Products

from 13-pin. Socket to 7-pin Plug

from 7-pin. Socket to 13-pin Plug

Ideal for retrofitting vehicles without a remote thermometer, for installation in the radiator hose.External thread: M14x1.5mm ~Internal thread: M10x1mm ~

Adapter for SDS-max hammer drills so that SDS Plus drills can also be used. Total length 235mm

16-piece adapter set made of chrome vanadium steel, for inserts with square and hexagonal drives, with magnetic holder. Bit adapter:Square socket to hexagon socket - 1/ 4?to 1/4?, 3/8?to 5/16?, 3/8?to 10mm, 1/2?to 10mmInsert/Socket Wrench Adapter:Internal square to external square - 1/4? to 3/8?, 3/8? to 1/4?, 3/8? to 1/2? to 3/8?, 1/2? to 3/4?, 3/4? to 1/2? Adapter for machine drive or holder:External hexagon to external square - 1/4? to 1/4?, 1/4? to 3/8?, 10mm to 1/2?Bit holder with ring magnet:65mm, quick-change function , 1/4? hexagon socket Bit holder with magnet: 60mm, 1/4 hexagon socket

CV, for 1/4", 3/8", 1/2", 3/4", for square drive inserts and ratchets.

High-quality transition pieces in the sizes: 1/4?I x 3/8A, 3/8?I x 1/4?A, 3/8?I x 1/2?A, 1/2?I x 3/8? A, 1/2?I x 3/4?A, 3/4?I x 1/2?A.

Adapter for using Krcher bayonet accessories on Krnzle devices with a D12 connector system.

Add-on shelving with 4 shelves to expand the industrial shelving system. HxWxD: 2000x1000x400mm

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The operating lever is included in delivery.

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The consumer connections A and B are located at the top and bottom of the housing. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The operating lever is included in delivery.Case-IHC: 844S, 846, 946, 1046, 1146, 1246, 743XL-856XL, 955XL-1055XL.Eicher:< /strong> King TigerFendt: 102, 103, 104, 105, 106, 108, 200S, 300, 304, 305, 306, 307, 308, 309, 310, 311, 312, 395GTA, 600, 610, 611, 612, 614, 615. Kramer: all models. Lindner: with Steyr transmission. MB-Trac: all models. Schlter: all models. Steyr: Anniversary series with control hydraulics, Plus series, Series 80.Switchable from single-acting to double-acting ~Hydraulic limit switch in lifting ~< br>Locked floating position as fourth switching position after lowering

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The consumer connections A and B are located at the top and bottom of the housing. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The operating lever is included in the scope of delivery.Deutz: All types built up to 1984, DX85, DX90, DX110, DX120, DX145 until the switch to large glass doors.Connection thread:< /strong> M18x1.5mm internal thread ~Switchable from single-acting to double-acting ~Hydraulic limit switch in lifting ~Locked floating position as fourth switching position after lowering

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The consumer connections A and B are located at the top and bottom of the housing. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation.Deutz: 07C series, DX3.10-DX4.70, Agro Prima 4.31-6.17, Agro Xtra 3.57-6.07, Star Cab Series, DX90-145 with large glass door.Switchable from single-acting to double-acting ~Hydraulic limit switch in raising ~Locked floating position as fourth switching position after lowering

The version is a mobile control block with 2 additional control devices, a switching valve from the original hydraulics to the additional control device and an operating lever for the three-point hydraulics via the additional control device. Installation is carried out using a mounting plate on the hydraulic riser pipe. The two additional control devices can be used double-acting. The outer control spool can be switched from single-acting to double-acting.The functions of the additional control valve are:Lever No. 1, Switching valve from original hydraulics to additional control unit Lever up: normal tractor hydraulic Lever down: work control valveLever No. 2, actuation of the three-point hydraulics without control hydraulics when switching to the additional control unit with lever No. 1, position downLever No. 3, double-acting control deviceLever No. 4, double-acting control device can be switched to single-acting via the changeover tap on the side of the end plate. If the changeover tap is screwed onto the seat, the control slide can be used double-acting. If the changeover cock is turned out to the stop, the function of the control slide is switched to single-acting.The operating lever of the tractor hydraulics/power lift must be in the outer hydraulics position so that the function of the additional control unit is guaranteed. The scope of delivery includes:The screws for attaching to the hydraulic block are included. ~There is also a hose package with 4 hydraulic hoses and matching hollow screws, ~ 4 pieces of clutch sleeves with dust protection and a holder for the clutch sleeves for attaching to the differential housing included. ~

This control valve is a /4-way valve that is operated manually to control single-acting and double-acting cylinders as well as hydraulic motors. The control valve from AK- Regeltechnik was developed specifically for Fiatagri tractors with Kontak hydraulics. Due to the high liter output, up to 4 control valves can be flanged directly. Since the hole pattern is completely identical to Kontak/Parker, this valve can also be installed with original Kontak/Parker control valves. The valve is a four-position device. It can be converted from double-acting to single-acting and vice versa. The control valve is a slide-sealed valve that exhibits absolutely neutral fine control behavior and allows extremely low fit leakage even at higher pressures. The device has a locked safety limit switch in the LIFTING position. If you switch further via the LOWER position, you will reach a locked floating position. This can be returned to the NEUTRAL position manually at any time.

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The valve can be mounted on the left or right using a freely positionable sealing plate. The sealing plate is included in delivery.Bosch: 0 521 609 001, 0 521 609 005, 0 521 609 009, 0 521 609 013, 0 521 609 015, 0 521 609 019, 0 521 609 021, 0 521 609 022, 0 521 609 053, 0 521 609 054, 0 521 609 062, 0 521 609 063, 0 521 609 064.0 521 609 074, 0 521 609 098. Case-IHC: 743XL-844XL, 585XL (BJ 87/88), 1055XL, 1255XL, 856XL, 956XL-1056XL, 1256XL(A)-1455XL(A), CS48-CS150, 3220, 4210, 4220, 4230, 4240. Deutz: Agro Star 4.61-6.81, Agro Tron 4.70-4.95, 6.00, 6.05, 6.15, 6.20, 6.30. Fastrac: 135, 155, 185, 525, 1115. JCB Fastrac: 130, 135, 150, 155, 185, 1115, 1135, 2115.Lindner: Geo Trac. Massey-Ferguson: 3000 series. Steyr: 900, 9000 series. Valmet: 6000, 6200 , 6300, 6400, 8000, 8100, 8200, 8300, 8400. Zetor: 3320-3341, 4320-4340, 5320-5341, 6320-6341, 7320-7540, 8520-18345 . ~Switchable from single-acting to double-acting ~Hydraulic limit switch in lifting ~Locked floating position as fourth switching position after lowering

Additional insulator for wire, strands, rope and tape up to 12 mm . Suitable for round and oval posts up to 12 mm with head insulator (open/slotted at the back). 25 pieces/bag

100x400 mm, 1 pack=2 pieces.

Aluminum board 31x15 cm coated with PVC film.

About Felix ultrasound machine~ additional range of 50 to 100 m.

Made of highly impact-resistant plastic, for resetting deeply driven wedges, weight: 400 g, length 205mm, width 60mm, height 40mm, front 10mm.

Durable follow-up felling wedge made of impact-resistant special plastic, very good propulsion, 2 longitudinal grooves on each side ensure best guidance, non-slip and good grip thanks to proven Latschbacher scales, durable

Durable follow-up felling wedge made of impact-resistant special plastic, very good propulsion, 2 longitudinal grooves on each side ensure best guidance, non-slip and good grip thanks to proven Latschbacher scales, durable

Particularly durable follow-up felling wedge made of extremely tough special plastic, frost-proof, very good propulsion, 2 longitudinal grooves on each side ensure the best guidance, non-slip and good grip thanks to proven Latschbacher scales, particularly durable