Therefore also suitable for offshore useHot start: The arc ignites safely and is immediately stable thanks to the adjustable short-term increase in welding currentAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, preventing the electrode from annealingWith WG DC LiftArc ignitionArc force control: Internal monitoring of the welding current and welding voltage ensures that short circuits are resolved quickly and safely. The adjustable increase in current stabilizes the arc and the electrode can be processed without any problemsVRD (Volt Reduction Device): Voltage reduction when idle Scope of delivery:3 m welding cable 25 mm² with electrode holder 300 A3 m earth cable 25 mm² with earth clamp 300 ATechnical data: Dimensions and weights:Length approx.: 495mm Width/depth approx.: 190mmHeight approx.: 350mm Weight (net) approx.: 11.8kgAdjustment range:Electrode setting range: 20 - 250A TIG setting range: 20 - 250ADuty cycle:Duty cycle at max. current 40°C Electrode: 60% Duty cycle at max. current 40°C TIG DC: 60%Current at ED 100% 40°C Electrode: 200A Current at ED 100% 40°C TIG DC: 200AElectrical data:Supply voltage: 400±10% V Mains frequency: 50/60HzElectrode:Weldable electrodes: 1.6 - 5.0mm Standards and approvals:Standard: EN 60974-1:2012, EN 60974-10:2014 EMC class: AExplanation EMC class: This class A welding equipment is not intended for use in residential areas                         in which the power supply is provided by a public low-voltage supply system. Marking: CEPower consumption:Electrode power consumption: 8.5kVA Power consumption TIG DC: 6.3kVAElectrical connection:Required generator power: >10kVA Positive mains voltage tolerance: 10%Negative mains voltage tolerance: 10% Open circuit voltage: MMA 70.1/ TIG 69.4VConnection cable length: 2.2m Current consumption electrode: 17.7ACurrent consumption TIG: 13.1A Total electrode power: 10kVATotal power TIG: 7.4kVA

The welding power electrode inverter EASY-STICK 161 is a reliable device that is based on modern inverter technology and was specially developed for 230 volt applications. With its versatile functions, it is ideal for assembly work, be it on the ladder, scaffolding or outdoors and for use on the generator, for example in company workshops, metal construction, construction sites or for farmers.Hot Start : By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning out Arc force control: Internal monitoring of welding current and welding voltage resolves short circuits quickly and safely. This stabilizes the arc and the electrode can be processed without any problems Scope of delivery &~ Equipment3 m welding cable 16 mm with electrode holder 300 A3 m ground cable 16 mm with ground terminal 300 ATechnical data:< /li>Welding power 10 - 160 AmpFrequency: 50/60 HZOpen circuit voltage: 73VMax. Current consumption: 38AProtection rating: IP21SInsulation class: HWorking temperature: -10 - 40 degrees CelsiusRequired generator power: >~ 8.3 kVATotal power: 8.3 kVASheet thicknesses 1.0-6.0mmWeight: approx. 4.4kg Dimensions (LxWxH): 320x135x255mm

​Inexpensive electrode welder for universal use in the hobby/private sector. The electric welder has a setting range of 40-100 A and is therefore suitable for electrodes from 2.0 to 3.25 mm. Due to the 230 volt power supply and its own weight of only 13 kg, this device is also very suitable for mobile use. It is supplied complete with earth cable and earth clamp, welding cable and electrode holder as well as a slag hammer and a wire brush.

Modern, robust welding inverter for quick and easy welding of all common standard electrodes.Complete incl. 3m welding cable 16mm with electrode holder and 3m ground cable 16mm with ground terminal 200ADevices with PFC (power factor correction), VRD (voltage reduction when idle)TIG DC function = enables easy TIG welding with contact ignitionPrecise setting of the welding parameters via digital displayUniversally usable for welding anything common electrode typesConstant deposition performance is achieved through constant welding currentAll devices are constructed using modern inverter technologyThis allows small and light electrode devices to be manufacturedThis makes it ideal for assembly work (on ladders, on scaffolding, etc.) and, thanks to protection class IP 23, generally also for outdoor work. At least 30% ED for all devices. < li>Thanks to the quietly running built-in fans, the heat is dissipated well from the devices and thus a long duty cycle is achievedHot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning outArc force control: Internal monitoring of the welding current and welding voltage prevents short circuits quickly and safely dissolved This stabilizes the arc and the electrode can be processed without any problems Technical data: Length: 365mm li>Width / depth: 150mmHeight: 28mmWeight: 6.1kgConnection voltage: 160-275VType of power: ACMains frequency: 50/60HzPower consumption: MMA 22 / TIG15Total output: 5/3.5kVA Standard: IEC 60974-1:2012Protection level: IP23Insulation class: HEMC class: AMarking: CE< /li>Required generator power: >~5kVAPower plug: 16AOpen circuit voltage: 14.5VWeldable electrodes: 1.6-4, 0mmAdjustable electrode: 10-160ADuty cycle at max. current 40C electrode: 30%Current at ED 100% 40C electrode: 90A Power consumption electrode: 5kVA Sheet thicknesses: 1.0mm - 7.0mm

Modern, powerful compact welding inverter Suitable for use on generators, e.g. in company workshops, schools, metal construction, on construction sites or for farmers Protection against moisture, salt spray, corrosion thanks to a sealed circuit board also suitable offshoreDevices equipped with PFC (power factor correction), VRD (voltage reduction when idle)TIG DC function = enables simple TIG welding with contact ignitionPrecise adjustment of the Welding parameters via digital displayCan be used universally for welding all common types of electrodesConstant deposition performance is achieved through constant welding currentAll devices are constructed using modern inverter technology< /li>This allows small and light electrode devices to be manufacturedThis makes them ideal for assembly work (on ladders, on scaffolding, etc.) and, thanks to protection class IP 23, also generally for outdoor workAt least 30% ED for all devices Thanks to the quietly running built-in fans, the heat is dissipated well from the devices and thus a long duty cycle is achieved All CRAFT STICKs have the following functions as standard:Hot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick If the electrode accidentally sticks, the welding current is automatically reduced and thus prevents the electrode from burning outArc force control: Through the internal monitoring of the welding current and welding voltage, short circuits are resolved quickly and safelyThis stabilizes the arc and the electrode can can be easily processed Technical data: Length: 365mm Width/depth: 150mm Height: 28mm li>Weight (net): 6.1kgConnection voltage: 160-275VPower type: ACMains frequency: 50/60HzPower consumption: MMA 31 / TIG 22Total power: 7 / 4.8kVAStandard: IEC 60974-1:2012Protection class: IP23Insulation class: HEMC class: AMarking: CERequired generator power: >~7.0kVa Power plug: 16AOpen circuit voltage: 14.5VWorking temperature: -10 - 40 degreesWeldable electrodes: 1.6-4.0mmSetting range electrode / TIG: 10-200ADuty cycle at max. current 40 TIG DC: 30%Duty cycle at max. current 40 electrode: 30%< /li>Current at ED 100% 40C TIG DC: 110ACurrent at ED 100% 40C electrode: 110APower consumption TIG DC: 4.8kVA Power consumption electrode: 7kVA Sheet thicknesses: 1.0 - 8.0mm Scope of delivery &~ Equipment 3m welding cable 16mm with electrode holder 3m ground cable 16mm with ground terminal 200 A

The welding power electrode inverter EASY-STICK 141 is a reliable device that is based on modern inverter technology and was specially developed for 230 volt applications. With its versatile functions, it is ideal for use in workshops, schools, metal construction, construction sites or for farmers. Its robust construction and the ability to work on the generator make it a reliable companion for various welding applications.Hot Start: By automatically briefly increasing the welding current, the arc ignites safely and is immediately stableAnti-Stick: If the electrode accidentally sticks, the welding current is automatically reduced, thus preventing the electrode from burning outArc force control: Internal monitoring of the welding current and welding voltage resolves short circuits quickly and safely. This stabilizes the arc and the electrode can be processed without any problems Technical data:weldable electrodes 1.6 - 3.2mm< /li>Setting range 10-140AMains voltage 160-275VNo-load voltage 76VPower consumption electrode 4.9kVAmax . Current consumption 35AElectrode duty cycle at A max 15%Electrode welding current ED 100% 55AProtection class IP23Insulation class HWorking temperature -10 - 40CLength x width x height 320x135x255mmWeight 3.6kgRequired generator power >~8kVA< /li>Standard EN 60974-1:2006-07/EN 60974-10:2008-10Total output 8 kVASheet thicknesses 1.0 - 4.0mm< br>