Skip to main content Skip to search Skip to main navigation
Go to homepage
Siegel österreichischer Onlineshop Siegel 'Ausgezeichnet Einkaufen - Top Betrieb

Agricultural machinery spare parts


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

#FA25347
Sliding pin for 1 3/8 x 6 profile Sliding pin for 1 3/8 x 6 profile

Walterscheid, old version

€20.75*
#FA41829
Sliding sole Sliding sole

€54.90*
#FA7683
Sliding sole for inner shoe Sliding sole for inner shoe

€67.00*
#FA7706
Sliding sole for outer shoes Sliding sole for outer shoes

€92.00*
#1177
Slurry compressor MEC with gearbox and pressed lubrication Slurry compressor MEC with gearbox and pressed lubrication
Power max.: 4350 L/min Version: MEC 4000

Battioni &~ Pagani vacuum pumps of the MEC series with transmission gears. The drive takes place via a cardan shaft with a maximum speed of 600 rpm. The ideal working speed is between 400 and 500 rpm.The slurry compressors are equipped with pressed lubrication, in which the required amount of lubricating oil can be manually adjusted using a drip oiler. The drip oiler is included in the scope of delivery and is roughly adjusted to the performance of the compressor at the factory. The setting should definitely be checked during operation and, if necessary, readjusted according to the information in the operating instructions.The scope of delivery includes: ~ ~ ~PTO shaft protection ~  ~ ~Drip oiler ~ ~ ~Oil lines ~ ~ ~Operating and maintenance instructionsThe pressure relief valve is not included in the scope of delivery!

€1,525.00*
Variants from â‚¬1,295.00*
#7459
Slurry hose for drag hose distributor Slurry hose for drag hose distributor
Bending radius (mm): 155 Operating pressure (bar): 4,50 Thickness (mm): 3,70 Weight / m: 0,55 kg Ø inside (mm): 38

PVC suction and pressure hose with shockproof hard PVC spiral and smooth inner surface. Temperature range -25C to 55C. Vacuum up to 7m H2O water column. Color green, price per meter.

€11.00*
#53247
Frank Original Smooth coulter disc suitable for Kverneland Smooth coulter disc suitable for Kverneland
can be used instead of Kverneland: 56112 Ø: 450

Smooth coulter disc suitable for Kverneland from European production. With 3 holes for attachment to the six-disc bearing. The hole circle diameter is 80mm and the center hole has a diameter of 55.5mm.

€59.90*
#FA40066
Socket � 12 x � 20 x 25 mm Socket � 12 x � 20 x 25 mm

€1.49*
#FA8871
Socket screw set M10x35 suitable for scraper floor chain 8x31, 9x31 Socket screw set M10x35 suitable for scraper floor chain 8x31, 9x31

Socket screw set M10x35 suitable for scraper floor chain 8x31, 9x31. The chain screw set consists of a chain screw, pressure piece and lock nut.

€3.79*
#FA2947
Socket screw set M10x40 suitable for scraper floor chain 10x31, 10x35, 10x38, 11x31, 11x35 Socket screw set M10x40 suitable for scraper floor chain 10x31, 10x35, 10x38, 11x31, 11x35

Socket screw set M10x40 suitable for scraper floor chain 10x31, 10x35, 10x38, 11x31, 11x35. The chain screw set consists of a chain screw, pressure piece and lock nut.

€3.79*
#FA110608
Socket screw set M10x40 suitable for scraper floor chain 8x31, 9x31 Socket screw set M10x40 suitable for scraper floor chain 8x31, 9x31

Socket screw set M10x40 suitable for scraper floor chain 8x31, 9x31. The chain screw set consists of a chain screw, pressure piece and lock nut.

€3.49*
#FA32088
Socket screw set M10x48 suitable for scraper floor chain 9x27, 9.5x27, 10x28 Socket screw set M10x48 suitable for scraper floor chain 9x27, 9.5x27, 10x28

Socket screw set M10x48 suitable for scraper floor chain 9x27, 9.5x27, 10x28. Suitable for loading wagons and spreaders from Bergmann. The chain screw set consists of a chain screw, pressure piece and lock nut.

€4.49*
#FA8872
Socket screw set M8x39 suitable for scraper floor chain 7x22, 8x24, 9.26x26, 10x26.5 Socket screw set M8x39 suitable for scraper floor chain 7x22, 8x24, 9.26x26, 10x26.5

Socket screw set M8x39 suitable for scraper floor chain 7x22, 8x24, 9.26x26, 10x26.5. The chain screw set consists of a chain screw, pressure piece and lock nut.

€3.19*
#FA52036
Spacer disc � 19x30x3 mm Spacer disc � 19x30x3 mm

€1.39*
#FA109855
Spacer for flail knife 14x28x3mm Spacer for flail knife 14x28x3mm

Spacer for attaching flail knives to mulchers and flail choppers

€0.49*
#FA7742
Spacer plate Spacer plate

€7.00*
#FA116222
ESM Special nut Busatis M10 Special nut Busatis M10

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

€15.99*
#53068
ESM Special nut Busatis M12, length 28,5 mm Special nut Busatis M12, length 28,5 mm
Length (mm): 28 can be used instead of Busatis: GB1644, 3800.279.01 can be used instead of ESM: 324.5020 can be used instead of Nussmüller Rasant: 48754N

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

€17.90*
#17568
Spiral hose SL in PVC Spiral hose SL in PVC
Operating pressure (bar): 4,0 Ø inside (mm): 76 Ø outside (mm): 85,2

PVC suction and pressure hose with shockproof and rigid PVC spiral. Suitable for liquids in the area of slurry technology, irrigation systems and wastewater technology.In slurry technology, this hose is used as a connecting hose between the compressor, siphon and overflow valve.The spiral hose can be used in a temperature range of -10 C to +60C and has a vacuum resistance of 0.6bar.

€19.40*
Variants from â‚¬14.50*
#FA9405
Spiral hose SL in PVC Spiral hose SL in PVC

PVC suction and pressure hose with shockproof and rigid PVC spiral. Suitable for liquids in the area of slurry technology, irrigation systems and wastewater technology.In slurry technology, this hose is used as a connecting hose between the compressor, siphon and overflow valve.The spiral hose can be used in a temperature range of -10 C to +60C and has a vacuum resistance of 0.6bar.

€11.60*
#53390
Spray nozzle with ball connection Spray nozzle with ball connection
D (mm): 150 Nominal size: DN120

Without baffle plate.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm

€42.90*
Variants from â‚¬37.90*
#15996
Spray nozzle with ball, galvanized Spray nozzle with ball, galvanized
D (mm): 158 Nominal size: HK133

3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

€97.00*
Variants from â‚¬70.90*
#FA7726
spring plate spring plate

€1.29*
#FA10942
ESM Spring plate bidux system Spring plate bidux system

€4.39*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.