--------------------------
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb

26/08/2025

Assignment plan for automotive connectors

terminal designation
Lighting and brake light systems
ancient name
54Terminal for brake light on trailer plug connection and in combination lamps, if marking is necessary15/54; 54
54fInput terminal on the flashing brake switch54f
55Clamp for fog lights55; N
56Output terminal on the light switch and input terminal on the low beam switch (shared supply line for high beam and low beam)56
56aOutput terminal on low beam switch for high beam and indicator light56a
56bOutput terminal on the low beam switch for low beam56b
56cOutput terminal for partial low beam
56dOutput terminal for headlight flasher contact
57Terminal for parking lights in motorcycle headlights (also for cars, trucks, etc. abroad)57
57aOutput terminal on the light or ignition switch for parking lights. Input terminal on the parking light switch (only if special marking is necessary for combined switches).P; 57a
57LOutput terminal for left parking light (only if special marking is necessary for combined switches)PL; 57L
57R Output terminal for parking light right (only if special marking is necessary for combined switches)
PR; 57R
58Output terminal on light switch for marker lights, tail lights, license plate lights, instrument lighting58
58bClamp for tail light switching on single-axle tractors58b
58cClamp on trailer plug connector for single-wire installation of the supply cable for the tail light on the trailer (with separate fuse protection in the trailer)58c
58dTerminal for adjustable instrument lighting58b
58LOutput terminal on the light switch for left-hand side marker lights and tail lights (if separately switchable) Terminal on trailer plug connector58
58R Output terminal on the light switch for right-hand side marker lights and tail lights (if separately switchable) Terminal on trailer plug connector
58


ISO 1724 

7-pin connector type 12 N for vehicles with 12V nominal voltage 
(The connectors must be connected according to a predefined numbering system or according to the assigned function. The numbers are arranged as in a round connector. The cable colors are for information purposes only and are not binding. Only the numbering system clearly defines the function.)

occupancy schedule


Connection
Color of insulation
Occupancy since 1991
Occupation until 1990
Terminal designation according to DIN 72552
Lamp power and type
1yellow
Left turn signalLeft turn signalL21 Watt
2bluemandatory rear fog lightNot occupied or permanent plus. No grandfathering.since 1991 only 54g or Ns21 Watt
3whitemassmass31Total lamp power
4greenRight turn signalRight turn signalR21 Watt
5brownRight rear light, right license plate light Right rear light, right license plate light
58R5W or 10W, right-hand side marker and boundary lights
6redbrake lightbrake light542x 21 Watt
7black
Left tail light, left marker light, left license plate light Left tail light, left marker light, left license plate light
58L5W or 10W, right-hand side marker and boundary light


ISO 11446

13-pin plug connection for trailer sockets

(The plugs must be connected according to a predefined numbering system. The numbers are embossed or stamped next to the contacts in a round plug. The numbers define the function of the connected cable.)

occupancy table


Connection No.
Color of insulation
Recommended conductor cross-section (mm²)
Terminal designation according to DIN 72552
Occupancy since 2004
Occupancy until 2004
1yellow
≥ 1LLeft turn signalLeft turn signal
2blue≥ 154g or NSrear fog lightrear fog light
3white≥ 1,531Ground for contacts 1 to 8Ground for contacts 1 to 8
4green≥ 1RRight turn signalRight turn signal
5brown≥ 158RTail light, marker light, license plate light, right
Tail light, marker light, license plate light, right
6red≥ 154brake lightbrake light
7black≥ 158L
Tail light, marker light, license plate light, left
Tail light, marker light, license plate light, left
8pink
≥ 1RF or ZRreverse lightreverse light
9orange≥ 2,530LPower supply (continuous positive)
Power supply (continuous positive)
10dark gray≥ 2,530g or 15 or 61Ignition switch or alternator-controlled power supply line. Either for a refrigerator or as a so-called charging line for a trailer battery.
Ignition switch or alternator-controlled power supply line. Either for a refrigerator or as a so-called charging line for a trailer battery.
11purple
≥ 2,531Mass only for contact 10free for future expansion
12light gray
reserved for future applicationsGround loop as coding for coupled trailers, connection of contact 3 (ground) with 12 on the trailer
13light blue
≥ 2,531Mass only for contact 9Ground for contacts 9 and 10