Agricultural machinery

To close a hydraulic connection, ie a double-acting cylinder becomes a single-acting cylinder.

Surface untreated.

According to DIN 2353, for pipe connection.

According to DIN/ISO228.

Colour blue

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

20mm

Bore 12mm, length 99mm

Bore 12 mm, length 70 mm

Total length: 136 mmDiameter: 25 mm

M16x2x100 mm bolt with lock nut, strength 10.9, thread length 40 mm. Suitable for Agricom, Ferri, Gaspardo, Kverneland, M.E.A.A.T., Maletti, Maschio and Votex.

Bolt with tab galvanized, there is an additional hole in the tab to secure the bolt against twisting or loss

Suitable for Steyr 80 series with Bosch alternator 33AReplacement regulator for common Bosch alternators

Suitable for BUSATIS mower Bidux 1205

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Lens: Clear, right/left

​Bottom knife for Busatis BM 321 KW double cutter bar with a total number of 20 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The positions of the blades with knob, starting from the cutterhead, are on the 5th, 10th and 15th blade. The last blade is an end blade that is ground on both sides. A cutter head plate is riveted to the lower cutter head. The pitch of the blades from blade centre to blade centre is 76 mm. The knife is supplied complete with the lower cutter head, on the left-hand side when viewed in the direction of travel. 

​Bottom blade for Busatis double knife bar with a total number of 22 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted-on lower blade head, on the right-hand side when viewed in the direction of travel. Suitable for Moty Gigant motorised mowers with Busatis double blade mower. Overall length with cutterhead: 166 cm Length of cutter back: 166 cm Cutter head on the right in the direction of travel, offset 25 mm inwards Cutterhead length: 207 mm Total number of blades: 22, of which 4 blades with knob Position of the blades with knob starting from the cutter head: 4th, 9th, 14th and 19th blade Blade pitch (blade centre to blade centre): 76mm