Agricultural machinery spare parts

Top knive for double knife bar Busatis with a total number of 22 blades. Of these, 5 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Moty Gigant motorised mowers with Busatis double blade mower. Overall length with cutterhead: 166 cm Length of cutter back: 166 cm Cutter head on the left in the direction of travel, offset 25 mm inwardsCutterhead length: 207 mm Total number of blades: 22, of which 5 blades with knobPosition of the blades with knob starting from the cutterhead: 3rd, 7th, 12th, 17th and 20th blade Blade pitch (blade centre to blade centre): 76 mm

​Top knive for double knife bar Busatis with a total number of 23 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Bucher and Reform Kombi M12 motorised mowers with Busatis double blade mower. Overall length with cutterhead: 179 cm Length of cutter back: 173 cm Cutter head on the left in the direction of travel, 56 mm projection over the back of the blade Cutterhead length: 232 mm Total number of blades: 23, of which 4 blades with knobPosition of the blades with knob starting from the cutterhead: 2nd, 8th, 15th and 21st blade Blade pitch (blade centre to blade centre): 76 mm

​Top knive for double knife bar Busatis with a total number of 23 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76,2 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Suitable for Nussmüller-Rasant Junior 90 motorised mowers with Busatis double blade mower.Cutting width: 167 cm Overall length with cutterhead: 176 cm Length of cutter back: 173 cm Cutter head on the left in the direction of travel, 30 mm projection over the back of the blade Cutterhead length: 290 mm Total number of blades: 23, of which 4 blades with knobPosition of the blades with knob starting from the cutterhead: 3rd, 9th, 15th and 21st blade Blade pitch (blade centre to blade centre): 76,2 mm

Top knive for double knife bar bidux with a total number of 27 blades. Of these, 5 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted upper cutter head, on the left-hand side when viewed in the direction of travel. Upper knife, 27 blades, 5 blades with knobTotal length with knife head: 1967 mmLength of knife back: 1880 mmKnife head 5840.040.01, 345.0550Protrusion of knife head over knife back: 90 mmLength of knife head: 400 mmTang cutter head: 18 mmPosition of the blades with knob starting from the cutter head: 3rd, 9th,15th, 21th and 26th. bladeBlade pitch (blade center to blade center): 70 mm

Top knife for the bidux double-blade bar system, with a total of 27 blades. Of these, 5 are blades with knob for mounting the blade guide arms. The spacing between the centres of the blades is 70 mm. The knife is supplied complete with the riveted upper blade head, located on the left-hand side when viewed in the direction of travel.Suitable for the Nussmüller-Rasant with bidux double-blade mower.Total length including blade head: 195 cmLength of blade backs: 189 cmBlade head on the left-hand side when viewed in the direction of travel, offset 68 mm outwards; blade head length: 380 mmTotal number of blades: 27, of which 5 are blades with knob, position of the blades with knob relative to the blade head: 3rd, 9th, 15th, 21th and 25th bladesBlade spacing (centre to centre): 70 mm

​Top knife for the bidux ESM double-blade bar, compatible with Aebi, IBEX and Köppl, with a total of 29 blades. Five of these are blades with knob for attaching the knife guide arms. The spacing between the centres of the blades is 70 mm. The knive is supplied without the blade head, which is screwed onto the left-hand side when viewed in the direction of travel. The upper-knive-head is secured with 3 M8 fixing screws. The blades with knob are positioned at the 3rd, 9th, 15th, 21st and 27th blades.

Top knife for the bidux double-blade bar system, with a total of 32 blades. Of these, 6 are blades with knob for mounting the blade guide arms. The spacing between the centres of the blades is 70 mm. The knife is supplied complete with the riveted upper blade head, located on the left-hand side when viewed in the direction of travel.Suitable for the Nussmüller-Rasant with bidux double-blade mower.Total length including blade head: 230 cmLength of blade backs: 223 cmBlade head on the left-hand side when viewed in the direction of travel, offset 68 mm outwards; blade head length: 380 mmTotal number of blades: 32, of which 6 are blades with knob, position of the blades with knob relative to the blade head: 3rd, 9th, 15th, 22nd, 26th and 31st bladesBlade spacing (centre to centre): 70 mm

The track loosener with a material thickness of 32x12mm comes complete with a rotating coulter. For heavy-duty use, the tines can be retrofitted with a reinforcement spring. These can be found under accessories below.

The track loosener with a material thickness of 40x10mm comes complete with a rotating coulter. For heavy-duty use, the tines can be retrofitted with a reinforcement spring. These can be found under accessories below.

Without reinforcement spring, material 32x10 mm. Total length 570 mm.

Without reinforcement spring, material 40x10 mm. Total length 785 mm.

Transition from ball Italian system to Storz coupling. For coupling fire hoses or irrigation hoses to manure tanks with Storz couplings on the existing cup connection with hooks.

Transition from Bauer ball system to Storz coupling. For coupling fire hoses or irrigation hoses to manure tanks with Storz couplings on the existing cup connection.Galvanized version.3 inch = HK76, ball outside diameter D = 98 mm4 inch = HK108, ball outside diameter D = 145 mm5 inch = HK133, ball outside diameter D = 158 mm6 inch = HK159, ball outside diameter D = 180 mm8 inch = HK194, ball outside diameter D = 230 mm

Transition from the Perrot ball system to the Storz coupling. For coupling fire hoses or irrigation hoses to manure tanks with Storz couplings on the existing cup connection.

Transition from BecherItalian system to Storz clutch. For coupling fire hoses or irrigation hoses to manure tanks with Storz couplings on the existing ball connection.

For tool-free attachment to a mounting triangle or the cultivator bracket. The device triangle is attached to the spreader with 4 screws.

3-way nozzle body for quick changing of nozzles of different sizes/spraying characteristics.Stop position between the spraying positions.ChemSaver membrane check valve for drip-free shut-off. Standard diaphragm opens at 0.7 bar. Membranes made of EPDM as standard, optionally made of Viton.Maximum operating pressure 10 bar.1/2"~ and 3/4"~ Versions with a hexagon socket in the top clamp for attachment to flat surfaces and rod profiles.Mounting via a 9.5 mm hole in the pipe.Maximum flow 6.1 l/min at 0.34 bar pressure drop, 8.6 l/ min at 0.69 bar pressure drop.

Application: surface spraying, liquid fertilization110 nominal spray angle, injector technology, flat spray pattern, hybrid of the patented TT Turbo TeeJet and AI injector nozzle.Patented design with large, round free cross sections minimizes the risk of clogging.Thanks to the injector principle Larger drops are generated, and depending on the preparation, air pockets are also possible.Construction made of plastic for very good chemical resistance and high wear resistance.Removable injector insert.Drift reduction excellent, JKI -loss-reducingPressure range 1-7 bar, optimal pressure in terms of effect 3-7 bar.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66757

​Are you looking for a completely reliable solution for professional drinking water supply? Our drinking water hose, featuring a tear-resistant polyester fabric lining embedded in an inner and outer layer of high-quality thermoplastic polyurethane (PU), combines extreme durability with uncompromising hygiene. Fitted with robust Storz couplings, this hose is ready for immediate use in demanding, continuous operation.Areas of application:    Drinking water supply    Drinking water transfer hose    Emergency supply hoseAdvantages:    Extremely pressure-resistant: With a maximum operating pressure of 17 bar, this hose effortlessly withstands even severe pressure surges and intense stresses.    Top-quality material: Manufactured from modern polyurethane (PU). This makes the hose not only extremely light and flexible, but also highly abrasion-resistant, UV-resistant and durable.    Easy to clean and disinfect thanks to the very smooth inner surface    100% safe for drinking water: The inner material is completely tasteless, odourless and certified for the transport of clean drinking water (complies with all current KTW and DVGW guidelines).    Quick connection: The factory-fitted Storz couplings guarantee a connection in a matter of seconds – drip-free and absolutely secure – in the blink of an eye.

suitable for stripping tine order no. 54480

suitable for stripping tine order no. 54480

The U-nut with M16x1.5mm thread and hole spacing of 50mm is used to fasten rotary harrow tines. Using the U-nut reduces the time required and simplifies the assembly and disassembly of the rotary harrow tines.