Agricultural machinery spare parts

Metal wheel 2.0 Basic suitable for many motor mowers up to a weight of 150kg. The metal wheel has a diameter of 420mm (corresponds to rubber tires 4.00 x 8), a width of 190mm and the centering hole has a diameter of 60.5mm. The fastening hub is made with 2 hole circles 4x100mm. A hole circle with the hole diameter for M12 collar screws and a hole circle for fastening with cone screws with a hole diameter of 15mm. The cone rings are welded into the hub.The delivery consists of a pair of metal wheels!The powder-coated metal wheel has a hardened tread on the outer contour and is therefore very resistant to abrasion. Thanks to the nested and welded construction, the wheel is very stable. How it works!Due to the offset outer contour or the overlap of the wheel lugs, a closed radius is created. This creates a closed radius You get perfect concentricity on hard surfaces such as a road without vibrations or shock loads on the driver and drive axles.The design of the wheels ensures a gentle crop flow of the forage from the knife bar right behind the wheels. Due to the geometry of the wheels, there is no wrapping the axles with food. The metal wheels 2.0 are designed in such a way that they clean themselves while driving. When mowing on soft ground, the wheel cleats engage in the ground. By immersing the driving lugs into the ground, the inner radius and the connecting struts are now the new running surface of the wheels. The controlled immersion of the driving lugs creates a uniform linear drive in which there is hardly any pulling to one side - regardless of whether it is on a slope or with uneven meadow vegetation.Another positive effect is the ground footprint that the driving lugs leave by immersing it in the ground. This footprint promotes water absorption on steep slopes. The metal wheel 2.0 Basic is suitable for motor mowers weighing up to 150kg. For heavier mowers, a wider version is recommended. In this case, please contact us or fill out the inquiry form available for download with the required technical data and send it to us. You will then receive a tailor-made offer for the right pair of metal wheels for your motor mower.Scope of delivery: 2 pieces of metal wheels

Feed mixer knife suitable for Himel in a smooth ground version. Diameter of the mounting holes 8mm.

The Mini loader bucket with perforated plate holder for farm loaders is suitable for universal use on any farm. Due to their similarity to light material shovels, the shovels offer a lot of volume despite their compact dimensions. Thanks to the wear plate under the shovel base and the scraper edge made of hardened steel 500 HB, the Mini loader shovels are very robust.Screwable perforated plate holderStable scraper edge made of hardened steel 500 HBWear plate under the blade base Scope of delivery: as shown, without mounting bracket

The Mini multi-grab bucket with perforated plate holder for yard loaders is suitable for loading loose or bulky loads. Loading and transporting manure, loose straw, green waste or shrub cuttings can be carried out without causing major contamination of the transport route. The screwed side panels also prevent loss of loads. The robust design with a blade plate thickness of 6mm, skids under the blade base and a cross tube on the top edge ensures high stability and a long service life.favorable center of gravity close to the carrier vehicleSliding skids on the bottom of the shovelScraping edge made of hardened steel 500 HBThick-walled side plates, 10mm thickScope of delivery: complete with hydraulic hoses and connectors BG3, screwed-in side plate, without recording consoles.

The Mini silage tongs with perforated plate holder for farm loaders are often used as a universal work tool due to their robust design. The tongs enable you to hold and tear out silage and manure. The silage tongs are ideal for transporting manure, straw, green waste and shrub cuttings.favorable center of gravity close to the carrier vehiclewear plate under the lower tine carrierscrewable forged tines at the bottom, length 800mmthick-walled side plates Scope of delivery: complete with hydraulic hoses and BG3 connectors, without mounting consoles.

​Mixer wagon blade suitable for Kuhn EUROMIX I series. The blade has a thickness of 8 mm.Excellent and tested quality

Mixing wagon knife long version suitable for Strautmann with 8mm thickness. Excellent and tested quality!

Mixing wagon knife short version suitable for Strautmann with 8mm thickness. Excellent and tested quality!