Agricultural machinery

Suitable for Simol support foot DG590/706/3SF, outer diameter: 35 mm, bore: 13 mm, 15 teeth.

Original ESM Carbodux blade, serrated version

With FEM 2 / ISO 2 mount for pallet fork carrier frame. With 2 carrier arms, a load of up to 1500 kg and a big bag size of up to 1000x1000 mm can be accommodated.Outreach: 900 mmWeight: 35 kgReception on pallet fork carrier: FEM 2 / ISO 2 Height fork carrier: 407 mm

Load capacity 1500 kg when using all 4 hooks, for big bags 900x900 mm and 1000x1000 mm, color anthracite gray, dimensions (LxWxH): 1275x1050x860 mm, weight: 90 kg

Triangular profile, fork attachment 1 3/8x6 with sliding pin, length = total length

Triangular profile, fork 1 3/8x6 with sliding pin, freewheel mounted on the device sideDirection of rotation right - use for e.g. Rear PTO shaft (PTO shaft stub running clockwise) Direction of rotation left - use for e.g. Front PTO shaft (PTO shaft stub left-hand running)

Triangular profile, slip-on fork 1 3/8x6 with sliding pin, freewheel mounted on the device side, e.g. for front PTO shaft

Triangular profile, attachment fork 1 3/8x6 with sliding pin

Upper knife, 27 blades, 6 of which are mushroom blades

Upper knife, 22 blades, including 5 mushroom blades

Bottom knife, 22 blades, including 4 mushroom blades

For trailers, flatbeds,... coarse-meshedMaterial PE, black, mesh size 30 x 30 mm, with elastic cord, incl. expander rope and PVC storage bag.TÜV SÜD certified

for eccentric lock 6043

​Weld-on cup including sealing ring.4 inch = DN100, cup width B = 130 mm5 inch = DN120, cup width B = 150 mm6 inch = DN150, cup width B = 180 mm8 inch = DN200, cup width B = 200 mm

Black steel weld-on male without clamping ring. Suitable for the Italian system according to the listed nominal diameters.4 inch = DN100, ball outside diameter D = 130mm5 inch = DN120, ball outside diameter D = 150mm6 inch = DN150, ball outside diameter D = 180mm8 inch = DN200, ball outside diameter D = 243mm

80x50x3 mm, recessed at the bottom

A=51, B=31, C=81mm Distance between center of rivet holes and back of blade 16mm

A=51, B=31, C=76, 7.0mmsunk at the bottom

Original ESM Carbodux blade with knob, serrated design

with screw for 3 mm blades

Blade bolt suitable for BCS and Vogel &~ Noot for mowers with 4mm blades.

Blade bolt complete with screw and nut

Blade bolt complete with screw and nut