Agricultural machinery
All Products
Length: 140 mm, profile outside - inside: 1 1/8x6 - 1 3/8x6
Length: 150 mm, profile outside - inside: 1 3/8x6 - 1 3/8x21
Length: 150 mm, profile outside - inside: 1 3/8x6 - 1 3/8x21.
Zapfwellenverlängerung mit Schiebestift/Druckknopf
With flange 120 mm, for 1 3/8 x 6 and 1 3/4 x 6 profile, length 100 mm.
Outer diameter 141.00 mm Inner diameter 105.50 mm Height 21.00 mm
Bore 22 mm. Total length 100mm.
For attaching to oil engines. Bore diameter 25 mm, keyway 8 mm.
12/24 V - 150 W for wall thickness up to 2 mm, 2 screw terminals, switching positions: 0-1.
12V/120W, e.g. for rear fog light, with 3 flat plugs, installation dimension 10mm, switching position 0-1
Used to attach the hydraulic pumps to the electric motor. Material: aluminum
Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.
Installation dimensions (xH) = 30x54 mmSuitable for Fendt, Steyr 80 series, 900 series
With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!
For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!
Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A
Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A
12/24 V - 150 W for wall thickness up to 8 mm with rubber cap, 2 screw terminals, switching position: 0-1, thread 22 mm
The pushbutton is a normally open contact. This means that when the pushbutton is pressed, the circuit is closed and current can flow in the working circuit. The pushbutton has an installation thread M12x0.75mm. The maximum switching capacity is 8 A.Suitable for Faie handles no. 34623, 34624, 34625 and 22800
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
