Troughs, watering troughs & hayracks
Hose nozzle stainless steel 1/2” AG
Hose nozzle 15 mm made of stainless steel. 1/2’ external thread
Lever ST7
Gunmetal pressure tongue, compatible with Lister ST7 bite drinkerLister original spare part number 09-0097002 (No. 2 on the spare parts diagram)
Lid for feeding bowl 6 l
matching white plastic lid for the food bowls order no. 26425, 106881, 106882. 31.5 cm.
Long feed trough for sheep and goats
Ideal for hanging in plug-in shelves (sheep panels) or other fixtures up to 50 mm thick95 x 21 x 12 cm (WxDxH). Capacity 9 liters. Trough depth without suspension bracket 14.5 cm. With feeding grid for controlled feed intake throughout the herd. Made of black plastic. Ideal for hanging in plug-in flocks (sheep panels) or other fixtures up to 50 mm thick
Mother ST7
M4 brass nut, compatible with Lister ST7 bite drinkers.Lister original spare part number 9004000034061 (No. 8 on the parts diagram)
O-ring St7
Rubber seal, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105009 (No. 9 on the parts diagram)
Piglet bowl stainless steel
Stainless steel feeding bowl for piglets in the farrowing pen. 25 cm in diameter.With tension hooks for attachment to all standard slatted floors.
Piglet drinking bowl
Made of full stainless steel with 1/2" IT connection. Suitable for piglets up to 15 kg. Ideal for learning as the water collects at the front edge of the pool. Valve runs very smoothly and is easy to reach. H x W: 120 x 110 mm
Piglet feeder
TR-5 plastic automatic feeder for piglets.Convenient, precise feed control in 12 positions, even with a full hopper.The internal scraper system allows for ideal feed dosing or even complete shutoff.With stainless steel bite protection edge.Hygienic and easy to clean, as there are no corners where feed can get trapped.Dimensions: 80.5 x 30 x 70 cm (L x D x H)
Piglet feeder, 5 l
Ideal for feeding, complete with wall bracket, capacity 5 liters, dimensions 300x400x160 mm. Weight: 1.3kg
Plastic wall fitting
For feeding bowl order no. 37981, with screw and nut. For easy hanging, height adjustable.
Pool drinking mast
With this pool there is hardly any water loss because the water collects in the right side of the pool. Suitable for fattening. Fully stainless steel with 1/2" IT connection. H x W: 309 x 202 mm
Sow trough with biting edge, 9 l
Made of plastic and stainless steel, in optimal quality. No sharp edges or corners and therefore no risk of injury. This also means minimal voids between plastic and stainless steel and therefore optimal hygiene. The trough is used in waiting and free stalls, but can also be used in farrowing stalls.Advantages:Using an individual trough per sow prevents sows from stealing feed from each other The raised sides of the trough and the narrow opening reduce food loss Integrated stainless steel biting edge on the offset front edge protects the trough from bites No leftover food due to the shape li>Dimensions (H x W x D): 37 x 34 x 32 cmHeight at front to biting edge: 15 cm
ST7 cylinder screw
M4x35mm stainless steel screw, compatible with Lister ST7 bite watererLister original spare part number 9004003301081 (No. 11 on the spare parts diagram)
ST7 stop nut
Stainless steel M4 locking nut, compatible with Lister ST7 bite waterer.Lister original spare part number 9004000047081 (No. 12 on the spare parts diagram)
Stainless steel feeding bowl
Universally applicable feeding bowl made of stainless steel. The material is particularly robust and hygienic and therefore ideal for use in stables. 30cm, contents 5.5l Alternatively, it is ideal as a wax bowl.
Stainless steel feeding trough
Fully stainless steel and therefore hygienic and easy to clean. For raising piglets. With 8 feeding places and a lying barrier, two tension hooks for quick assembly. Length: 100cm.
Stainless steel straw rack
Made of stainless steel, with very small bar spacing for as little feed loss as possible. For mounting on the wall, very good quality and workmanship!Dimensions: H x W x D: 61.5 x 38.8 x 26.0 cmInside bar spacing: 18 mm
Stainless steel tube 1/2
With two welded stainless steel holders and a 1/2? drinking outlet, bent at 30,
Straw machine
Straw rack for species-appropriate pig farming, but also suitable for calves, goats or sheep! Thanks to the integrated tray in the lower part of the rack, less straw or hay ends up on the floor or in the floor gaps. Width: 57 cm at the bottom, 65 cm at the top. Height: 65cm. Contents: 60 l.
Straw rack, 1 m
Rack for roughage, for sheep and goats, but also for calves or pigs. (W x D x H) 98 x 36 x 52 cm
tapping clamp
Made of stainless steel, for pipes of 3/4"~ to 1"~. With 1/2" connection thread.
Teething potion ST 7
Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g
Tilting trough for WaterLevel
Tipping trough suitable for WaterLevel valve. With fittings.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
