The BAYCINEX® basic cleaner from the Höfer Chemie online store reliably removes even stubborn dirt from the floor and walls of your unfilled pool. The cleaning agent is particularly effective when diluted with warm water - this is also shown in comparative tests. However, the cleaner is also effective when used cold, both indoors and outdoors.

Depending on the degree of soiling, BAYCINEX® can be mixed with water in a ratio of 1:10 to 1:5 or used directly undiluted. After cleaning, the pool should be rinsed thoroughly with clear water to remove residues and prevent foaming when refilling.

Keeping the pool clean:

There are hard-to-reach areas in every swimming pool that are difficult to clean. These can be reached with a spray bottle, for example. When the pool pump is switched off, organic impurities sink to the bottom of the pool, from where they can be removed with a landing net. Nevertheless, an unpleasantly slippery film or calcified areas may remain at the end of the season, which can only be reliably removed with a suitable basic pool cleaner. For particularly stubborn residues, it is worth using high-pressure cleaners, as you are familiar with from outdoor pools. BAYCINEX® Pool Basic Cleaner diluted in water is suitable for all standard cleaning equipment:

Steam jets for the pool

Hot water cleaning devices

High-pressure cleaners

Please fill the appropriate amount of water into the tank before adding the required amount of basic cleaner.

Advantages of the basic pool cleaner:

Cleaning the pool floor is particularly necessary before winterizing and in spring before the swimming season. In just a few minutes, Höfer Chemie Pool Basic Cleaner dissolves all organic impurities that have accumulated on the pool floor in an empty or water-filled pool. With hard water, the use of BAYCINEX® Pool Bottom Cleaner also has the advantage that limescale residues are effectively removed. To ensure flawlessly clear pool water after refilling, you should also clean all connected pool filters. The filter cleaner from the BAYCINEX care range is ideal for this. Also suitable for the filter bowl of a sand filter system or in plastic 

Universal cleaner for pool & tiles:

Even though BAYCINEX® pool cleaner from the Höfer Chemie online store has been specially produced to meet the requirements of professional pool floor cleaning, the acidic cleaning fluid can also be used in the pool tile area or for cleaning the pool edge. Be sure to take note of the favorable ordering options at Höfer Chemie! You can secure attractive discounts when you buy six 1-liter bottles of BAYCINEX® Pool Basic Cleaner online, and you can order the excellent pool cleaner in stock in a package of 15 bottles for even less.

Application Basic cleaner for indoor and outdoor pools:

A dirty pool floor can be slippery! Please take care when entering the empty pool or use a suitable pool brush with a sufficiently long telescopic pole to clean the bottom of your pool from the outside. When using BAYCINEX® in a high-pressure cleaner, the angle should be taken into account to avoid skin contact due to splashing water. After use, the swimming pool stays fresh for longer because algae, limescale, dirt and other organic deposits are now thoroughly removed from the pool floor. Especially after the winter, pool cleaning with technical quality pool cleaners from Höfer Chemie ensures the best possible water quality.

Attention: Resistance tests should always be carried out before use. Appropriate protective clothing should be worn when handling. Danger ! H290: May be corrosive to metals. H315: Causes skin irritation. H318: Causes serious eye damage. H335: May cause respiratory irritation.

Further information:

Child safety cap: No

Storage: Protect from frost, store in original container in a cool, dry place

Shelf life: 36 months after opening