Measuring tools
Locksmith angle 200x130mm
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
Locksmith angle 250x160mm
made of steel machined on all sides for easy marking and straightening work galvanized stop corners exposed
Locksmith square with stop
Made of high-quality tool steel, machined on all sides, for marking and straightening work, galvanized, stop corners exposed.
Magnet spirit level 20 cm
Practical, compact spirit level with spirit level for horizontal, vertical and 45 measurements. Strong magnet ensures good adhesion to metal.
Magnetic roll meter 8m / 25mm
High-quality roll meter with magnetic end hook in a handy compact housing design. With precise band brake for precise internal measurements and robust steel belt clip for a secure hold. Thanks to the reinforced band beginning, lasting precision and protection against damage! Length 8m, bandwidth 25mm
Marking gauge
With flat slider, surface-hardened aluminum (HRc 62), black anodized easy-to-read laser marking with vernier 0.05 mm
Measure click
The problem solver and helper for clicking onto any standard wooden meter stick. Made of plastic. Color turquoise.Supplied without meter stick!
Multifunction angle RS 18
The try square is also called a rafter square, rafter square or speed square and has the shape of an isosceles right-angled triangle with a stop on a side. ~The variety of scales and recesses make the try square a multifunctional tool, which is ideal for marking lines and angles as well as as a scribing tool and saw guide. The try square from SOLA combines the functions of a ruler, try square, miter square, protractor, marking aid, saw guide and rafter knife.The rafter square in the shape of a right-angled triangle has a robust stop on a side for exact 90 and 45 markings. In addition, the stop in conjunction with the robust edge also serves as a sawing aid or saw guide. Parallel to the stop there is a recess with a metric scale in mm and cm (offset scale), which is ideal for marking vertical lines. ~The measuring leg of the other catheter also has a metric scale, the quick one Measurements allowed. Below this scale there is a recess with notches with which horizontal or parallel lines can be marked. The hypotenuse has a degree scale for angle measurements between 0 and 90. The desired angle degree is determined starting from the opposite pivot point (designation on the rafter angle: PIVOT). ~ ~Parallel to the degree scale there is another recess with two scales for shifter cuts. The lower scale is for ordinary rafters or normal rafters (designation on the rafter angle: COMMON), the upper scale for hip rafters and valley rafters (designation on the rafter angle: HIP-VAL). A 90 marking aid for purlin cuts runs at right angles to the degree scale. ~Technical data:Item name: ~ Rafter angleMaterial: ~ AluminumSurface: ~ coatedColor: ~ blackSpecial feature: ~ Stop ~Roof rafter gaugeScaling: ~ mm/cm, ~1-piece, laseredScale grid: ~ 1 mmAngle dimension: ~ 45, 90, variable 0 - 90Scribing holes: ~ 0.5cm
Plastic tape measure
Length 50 m, labeled on both sides.
Pocket caliper DIN862 150 mm
with locking screw, beak length 40mm, scale and vernier matt chrome-plated, for inside, outside and depth measurement.
Professional voltage tester 110-250V 140mm
Commercial current tester with slot 3x60mm and total length 140mm with round blade.With WIHA Soft Finish handle made of transparent, impact-resistant plastic and blade made of high-quality chrome vanadium-molybdenum steel, hardened throughout, nickel coated, protective insulation sprayed directly onto the blade.Measuring range 110-250V against earth potential, so can be used worldwide! With metal clip
Refractometer
Optical tester for antifreeze and battery acid. For quick and precise checking of the antifreeze content of windshield and radiator water, as well as for checking battery acid. Measuring range for cooling water 0 to -50C. High measuring accuracy thanks to automatic temperature compensation. High-quality aluminum design in a case with foam insert.
Roll measuring tape 50m 13mm tape
Very accurate rolling measuring tape with a length of 50 m, good tape guidance, aluminum frame with ergonomic plastic handle and crank arm with long roll-up handle
Roll tape measure 5 m
Professional roll meter with yellow painted steel band 19mm. Impact-resistant red housing with gray protective coating. With belt clip. Accuracy class II EC.
Scriber 250mm curved
Made of high quality tool steel
Scriber with clip
High-quality scriber with replaceable HM tip and retaining clip.
Sliding gauge 150mm
High-quality sliding gauge scale and vernier matt chrome-plated for inside, outside and depth measurements, measuring range 0 -150mm, total length 225mm
Spirit level 40cm aluminum
made of aluminum ~powder-coated in silver measuring accuracy in normal position max. 0.5 mm/m patented ~mirror level ~- top view of the vertical level unbreakable acrylic glass block levels Milled measuring surface for spirit levels up to length 120 cm ~Other technical properties ~Colour: silver Material: aluminum Accuracy: 0.5mm/m
Spirit level Big X 3 120cm
Aluminum tube profile red powder-coated, profile weight approx. 630 g/linear meter, 1 horizontal level, 1 vertical level, 2 vertical levels.
Spirit level Magent 60cm
Better readability in dim light thanks to optimized SOLA luminous coating, very high measuring accuracy in normal and reverse positions, break-proof acrylic glass block levels with magnifying lens (+20%) and 30-year leak guarantee, extremely robust profile made of high-strength aluminum alloy for a long service life, shock-absorbing end cap.
Spirit level magnet
Better readability in dim light thanks to optimized SOLA luminous coating, very high measuring accuracy in normal and reverse positions, break-proof acrylic glass block levels with magnifying lens (+20%) and 30-year leak guarantee, extremely robust profile made of high-strength aluminum alloy for a long service life, shock-absorbing end cap.
Spirit level Torpedo 25cm magnet
Special magnetic spirit level with 360 rotatable angle level for easy measuring or transferring angles.The strong magnet and the V-groove ensure a secure hold even on round materials.Extremely robust Die-cast aluminum profile. Length 25 cm ~Adjustable 360 angle level for measuring and transferring angles. ~Level level can be locked for high precision, even if the spirit level is stored in the bag from time to time.Magnetic field The rare earth magnet is redirected through an iron plate for optimal holding force.Reinforced vials encased in a robust acrylic block for a long service life.Robust die-cast aluminum profile.Precise milled measuring surfaces, with V-groove for easy placement on round material.Holes for easy fixation on a Milwaukee tool lock when working at heights.The measuring accuracy is 0.029 (0. 5 mm/m).
Steel tape measure
Stable aluminum frame with handy plastic handle. Long, fold-back crank. Ribbon lacquered, 13 mm.
Stop angle
Ruler made of hardened spring steel 40x1.2mm, with mm graduations. Stop rail made of aluminum, black anodized, 40x14mm. Accuracy 0.5mm/m. Top quality, precise and at the same time easy to use.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
