Products

The version is a mobile control block with 2 additional control devices, a switching valve from the original hydraulics to the additional control device and an operating lever for the three-point hydraulics via the additional control device. Installation is carried out using a mounting plate on the hydraulic riser pipe. The two additional control devices can be used double-acting. The outer control spool can be switched from single-acting to double-acting.The functions of the additional control valve are:Lever No. 1, Switching valve from original hydraulics to additional control unit Lever up: normal tractor hydraulic Lever down: work control valveLever No. 2, actuation of the three-point hydraulics without control hydraulics when switching to the additional control unit with lever No. 1, position downLever No. 3, double-acting control deviceLever No. 4, double-acting control device can be switched to single-acting via the changeover tap on the side of the end plate. If the changeover tap is screwed onto the seat, the control slide can be used double-acting. If the changeover cock is turned out to the stop, the function of the control slide is switched to single-acting.The operating lever of the tractor hydraulics/power lift must be in the outer hydraulics position so that the function of the additional control unit is guaranteed. The scope of delivery includes:The screws for attaching to the hydraulic block are included. ~There is also a hose package with 4 hydraulic hoses and matching hollow screws, ~ 4 pieces of clutch sleeves with dust protection and a holder for the clutch sleeves for attaching to the differential housing included. ~

This control valve is a /4-way valve that is operated manually to control single-acting and double-acting cylinders as well as hydraulic motors. The control valve from AK- Regeltechnik was developed specifically for Fiatagri tractors with Kontak hydraulics. Due to the high liter output, up to 4 control valves can be flanged directly. Since the hole pattern is completely identical to Kontak/Parker, this valve can also be installed with original Kontak/Parker control valves. The valve is a four-position device. It can be converted from double-acting to single-acting and vice versa. The control valve is a slide-sealed valve that exhibits absolutely neutral fine control behavior and allows extremely low fit leakage even at higher pressures. The device has a locked safety limit switch in the LIFTING position. If you switch further via the LOWER position, you will reach a locked floating position. This can be returned to the NEUTRAL position manually at any time.

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The valve can be mounted on the left or right using a freely positionable sealing plate. The sealing plate is included in delivery.Bosch: 0 521 609 001, 0 521 609 005, 0 521 609 009, 0 521 609 013, 0 521 609 015, 0 521 609 019, 0 521 609 021, 0 521 609 022, 0 521 609 053, 0 521 609 054, 0 521 609 062, 0 521 609 063, 0 521 609 064.0 521 609 074, 0 521 609 098. Case-IHC: 743XL-844XL, 585XL (BJ 87/88), 1055XL, 1255XL, 856XL, 956XL-1056XL, 1256XL(A)-1455XL(A), CS48-CS150, 3220, 4210, 4220, 4230, 4240. Deutz: Agro Star 4.61-6.81, Agro Tron 4.70-4.95, 6.00, 6.05, 6.15, 6.20, 6.30. Fastrac: 135, 155, 185, 525, 1115. JCB Fastrac: 130, 135, 150, 155, 185, 1115, 1135, 2115.Lindner: Geo Trac. Massey-Ferguson: 3000 series. Steyr: 900, 9000 series. Valmet: 6000, 6200 , 6300, 6400, 8000, 8100, 8200, 8300, 8400. Zetor: 3320-3341, 4320-4340, 5320-5341, 6320-6341, 7320-7540, 8520-18345 . ~Switchable from single-acting to double-acting ~Hydraulic limit switch in lifting ~Locked floating position as fourth switching position after lowering

Additional insulator for wire, strands, rope and tape up to 12 mm . Suitable for round and oval posts up to 12 mm with head insulator (open/slotted at the back). 25 pieces/bag

100x400 mm, 1 pack=2 pieces.

Aluminum board 31x15 cm coated with PVC film.

About Felix ultrasound machine~ additional range of 50 to 100 m.

Made of highly impact-resistant plastic, for resetting deeply driven wedges, weight: 400 g, length 205mm, width 60mm, height 40mm, front 10mm.

Durable follow-up felling wedge made of impact-resistant special plastic, very good propulsion, 2 longitudinal grooves on each side ensure best guidance, non-slip and good grip thanks to proven Latschbacher scales, 

Durable follow-up felling wedge made of impact-resistant special plastic, very good propulsion, 2 longitudinal grooves on each side ensure best guidance, non-slip and good grip thanks to proven Latschbacher scales, 

Particularly durable follow-up felling wedge made of extremely tough special plastic, frost-proof, very good propulsion, 2 longitudinal grooves on each side ensure the best guidance, non-slip and good grip thanks to proven Latschbacher scales,

Particularly durable follow-up felling wedge made of extremely tough special plastic, frost-proof, very good propulsion, 2 longitudinal grooves on each side ensure the best guidance, non-slip and good grip thanks to proven Latschbacher scales, 

For vehicles that are only approved for certain roads (routes) in accordance with Section 39 Para A circular yellow plate with a diameter of at least 20 cm, a black border and the Latin letter R in permanently legible and erasable black writing must be clearly visible on each of the towing vehicle and the license plate attached to the rear of the last trailer. These boards make it possible to identify vehicles with restricted registration in accordance with Section 39 Paragraph 1 KFG, which makes it easier to monitor compliance with the prescribed route.

Add a personal touch to your preserving creations with our 24-piece set of preserving labels. Specially designed for preserving jars, these self-adhesive labels are the perfect choice for stylishly labeling and decorating your homemade jams, jellies, chutneys or preserves. With enough space for the name of the contents, the date of production and even a personal message, these labels provide everything you need to present your treats in an appealing way.

Adhesive tape made of PP film, sticks well, can be rolled out quietly, width 50 mm, length 66 meters.

Two interchangeable knives, for softwood.

Adjustable fan broom from the multi-star series. The working width can be continuously adjusted between 36 and 58 cm, so that the optimal width is always available for efficient work.

Robust leaf broom, galvanized and adjustable with 1400 mm handle

​Hot-dip galvanised, adjustable pasture gate incl. assembly kit. Extendable from 1.0 to 1.7 m. Height 90 cm. The larger tube spacing complies with the applicable guidelines for keeping horses!The clear widths between the tubes are configured in such a way that horses do not get dangerously caught in the gate and are then unable to free themselvesThanks to the protective distance bar supplied, horses cannot get into the dangerously narrow space between the gate and suspension or jump up and injure themselves

​Hot-dip galvanized, adjustable pasture gate incl. assembly kit. Extendable from 1.0 to 1.7 m. Height 90 cm

​Hot-dip galvanized, adjustable pasture gate including mounting kit.Extendable from 2 to 4 meters. Height 90 cm.The wider spacing of the bars complies with current guidelines for horse keeping!The clear openings between the bars are designed to prevent horses from becoming dangerously entangled in the gate and unable to free themselves.The included safety bar prevents horses from entering the dangerously narrow gap between the gate and the hinges, or from jumping up and injuring themselves.

Adjustable pasture gate with a height of 110 cm. Stable, galvanized steel pipes, each incl. Mounting setconsisting of: 2 hinges, 1 locking option, 6 wood screws (12 x 80 mm). The gate should be able to open inwards towards the pasture!