Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb
€0.00Test

Agricultural machinery spare parts

Drive shafts & spare parts

Mower spare parts

Teejet precision farming

Combine harvester parts

Sweeping brushes & accessories

Liquid manure

Hay tines & spare parts

Field sprayer parts

Attachments and accessories

Scraper floor parts & front loader tines

Soil cultivation

Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA6740
Schröckenfux Mower blade suitable for Bucher Record with oval holes, LA=152mm Mower blade suitable for Bucher Record with oval holes, LA=152mm

21 blades 150.05.400, 4 cleaning plates FS 964, 1 guide bar 150.05.400

€112.00*
#FA7882
Schröckenfux Mower blade suitable for Busatis with simple guide blades Mower blade suitable for Busatis with simple guide blades

24 blades, 18 of which are DIN 80, 6 guide blades GB 543

€199.00*
#FA75230
Schröckenfux Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1 Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1

18 blades N336 + 4 guide blades F336R = 22 Kl.

€298.00*
-19 %
#FA58589
Schröckenfux Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1 Mower blade suitable for M�rtl High-Florett (fully hydraulic drive) with cutter head NY535/1

19 blades N336 + 5 guide blades F336R = 24 Kl.

€259.00* €319.00* (18.81% saved)
#FA7806
Schröckenfux Mower blade suitable for M�rtl UNI-Y&quot (fully hydraulic drive) with cutter head NY35 Mower blade suitable for M�rtl UNI-Y&quot (fully hydraulic drive) with cutter head NY35

23 blades N36/5 +5 guide blades N36/5R

€359.00*
#FA7899
Schröckenfux Mower blade suitable for STEYR T86, N180A, 182, 182A, without cleaning plates Mower blade suitable for STEYR T86, N180A, 182, 182A, without cleaning plates

18 blades DIN 80, 1 knife head 180a 720056.

€165.00*
#FA41362
Schröckenfux Mower blade suitable for Vogel and Noot motor mower RN light II, III, Alpin, Alpinist with nose screw, hole spacing 106mm Mower blade suitable for Vogel and Noot motor mower RN light II, III, Alpin, Alpinist with nose screw, hole spacing 106mm

18 blades, 10 pieces DIN80. 8 guide blades GB543.

€119.00*
#FA7866
Schröckenfux Mower blade with M8 threaded holes, hole spacing 106 mm Mower blade with M8 threaded holes, hole spacing 106 mm

18 blades, 10 pieces DIN80. 8 guide blades GB543.

€119.00*
#FA16043
Schröckenfux Mower blades for Reform/BCS series 600 and 700 Mower blades for Reform/BCS series 600 and 700

17 blades, B590.43553.2

€41.90*
#FA16041
Schröckenfux Mower blades for Reform/BCS series 600 and 700 Mower blades for Reform/BCS series 600 and 700

15 blades, B590.43544.0

€39.00*
#FA7590
Schröckenfux Mower fingers Mower fingers

suitable for Steyr-Phantom

€27.00*
#FA7852
Schröckenfux Mowing blade 120cm, 16 blades DIN 80, instead of Agria 63-02-71 Mowing blade 120cm, 16 blades DIN 80, instead of Agria 63-02-71

Total number of blades 16 pieces, 11 blades DIN 80, 5 blades 60-02-09, 4 cleaning plates 50-03-10

€119.00*
#FA49043
Schröckenfux Mowing blade 130 cm, 17 blades, 2 threaded holes M8, hole spacing 152 mm to arrow cut bar T61, new design Mowing blade 130 cm, 17 blades, 2 threaded holes M8, hole spacing 152 mm to arrow cut bar T61, new design

17 DIN80 serrated blades, 4 cleaning plates, 1 reinforcement strip, H150.550.070

€89.00*
#FA131117
Mowing blade 250 cm, 33 blades, 6 cleaning plates, 2 threaded holes M8 LA=152 mm, instead of Bucher H150.191.940 Mowing blade 250 cm, 33 blades, 6 cleaning plates, 2 threaded holes M8 LA=152 mm, instead of Bucher H150.191.940

​The mowing blade for the Bucher T61 free-cut bar with double-sided free cut has 33 blades. Five blades on the left and five on the right are riveted with countersunk rivet heads so that the pointed blades of the counter blade lie flat against the mowing blades. Six cleaning plates are riveted to the blade with the blades. The cleaning plates are attached to the 6th, 10th, 14th, 20th, 24th and 28th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 152 mm. Between the 3rd and 4th cleaning plates there is a reinforcement strip on which the cutter head is mounted. The cutter head is screwed to the mower blade using the two M8 threaded holes.

€159.00*
#FA47042
Schröckenfux Mowing blade for Moty Gigant III with Bidux mower Mowing blade for Moty Gigant III with Bidux mower

Upper knife, 26 blades, including 5 mushroom blades 100345

€335.00*
#FA47043
Schröckenfux Mowing blade for Moty Gigant III with Bidux mower Mowing blade for Moty Gigant III with Bidux mower

Bottom knife, 26 blades, including 4 mushroom blades 100342

€335.00*
#FA47041
Schröckenfux Mowing blade for Moty Gigant III with Bidux mower Mowing blade for Moty Gigant III with Bidux mower

Bottom knife, 24 blades, including 4 mushroom blades

€325.00*
#FA47040
Schröckenfux Mowing blade for Moty Gigant III with Bidux mower Mowing blade for Moty Gigant III with Bidux mower

Upper knife, 24 blades, including 5 mushroom blades

€325.00*
#FA2215
Schröckenfux Mowing blade new version, medium cut, Rasant Nu�m�ller, red blade head Mowing blade new version, medium cut, Rasant Nu�m�ller, red blade head

Upper knife, 26 blades

€385.00*
#FA53098
Schröckenfux Mowing blade new version, medium cut, Rasant Nu�m�ller, red blade head Mowing blade new version, medium cut, Rasant Nu�m�ller, red blade head

Bottom knife, 26 blades

€375.00*
#FA33467
Schröckenfux Mowing blade suitable for Agria free-cutting bars Mowing blade suitable for Agria free-cutting bars

2 threaded holes M8, hole spacing 152 mm, 21 blades DIN75, 2 cleaning plates 259.0700

€169.00*
#FA41796
Schröckenfux Mowing blade suitable for M�rtl Uni-Rasant with knife head N35/1 Mowing blade suitable for M�rtl Uni-Rasant with knife head N35/1

27 blades (22 blades N36/5 +5 guide blades N36/5R)

€185.00*
#FA41797
Schröckenfux Mowing blade suitable for M�rtl Uni-Rasant with knife head N35/1 Mowing blade suitable for M�rtl Uni-Rasant with knife head N35/1

29 blades (24 blades N36/5 +5 guide blades N36/5R)

€194.00*
#FA41798
Schröckenfux Mowing blade suitable for Mörtl Uni-Rasant with knife head N35/1 Mowing blade suitable for Mörtl Uni-Rasant with knife head N35/1

32 blades (26 blades N36/5 +6 guide blades N36/5R)

€209.00*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.
- Imprint