Agricultural machinery spare parts

Mower blade for finger bar Vogel & Noot Plus mower. The mower blade has a length of 140 cm with 18 blades. There are 4 guide blades GB543 on the 3rd, 7th, 12th and 16th blade. The hole spacing of the M8 mounting holes is 101 mm.

Mower knife with 28 blades suitable for ESM municipal cutter bar with replaceable bottom knife.The knife head is attached to the knife with 2 M8 screws at a distance of 152.4mm.There are 6 pin holders on the mower knife to accommodate the rocker arms.The pin supports are positioned over 2nd/3rd, 6th/7th, 10th/11th, 18th/19th, 22nd/23rd, 26th/ 27. Blade.

19 blades DIN 75, 4 cleaning plates AM23328/2 on 7th/8th. Blade, 5 outer blades on the right and left with sunk rivets at the top, driver plate 46092/1, 2 threaded holes M8, LA = 101 mm

19 blades DIN 75, 6 cleaning plates AM23328/2 on 2nd, 5th, 8th, 12th, 15th and 18th blade, driver plate 46092/1, 2 threaded holes M8, LA=101 mm

Mower blade with 29 blades suitable for ESM municipal cutter bars. The cutter head is attached to the blade with 2 M8x18 bolts at a distance of 101.6 mm. There are 6 pivot brackets on the cutter bar to hold the rocker arms. The pivot supports are positioned between the 2nd and 3rd, 7th and 8th, 11th and 12th, 18th and 19th, 22nd and 23rd and 27th and 28th blades.

31 blades 59015, 6 guide bars, B590.59032

Mower blade suitable for BCS mowers and for AEBI and Reform mowers fitted with BCS cutter bars. The mower blade has 31 blades (563.50696) and 6 guide strips (563.59061). The guide strips are riveted onto the blade at the 2nd/3rd, 7th/8th, 12th/13th, 19th/20th, 24th/25th and 29th/30th blades. The cutter head is secured to the toothed drive plate with 2 M8 screws. The hole spacing is 76 mm.

Mower blade suitable for Aebi cutter bars with additional cutting unit on the left and right side. The cutter bar has 21 DIN 75 blades with 4 cleaning plates AM8731/2. The cleaning plates are riveted onto the 8th, 9th, 13th and 14th blade. The rivets for the counter-blade of the additional cutting unit are ground on the left and right of 5 blades each. The cutter head is clamped onto the AM8880/1 drive plate. Austrian quality product

The mower blade for the Rapid finger bar has 21 blades. There are 6 cleaning plates 14902 riveted onto the blades. The cleaning plates are fitted over the 2nd, 5th, 8th, 14th, 17th and 20th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 122.5 mm. The cutter head is attached to the mower blade in these threaded holes. 

The mower blade for the Rapid finger bar has 21 blades. There are 8 cleaning plates 14902 riveted onto the blades. The cleaning plates are fitted over the 2nd, 5th, 6th, 8th, 14th, 16th, 17th and 20th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 122.5 mm. The cutter head is attached to the mower blade in these threaded holes. 

Mower blade suitable for Steyr original Phantom cutter bars. The mower blade has 21 blades and is supplied complete with the cutter head 192720212.21 blades 192720252 serrated, 1 spring plate 192720295, 1 cutter head 192720212Austrian quality product

23 blades DIN75, 2 cleaning plates AM8731/2

18 blades DIN 80, 5 cleaning plates 1800 720 018, 1 knife head 180a 720056

25 blades DIN 75, 6 cleaning plates AM8731/2

25 blades DIN 80, 6 blades DIN 80 recessed at the top, 4 cleaning plates

Mower blade suitable for Steyr original Phantom cutter bars. The mower blade has 25 blades and is supplied complete with the cutter head 192720212.25 blades 192720252 serrated, 1 spring plate 192720295, 1 cutter head 192720212Austrian quality product

Upper knife 30 blades, including 6 mushroom blades

Bottom knife 31 blades, including 5 mushroom blades and 1 end blade

33 blades DIN 75, 6 cleaning plates AM8731/2

Mowing blade suitable for Steyr original cutter bars. The mowing knife has 20 blades DIN 80 with 5 cleaning plates 1800720018. The cleaning plates are riveted on the 4th, 7th, 11th, 15th and 19th blade, starting from the knife head. The knife head blade is not counted as a blade. The knife head 180a720056 is made of malleable cast iron.Austrian quality product

Mower blade suitable for Busatis-Gebusa cutter bar BK 001, BK 003, BK 004, BK 006, BK 007, BK 008, BK 009, BK 015 and BK 016. The mower blade has 20 blades DIN 80. Of these, 5 blades are guide blades GB 543. The guide blades are the 5th, 9th, 13th, 17th and 19th blades starting from the knife head. The knife head blade is not counted as a blade.Austrian quality product

15 serrated blades, 4 guide rails, B590.48928.0

Mower blade with 18 blades suitable for ESM universal bar SC with hinged blade holder. The cutter head is attached to the blade with 2 M8 bolts at a distance of 101.6 mm. The cutter head attachment is from the centre. There are 4 guide rails on the mower blade. Guide rails are attached to the cutter blade. The guide rails are positioned over the 1st/2nd, 5th/6th, 13th/14th and 17th/18th blades. 

Mower blade ESM 92cm 18 blades for universal bar C. 2 threaded holes M8 with hole spacing 101.6mm and 4 guide strips above 1. &~ 2nd blade, 6th &~ 7th Blade, 12th &~ 13th Blade and 17th &~ 18. Blade. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.