Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage
Seal: Austrian online shop Seal: “Excellent Shopping – Top Company”
€0.00

Agricultural machinery

Vehicle construction

Agricultural machinery spare parts

Tractor parts

Hydraulic program

Skip product gallery

Our offer

21294
Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,295.00*
-24 %
FA117928
Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)
2549
Cooking tines without a share

Tine material 25x8.

€8.79*
-13 %
FA54554
Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
-26 %
FA107995
Cutter head screw M8x1x20

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

€1.69* €2.29* (26.2% saved)
-40 %
FA63556
Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-5 %
FA2521
Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
-10 %
FA2531
Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
72983
Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-31 %
47888
Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

All Products

FA102331
Shackle turned 80x48.5mm, � 11mm

Twisted shackle 80x48.5mm, 11mm, suitable for Mulag

€9.29*
51798
Shaft seal ASL with dust lip
A (mm): 72 I (mm): 35 Thickness (mm): 10

WellendichtringASLmit Staublippe, NBR 70 Shore, DIN3760BauformASL: Aussenmantel gummiertmit Staublippe Temperaturbeständig von -40 °C bis max. +100 °C Druckbereich bis max. 0,5 bar Umfangsgeschwindigkeit(m/s): ≤ 12Versteifungsring: unlegierter Stahl nach DIN EN 10139Zugfeder: unlegierter Federstahl nach DIN EN 10270-1Radial-Wellendichtring WDR in der ASL-Ausführungin Anlehnung an dieDIN3760 mit einem elastomeren Außenmantel und einem metallischen Versteifungsringsowie einer federunterstützten Dichtlippe und zusätzlich mit einer Staublippeausgestattet. Radial-Wellendichtringe sind im allgemeinen für dendrucklosen Betrieb ausgelegt. Werden zur Abdichtung von rotierenden Maschinenelementen, wie z. B. Wellen, Naben, Achsen,... verwendet

€8.49*
FA107217
Shaft seal control rod Steyr T80, T84, T86

for union nutitem no. 45

€4.99*
FA63896
Frank Original Shard tip

suitable for Landsberg-Pttinger, Einbck

€26.90*
27077
Frank Original Shard tip
Version: right can be used instead of Pöttinger: 1903682, 041662Z, 940.95.021.0

€49.90*
FA63897
Frank Original Shard tip

suitable for Landsberg-Pttinger, Einbck

€32.00*
FA63898
Frank Original Shard tip

suitable for Landsberg-Pttinger, Einbck

€32.00*
FA55535
Share 105 mm

Standard share suitable for harrow tines and cultivator tines.

€3.00*
FA63889
Share 24x5x175

to Vogel and Noot Garezinken

€2.99*
FA70190
Share 50x265x6 mm

2-hole

€12.50*
FA58252
Share 52x7x300

Suitable for cultivating harrow tine 70x12.

€12.90*
58652
Share 6 mm
Length (mm): 210

€2.99*
Variants from €1.99*
FA34399
Frank Original Share blade 380 mm, left, armored on the underside

suitable for Lemken series Smaragd

€49.90*
FA34398
Frank Original Share blade 380 mm, right, armored on the underside

suitable for Lemken series Smaragd

€49.90*
28055
Share curved
Size (mm): 35 x 5 x 135

€1.85*
FA34393
Share point S12P, armored on the underside

suitable for Lemken series Smaragd

€32.90*
-20 %
70194
share screw
Ø x length (M): M12x60

with square approach

€0.95* €1.19* (20.17% saved)
Variants from €0.79*
FA7987
Share screw M10x40

From €0.31*
to the product
FA58255
Share screw M10x60, 10.9

with square approach

From €1.10*
to the product
FA44566
Share screw M8x35 for cooking tines and cultivating harrow tines

€0.70*
8095
Share screw with 2 lugs DIN11014
C (mm): 7 G (Divers): 3,6 mm M (mm): 10 S (mm): 19 Strength: 12.9 Ø D (mm): 24 Ø x length (M): M12x35

suitable for Heger, KMF, Landsberg, Pttinger, Vogel &~ Noot

€1.15*
Variants from €0.59*
6929
Share screw with oval head
C (mm): 7 G (Divers): 13,6 mm M (mm): 8 S (mm): 17 X: 20 ° Ø A (mm): 15,95 Ø x length (M): M10x25

Matching Frost, Kverneland, Raven, Regent, Bird &~ Noot

€1.00*
Variants from €0.71*
1270
Share screw with oval head
C (mm): 7 G (Divers): 17 mm M (mm): 11 S (mm): 22 Ø A (mm): 18 Ø x length (M): M14x34

suitable for Kverneland, Regent, Vogel &~ Noot

€1.40*
FA8097
Share screw with square attachment DS6006

€1.15*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.
- Imprint