Agricultural machinery
All Products
E.g. loading wagons, manure spreaders, manure removal systems, conveyor systems. Price per meter.
In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.
Gummipuffer für Sitz Steyr Plus Serie
Bearing block for headlight holder, suitable for right and left, Dimensions: 70x40x26, thread M8
Matching top trim stripColor: Beige
Rubber cross for the flexible claw couplings from OMT
Outer diameter: 15 mmInner diameter: 9 mmLength: 34 mm
With 2 fabric inserts for higher pressures, thickness 5 mm, 180x180x5 mm, hole spacing 150x150 mm.
With 2 fabric inserts for higher pressures, thickness 5 mm, 228x228x4 mm, hole spacing 180x180 mm.
Use between oil bath air filter and intake manifold 50 x 50mm
Spare parts set suitable for FASTER oil collection system.
External dimensions: 156 x 70 x 59 mmInternal dimensions: 48 x 38 mm
External dimensions: 130 x 52 x 63 mmInternal dimensions: 40 x 30 mm
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
