Agricultural machinery spare parts

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Bottom knife, 27 blades, 5 of which are mushroom blades

Washer M10 in material thickness 3.0mm

Washer M12 with a material thickness of 3.5mm

These specially coated papers are used to evaluate liquid distribution, degree of coverage, droplet density and penetration in plants. Water-sensitive paper is yellow and turns blue when water-containing splash drops hit it. The water and oil sensitive papers sold by FAIE are manufactured by Syngenta Crop Protection AG.

These specially coated papers are used to evaluate liquid distribution, degree of coverage, droplet density and penetration in plants. Water-sensitive paper is yellow and turns blue when water-containing splash drops hit it. The water and oil sensitive papers sold by FAIE are manufactured by Syngenta Crop Protection AG.

​Wear plate for ESM cutterhead for mower blade drive via a sliding block with an edge length of 38x38mm. The plate is attached to the inside of the cutterhead with 2 pcs. M6 screws on the inside of the cutterhead. When replacing, both wear plates should always be replaced at the same time. Delivery per piece!

With the perforated plate (LP) holder, all common front loaders, wheel loaders, telescopic or yard loaders can be combined with our attachments.We supply the attachments at the factory with two firmly welded perforated plates. The specific mounts for the carrier vehicles are simply screwed to these. When ordering a corresponding attachment, please specify the type of relevant telescopic, yard or wheel loader.Suitable for Weidemann Hoftrac and wheel loaders, Wacker-Neuson wheel loadersDelivery: 1 pair and screw set

for welding, 40.2x38x322 mm, 1 pair

To Zinken 17706, 18597

To Zinken 18596, 7275, 7277, 15062

To Zinken 15062, 7275, 7277, 18596

suitable for order no. 52037, 61002, 52038

​Welding plate for GripCut 150 tree felling grapple.Simply weld the mounting bracket that fits your excavator, telescopic loader or farm loader to the plate, then bolt the plate to the GripCut 150 tree felling grapple. Plate with matching holes (without bolts)

The forks, forged from alloy steel in one piece in the bridge and centering pin, are thermally treated. The central part consists of two thermally treated flange forks welded together and carries the two forks with bridge and centering pin and the guide disk sliding between them. The safety quick release on the outer fork is standard.

Length 450 mm, width 100 mmHole spacing 45-80 mm.