E-Teile zu Stihl

DIN 73379, for the promotion of commercial fuels and fuel mixtures up to a maximum of 50% benzene content, diesel fuels (gas oil), water, air and heating oil EL. ~Price per meter and including cutting service. Soul : NBR, braiding: vulcanized yarn, temperature range: -30C to +80C (for benzene +70C), operating pressure: 7 bar.

Petrol hose, transparent, also suitable for winter use, does not harden, has an airtight seal with the connection, suitable for many engine devices. Not suitable for special fuels containing ethanol or alkylate gasoline.Price per meter and including cutting service

​Ignition coil suitable for STIHL models: 009, 010, 011, 012, 020 (1114), 020 (1129), 020T (1129), 021, 023, 025, FR160, FR220, FS160, FS180, FS200, FS220, FS220K, FS280, FS280K, FS290, MS200, MS200T, MS210, MS210C, MS230, MS230C, MS240, MS250, MS250C, MS251, MS280, MS280K, MS290. Can be used instead of: 0000 400 1306, 0000-400-1306, 00004001306. Cable length from the coil to the spark plug connector: 195mm.

Electronic ignition coil suitable for Stihl machines!Replica suitable for the models:024, 026, 028, 029, 034, 036, 036QS, 038, 039, 044, 046, 048, 064, ~MS240, MS260, MS290, MS310, MS340, MS360, MS360C, MS380, MS381, MS390, MS440, MS640, ~FS360, FS420, FS420L ~Replaces original STIHL: 0000-400-1300, 1119-400-1308, 1122-400-1311, 00004001300, 11194001308, 1122400131

​Electronic ignition coil suitable for Stihl machines! Replica suitable for the models:FS: 120, 200, 250, 300, 350FR: 350, FR450,BT: 120, BT121,HT: 250,Replaces original STIHL: 4134 400 1301, 4134 400 1306, 41344001301, 41344001306, 4134-400-1306, 4134-400-1301

​Electronic ignition coil suitable for Stihl machines! Replica ignition module suitable for the models: FS 160, FS 180, FS 200, FS 220, FS 220K, FS 280, FS 290,  FR 160. FR 220,                                           SR 340, SR 420,                                           BR 340, BR 380, BR 420                                      Replaces original STIHL: 0000-400-1306, 00004001306, 4203-400-1301, 42034001301 ,ATTENTION: specific for brushcutters! NOT for chainsaws!Translated with DeepL.com (free version)

​Worm gear for oil pump suitable for Stihl chainsaws!Replica suitable for Stihl models: 017, 018, 019, 019T, 021, 023, 025,     MS170, MS171, MS180, MS181, MS190, MS190T, MS191, MS191T,     MS210, MS211, MS230, MS231, MS250, MS251Replaces original Stihl: 1123-640-7101, 1123-640-7102, 1123-647-2400,     11236407101, 11236407102, 11236472400 (not an original part!).

​Oil pump suitable for Stihl chainsaws!Replica suitable for Stihl models: 017, 018, 019T, 021, 023, 025,  MS170, MS171, MS180, MS181, MS190T, MS191T, MS210, MS211, MS230, MS250  MSA: 60, 70, 120, 140, 160, 200, 220, 800,Replaces original Stihl: 1123-640-3200, 11236403200, 1123-640-3201, 11236403201 (not an original part!).

Tank cap for saw chain oil suitable for Stihl! ~Replica tank cap suitable for Stihl models: ~021, 023, 024, 025, 026, 034, 036, 036QS, ~MS171,MS171C, MS181 , MS181C, MS192C, MS192T, MS192TC, MS193C, MS193T, MS193TC, ~MS200,MS200T, MS210, MS210C, MS211, MS211C, MS230, MS230C, MS231, MS231C, MS240,MS241C, ~< br>MS250 , MS250C, MS251, MS251C, MS260, MS261, MS261C, MS340, MS360,MS360C, ~HT, HT56C-E, HT70, HT75, HT100, HT101, HT130, HT131, HTE60, HT-KM Replaces original Stihl No.: 0000-350-0526, 0000-350-0537 , 00003500526,00003500537 ~not an original part!

Suction filter for 6 mm hose, plastic with sieve, diameter 20mm, length 40mm

​Reproduction starter role, pulley for starter cable, cable pulley for chainsaw starter.Suitable for Stihl: 015, 017, 018, 019T, 020, 020T, 021, 023, 024, 025, 026, 028, 034,  MS170, MS180, MS190T, MS192T, MS200, MS200T, MS210, MS210C, MS230, MS230C, MS250, MS250C, MS260, MS81T, BG45, BG46, BG55, BG65, BG85, BR45C, BT45,  HS45, HS81R, HS86R, HS86T,  SH55, SH55C, SH85, SH85Ccan be used instead of Stihl no.: 1125 195 0400, 11251950400, 1125 195 0401, 11251950401, 1125 195 0407, 11251950407.Dimensions: outer diameter 67.2 mm, inner diameter 10.5 mm. 

​Reproduction starter role, pulley for starter cable, cable pulley for chainsaw starter.Suitable for Stihl: 029, 034, 036, 036QS, 039, 044, 046, MS261, MS290, MS310, MS340, MS341, MS360, MS361, MS362, MS390, MS440, MS441, MS460, MS462,Can be used instead of Stihl no.: 1128 195 0400, 11281950400Dimensions: outer diameter 67 mm, inner diameter 10.5 mm. 

​Starter spring, starter cover spring, return spring for starter mechanism, suitable for the following Stihl models: MS261, MS261C, MS271, MS271C, MS291, MS291C, MS311, MS341,   MS361, MS361C, MS362, MS362C, MS382, MS391, MS441, MS441C, MS461, MS661, MS661C, GS461. Replaces original Stihl: 1135 190 0600, 11351900600, 1135-190-0600

​Reproduction clutch bell with drive pinion and needle bearing. Pitch 3/8 inch Hobby / Picco / LowProfile, 6 teeth, suitable for STIHL: 017, 018, 019, 019T, 021, 023, 025, MS170, MS180, MS190,MS191, MS192, 192CE, MS210, MS211, MS230, MS250,can be used instead of: 1143 640 2000Dimensions: Diameter 66 mm, drum height. 17.8 mm,Inner diameter of needle bearings 11.5 mm.

​Reproduction clutch bell with drive pinion and needle bearing. Pitch 325 inch, 7 teeth, suitable for STIHL: 024, 026, MS240, MS260, MS261, MS270, MS271, MS280, MS280, MS281, MS290, MS291,                         can be used with: 1141 007 1002, 1141 640 2001,Dimensions: Diameter 69 mm, drum height. 19 mm,Inner diameter of needle bearings 11.2 mm.

​Reproduction manual starter, starter complete with starter handle, spring and pulley.Fan housing with starting device suitable for Stihl 021, 023, 025, MS 210, MS 230, MS 250, can be used instead of Stihl no.: 1123 080 1802, 11230801802, 1123 080 2104, 11230802104,

​Reproduction manual starter, starter complete with starter handle, spring and pulley.Fan housing with starting device suitable for Stihl 024, 026, MS 240, MS 260can be used instead of Stihl no.: 1121 080 2100, 11210802100, 1121 080 2101, 11210802101, 

​Reproduction manual starter, starter complete with starter handle, spring and pulley.Fan housing with starting device suitable for Stihl 044, 046, MS 440, MS 460can be used instead of Stihl no.: 1128 080 2100, 11280802100, 1128 080 2102, 11280802102, 1128 080 2104, 11280802104

This starter latch for STIHL chainsaws ensures that the recoil starter engages securely and helps to ensure reliable engine start-up. As a precise replacement for the original part 1125-195-7200, it is suitable for numerous STIHL models, including the 026 and MS260. Its compact design allows for quick replacement and restores the start system to full working order. Advantages & Features • Precision-fit replacement – replaces original part 1125-195-7200 for easy fitting • Reliable power transmission – engages securely with the pulley and assists in starting the engine • Wide compatibility – suitable for many STIHL chainsaws, brush cutters and hedge trimmer models Frequently Asked Questions Which models is the starter pawl suitable for? Suitable for numerous STIHL models such as 009, 010, 011, 012, 019, 021, 023, 024, 025, 026, 028, 034, 036, 044, 060, MS170, MS192T, MS200, MS200T, MS210, MS210C, MS230, MS231, MS250, MS250C, MS260, MS290, MS310, MS341, MS390, MS440, MS460, HS45, and many more. When should the starter pawl be replaced? If the pull cord slips or the engine no longer starts reliably, the pawl is often worn. Is the starter pawl an original part? The starter pawl replaces the original STIHL part 1125-195-7200 and is designed as a precisely fitting replacement part.

This starter pawl for the STIHL FS 240 engages reliably with the starter mechanism and ensures the engine starts safely, even with frequent use. As a replacement for the original part 0000 195 7200, it is ideal for repairing worn starter units. Advantages & Features • Precision-fit replacement – replaces original part 0000 195 7200 for easy fitting • Reliable power transmission – engages with the starter system when the cord is pulled, ensuring a safe engine start • Robust design – suitable for regular use on brush cutters Frequently Asked Questions Which machine is the starter pawl suitable for? It is suitable for the STIHL FS 240, amongst others, and replaces the original part number 0000 195 7200. What is the function of the starter pawl? During the starting process, it briefly connects the starter to the engine, enabling the engine to turn over. When should the starter pawl be replaced? If the starter slips or the engine no longer turns over reliably despite the rope being pulled.Replaces Stihl part numbers: 0000-195-7200, 00001957200Compatible with Stihl: BT120C, BT121, BR320, BR320L, BR340, BR340L, BR380, BR400, BR420, BR500, BR550, BR600, FR220, FR350, FR410C, FR460TC, FR450, FR480, FS120, FS160, FS180, FS200, FS240, FS250, FS260, FS300, FS350, FS360C, FS400, FS410C, FS450, FS460C, FS480, FS490C, FS500, FS510C, FS550, FS550L, FS560C, TS400, TS410, TS420, TS480i, TS500i

Original carburettor sealing set, membrane set, suitable for Stihl MS 311, MS 362, MS 362-VW, MS 362 CBfor carburettor: WTE-16, WTE-9, WTE-17, WTE-8, WTE-18, WTE-20Stihl No.: 1140 007 1004, 11400071004,

Original carburettor sealing set, membrane set, suitable for Stihl MS 362, MS 362 CM, MS 400, MS 400 CMfor carburettor: 1140/16, 1140/15, 1140/13Stihl No. : 1140 007 1703, 11400071703,

​Original Stihl blade nut, suitable for many Stihl machines, internal thread M 8x1.25, external 19 mm wrench size,suitable for Stihl: 09, 011, 012, 024, 028, 034, 035, 036, 037, 038, 039, 041, 042, 043, 044, ...Can be used instead of Stihl no., comparison number: 00000-955-0801, 0000-955-0804,  1123-664-2400, 00009550801, 00009550804, 11236642400     

The Stihl speed measuring device EDT 9 is important for adjustment work on motor devices. They precisely measure the maximum speed of the device and can adjust settings. To measure, the alligator clip is simply clamped to the ignition cable. Alternatively, a measurement can be carried out using the supplied antenna.Battery operated, dimensions 3.5 x 5.5 x 1.5 cm without cable, weight 30 gTachometer for motor devicesMeasurement via Alligator clip or antenna up to 16000 rpm